Optimization of bitumen formulations using mixture design of experiments (MDOE)
Source abstract
Abstract
Abstract This work addresses the preparation of bitumen blends using asphaltic residue, vacuum residue, and three aromatic extracts (by-products) from the refining process of base oils. A constrained mixture design was adopted to guide bitumen formulation. The measured responses were fitted to Scheffe polynomial models, namely a quadratic model for the penetration value and a linear model for the softening point. Both models were validated using ANOVA. In a second stage the quadratic model was used to design formulations with a precise penetration value. The predicted and measured responses demonstrate the accuracy of both models with average deviations of only 4.67% and 1.53% for penetration and softening point, respectively. In the whole, mixture design has been shown to be a successful and essential tool for bitumen formulation especially if the blends involve a large number of components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Petroleum Processing and Analysis · Probabilistic and Robust Engineering Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Rheological effects on bitumen of polyphosphoric acid (PPA) addition10.1016/j.conbuildmat.2012.11.001 ↗
2. Brief review of the chemistry of polyphosphoric acid (PPA) and bitumen10.1021/ef800120x ↗
3. The colloidal structure of bitumen: consequences on the rheology and on the mechanisms of bitumen modification10.1016/j.cis.2008.08.011 ↗
4. Read · 2003
5. Base oils from petroleum
6. Bitumen in colloid science: a chemical, structural and rheological approach10.1016/S0016-2361(98)00054-4 ↗
7. Influence of chemical composition on the physical characteristics of paving asphalts10.1080/10916460500528854 ↗
8. Design of eutectic photoinitiator blends for UV/visible curable acrylated printing inks and coatings10.1016/S0300-9440(99)00052-1 ↗
9. The optimal mixture design of experiments: alternative method in optimizing the aqueous phase composition of a microemulsion10.1016/j.chemolab.2011.10.008 ↗
10. Cornell · 2011
11. Montgomery · 2008
12. Mixture design—design generation, PLS analysis, and model usage10.1016/S0169-7439(98)00126-9 ↗
13. Determination of the optimum binder content of warm mix asphalt incorporating Rediset using response surface method10.1016/j.conbuildmat.2013.06.023 ↗
14. Combined (alkaline+ultrasonic) pretreatment effect on sewage sludge disintegration10.1016/j.watres.2010.02.032 ↗
15. Sinha · 2014
16. The use and importance of design of experiments (DOE) in process modelling in food science and technology
17. Development of response surface model for tensile shear strength of weld-bonds of aluminium alloy 6061 T65110.1016/j.matdes.2011.05.025 ↗
18. Modelling of the performance of asphalt pavement using response surface methodology10.1016/j.buildenv.2004.09.002 ↗
19. Modelling of the performance of asphalt pavement using response surface methodology—the kinetics of the aging10.1016/j.buildenv.2005.10.013 ↗
20. Effect of grading and lime content on HMA stripping using statistical methodology10.1016/j.conbuildmat.2012.02.025 ↗
21. Moisture susceptibility of warm mix asphalt: a statistical analysis of the laboratory testing results10.1016/j.conbuildmat.2013.10.073 ↗
22. Myers · 2009
23. Optimization and experiments: a survey10.1115/1.3099014 ↗
24. D-optimal designs10.1016/0169-7439(94)00076-X ↗
25. Influence of polyphosphoric acid on the consistency and composition of formulated bitumen: standard characterization and NMR insights10.1155/2016/2915467 ↗
26. Bitumen in colloid science: a chemical, structural and rheological approach10.1016/S0016-2361(98)00054-4 ↗
27. Influence of chemical composition on the physical characteristics of paving asphalts10.1080/10916460500528854 ↗
28. Certain relationships between chemical composition and properties of petroleum asphalts from different origin10.2516/ogst:2006043a ↗