journal article·2018-02Open access

Empirically derived connection design properties for Guadua bamboo

David J.A. Trujillo, Dominika Malkowska

Abstract

Abstract Three connection design properties (dowel embedment strength, slip modulus and screw withdrawal capacity) were determined for one species of bamboo (Guadua angustifolia Kunth) using experimental methods adopted from timber engineering. 151 embedment strength and slip modulus tests were undertaken using smooth dowels with diameters ranging from 3 to 16 mm, whilst 240 screw withdrawal tests were undertaken using 3.5–5 mm diameter self-tapping screws. Using regression analysis, predictive equations for the three connection design properties were derived, based on fastener diameter, density and bamboo wall thickness. Coefficients of determination (R2) ranged from 0.45 to 0.82. The predictive equations for embedment strength and screw withdrawal were adapted to output characteristic values and then compared to similar equations derived for timber contained in Eurocode 5, the latter would seem inappropriate for bamboo.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bamboo properties and applications · Wood Treatment and Properties · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. L. Kuehl, K. Yiping, Carbon Off-setting with Bamboo, INBAR Working Paper 71, International Network for Bamboo and Rattan INBAR, Beijing, P.R. China, 2012.
2. Janssen · 2000
3. ISO (International Organization for Standardization), ISO 22156:2004 bamboo – structural design, Geneva, 2004.
4. AIS (Asociación Colombiana de Ingeniería Sísmica), NSR-10-Reglamento colombiano de construcción sismo resistente - Capítulo G.12: Estructuras de guadua, Bogotá (in Spanish), 2010.
5. J. Farbiarz, Estudio sobre el Comportamiento de Conexiones con Guadua’ (Study about guadua connection behaviour), Boletín técnico, Asociación Colombiana de Ingeniería Sísmica, p. 56 (in Spanish), 2001.
6. Bamboo trusses with low cost and high ductility joints10.4236/ojce.2012.24030 ↗
7. Bolted bamboo joints reinforced with fibers10.1016/j.proeng.2014.12.160 ↗
8. CEN (European Committee for Standardization), EN 1995-1-1:2004+A2 - Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings, Brussels, 2014.
9. Theory of timber connections
10. C.P. Heine, Simulated response of degrading hysteretic joints with slack behavior (Doctoral dissertation, Virginia Polytechnic Institute and State University), 2001.
11. Analysis of nailed joints with dissimilar members10.1061/JSDEAG.0003329 ↗
12. L.R.S. Whale, I. Smith, The derivation of design values for nailed and bolted joints in Eurocode 5, in: Proceedings of 19th CIB W18 Meeting, 1986.
13. H.J. Blaß, I. Bejtka, T. Uibel, Tragfähigkeit von Verbindungen mit selbstbohrenden Holzschrauben mit Vollgewinde., Bd. 4. Karlsruher Berichte zum Ingenieurholzbau, Universitatsverlag Karlsruhe, Karlsruhe. (in German), 2006.
14. M. Frese, H.J. Blass, Models for the Calculation of the Withdrawal Capacity of Self-Tapping Screws, in: Proceedings of the 42nd CIB W18 Meeting, 2009.
15. U. Hübner, Withdrawal strength of self-tapping screws in hardwoods, in: Proceedings of the 46th CIB W18 Meeting, 2013.
16. Dowel-bearing strength behavior of glued laminated Guadua bamboo10.1061/(ASCE)MT.1943-5533.0000515 ↗
17. A. Awaludin, Aplikasi EYM Model Pada Analisis Tahanan Lateral Sambungan Sistim Morisco-Mardjono: Sambungan Tiga Komponen Bambu Dengan Material Pengisi Rongga, in: Proceedings of Nasional Rekayasa dan Budidaya Bambu Symposium, Yogyakarta, 2012, p. 6 [in Indonesian].
18. Design and experimental verification of easily constructible bamboo footbridges for rural areas10.1016/j.engstruct.2017.04.044 ↗
19. J.F. Correal, J.S. Echeverry, Dowel-Bearing Strength Behaviour of Guadua angustifolia Kunth Bamboo, in: Proceedings of 16th NOCMAT conference, Winnipeg, 2015.
20. D.J.A. Trujillo, Axially Loaded Connections in Guadua Bamboo, in: Proceedings of 11th NOCMAT conference, Bath, 2009.
21. ISO (International Organization for Standardization), ISO 22157–1:2004 bamboo – determination of physical and mechanical properties – part I: requirements, Geneva, 2004.
22. Flexural properties as a basis for bamboo strength grading10.1680/jstbu.16.00084 ↗
23. Whale · 1985
24. CEN (European Committee for Standardization) EN 383:2007 Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners, Brussels.
25. ASTM International, ASTM D 5764-97a Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products, West Conshohocken, 1997.
26. S. Franke, N. Magniére, Discussion of testing and evaluation methods for the embedment behaviour of connections, in: Proceedings of the 47th CIB W18 meeting, 2014.
27. CEN (European Committee for Standardization), EN 1382:2016 Timber Structures –Test methods – Withdrawal capacity of timber fasteners, Brussels, 2016.
28. Fine tuning some resistant rules for outlier labeling10.1080/01621459.1987.10478551 ↗
29. D. Trujillo, L.F. López, Chapter 13: Bamboo material characterisation in Nonconventional and Vernacular Construction Materials: Characterisation, Properties and Applications (editors: Harries, K.A. and Sharma, B.) Woodhead (Elsevier) Publishing, ISBN-13: 978-0-08-100038-0, 2016.
30. J. Correal, J. Arbeláez, Influence of age and height position of Colombian Guadua bamboo mechanical properties, Maderas: Ciencia y Tecnología 12(2) (2010):105–113, Chile.10.4067/S0718-221X2010000200005 ↗
31. CEN (European Committee for Standardization) EN 14358-2016 Timber structures — Calculation and verification of characteristic values, Brussels.
32. ISO (International Organization for Standardization), ISO 10984-2:2009 Timber structures — Dowel-type fasteners — Part 2: Determination of embedding strength, Geneva, 2004.