journal article·2017-12

Effects of Ca-, Mg-, K-, and Na-lignosulfonates on the behavior of fresh concrete

Hasan Şahan Arel, Ertug Aydin

Publisher page

Abstract

Abstract Lignosulfonates are waste products of the pulp and paper industry. The effects of various metal-cation-containing lignosulfonate-based plasticizers on the properties of concrete mixtures produced using cements with various Ca(SO4)·2H2O, tricalcium aluminate, and tetracalcium aluminoferrite contents were investigated. A-type cement, which had lower tricalcium aluminate and alkaline contents, greater fineness, and higher SO3 content than B-type cement, exhibited better water reduction. Setting times of A-type cement and its lignosulfonate mixtures were shorter than those of B-type cement by 9–11%. The highest 28-day compressive strength of 41 MPa was found for A-type cement with a calcium-lignosulfonate salt admixture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Materials Engineering and Processing · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Preparation and properties of nitrogen-containing hollow carbon nanospheres by pyrolysis of polyaniline-lignosulphonate composites10.1016/j.jaap.2011.05.009 ↗
2. Othmer · 2005
3. The effect of cement type and plasticizer addition on concrete properties10.1016/j.conbuildmat.2013.03.076 ↗
4. The effect of lignosulfonates on concretes produced with cements of variable fineness and calcium aluminate content10.1016/j.conbuildmat.2016.11.089 ↗
5. Combination of lignosulphonate and AMPS®-co-NNDMA water retention agent – an example for dual synergistic interaction between admixtures in cement10.1016/j.cemconres.2012.02.009 ↗
6. Preparation and performance of a lignosulphonate-AMPS-itaconic acid graft copolymer as retarder for modified phosphoaluminate cement10.1016/j.conbuildmat.2014.02.064 ↗
7. Modification of lignin and its application as char agent in intumescent flame-retardant poly (lactic acid)10.1002/pen.23214 ↗
8. Ramachandran · 1996
9. Modification of interactions in polypropylene/lignosulfonate blends10.1016/j.matdes.2016.04.061 ↗
10. Early hydration of C3A-gypsum pastes with Ca- and Na-lignosulfonate10.1016/j.cemconres.2015.10.008 ↗
11. Influence of plasticizers on the rheology and early heat of hydration of blended cements with high content of fly ash10.1016/j.cemconcomp.2015.10.005 ↗
12. M.C.F. Toledo, P.M. Kuznesof, Calcium lignosulfonate: Chemical and technical assessment, http://www.fao.org/fileadmin/templates/agns/pdf/jecfa/cta/69/Calcium_Lignosulfonate__40_65.pdf.
13. https://pubchem.ncbi.nlm.nih.gov/compound/24711#section=Top.
14. Erdogan · 1997
15. Observation in testing and use of water-reducing retarders
16. X. Qiu, Effect of calcium lignosulphonate on the hydration of the tricalcium aluminate–anhydrite system10.1016/j.cemconres.2012.08.008 ↗
17. Hydration study of slag-blended cement based on thermodynamic considerations10.1016/j.conbuildmat.2016.07.138 ↗
18. Efflorescence formation and control in alkali-activated phosphorus slag cement10.1007/s40999-016-0027-0 ↗
19. Hydration of tricalcium aluminate with lignosulphonate additives10.1680/macr.1962.14.42.137 ↗
20. Akman · 1999
21. T. Danner, H. Justnes, M. Geiker, R.A. Lauten, Effect of lignosulphonate plasticizers on the hydration of C3A, 14th International Congress on the Chemistry of Cement, Beijing, China, 2015.
22. Investigating the resistance of alkali-activated slag mortar exposed to magnesium sulfate attack
23. Adsorption of PCE and PNS superplasticisers on cubic and orthorhombic C3A: effect of sulfate10.1016/j.conbuildmat.2014.12.050 ↗
24. Modification of the rate of formation and surface area of ettringite by polycarboxylate ether superplasticizers during early C3A-CaSO4 hydration10.1016/j.cemconres.2014.12.007 ↗
25. Ettringite formation: a crucial step in cement superplasticizer compatibility10.1016/S0008-8846(02)01042-6 ↗
26. T. Nawa, H. Eguchi, Effect of cement characteristics on the fluidityof cement pastes containing an organic admixture, 9th Int. Congress on the Chemistry of Cement, New Delhi, 4, 1992, pp. 597-603. Avaliable from PRO 7: 1st International RILEM Symposium on Self-Compacting Concrete.
27. Effect of Blaine fineness reversal on strength and hydration of cement10.1016/0008-8846(90)90030-2 ↗
28. Effect of high dosage lignosulphonate and naphthalene sulphonate based plasticizer usage on micro concrete properties10.1016/j.conbuildmat.2016.05.112 ↗
29. Study on the effectiveness of PNS and LS superplasticizers in air lime-based mortars10.1016/j.cemconres.2015.12.006 ↗
30. The effect of superplasticers on the workability and compressive strength of concrete made with fine recycled concrete aggregates10.1016/j.conbuildmat.2011.10.050 ↗
31. K. Reknes, The Chemistry of Lignosulphonate and the Effect on Performance of Lignosulphonate Base Plasticizers and Superplasticizers, 29th CONFERENCE on our World in Concrete and Structures, 25–26 August 2004, Singapore.
32. TS 706 EN 12620+A1, Aggregates for Concrete, Ankara, Turkey, 2009.
33. TS EN 1097-6, Tests for Mechanical and Physical Properties of Aggregates – Part 6: Determination of Particle Density and Water Absorption, Ankara, Turkey, 2013.
34. TS EN 12390-2, Testing Hardened Concrete – Part 2: Making and Curing Specimens for Strength Tests, Ankara, Turkey, 2010.
35. TS 2987, Determination of the Concrete Setting Time by Measurement of Penetration Resistance, Ankara, Turkey, 2011.
36. TS EN 12350-7, Testing Fresh Concrete – Part 7: Air Content of fresh Concrete – Pressure Methods, Ankara, Turkey, 2010.
37. TS EN 12350-2, Testing Fresh Concrete – Part 2: Slump Test, Ankara, Turkey, 2010.
38. TS EN 12390-3, Concrete – testing Hardened Concrete – Part 3: Compressive Strength of Test Specimens, Ankara, Turkey, 2010.
39. Influence of cement fineness and water-to-cement ratio on mortar early-age heat of hydration and set times10.1016/j.conbuildmat.2013.10.011 ↗
40. New developments in the commercial utilization of lignosulphonates
41. Influence of cement and superplasticizer type and dosage on the fluidity of cement mortars – part I10.1016/S0008-8846(02)00839-6 ↗
42. Calorimetry, rheology and compressive strength of superplasticized cement paste10.1016/0008-8846(93)90048-E ↗
43. TS EN 934-2, Admixtures for Concrete, Mortar and Grout – Part 2: Concrete Admixtures: Definitions and Requirements, Ankara, Turkey, 2010.
44. Physicochemical characterization of calcium lignosulfonate: a potentially useful water reducer10.1016/j.colsurfa.2005.12.020 ↗