Empirical and NLFEA prediction of bond-slip behavior between DSSF concrete and anchored CFRP composites
Source abstract
Abstract
Abstract A precise bond-slip model between discontinuous structural synthetic fibers (DSSF) concrete and anchored carbon fiber reinforced polymer (CFRP) is of primary importance in the reaching the ultimate strength of CFRP composites as well as the modeling of Reinforced concrete (RC) structures strengthened with CFRP composites. In this paper, a new bond slip model is proposed in terms of DSSF content (0, 3, and 5 kg/m3 equivalent to fiber volume fractions (Vf) of 0%, 0.33%, and 0.55%, respectively), CFRP bonded length (Lf) (50, 75, and 100 mm), CFRP bonded width (bf) (50, 75, and 100 mm), and anchored system (with and without a CFRP anchoring strip width (bfA) of 25 mm and length (LfA) of 150 mm). This proposed model is then assessed using experimental test results on anchored CFRP-DSSF concrete bonded blocks subjected to double-shear pull-off test, existing bond-slip models in the literature, and database of pull tests published by several researchers. After that, the anchored CFRP-DSSF concrete bonded blocks were modeled and analyzed using nonlinear finite element analysis (NLFEA). After realistic validation with the experimental test results, NLFEA was expanded to proposed an expression for the influence of anchored CFRP sheet in terms of bfA (25, 50, 75, and 100 mm) and LfA (100, 125, and 150 mm) on the proposed bond-slip model. The special characteristic of the present study is that the new proposed bond-slip model is based on anchored CFRP composite and DSSF concrete; instead, the existing bond-slip models are based on CFRP composite without anchorage and ordinary concrete. Finally, the proposed bond-slip model is provided an accurate prediction of the large test database of bond strength and corresponding slippage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. ACI Committee 544, Report on Fiber Reinforced Concrete (ACI 544.1R-96- Reapproved 2009). American Concrete Institute. Farmington Hills, MI. 1996: 66 pp.
2. Flexural strength design criteria for concrete beams reinforced with high-strength steel strands10.1260/1369-4332.15.10.1781 ↗
3. Fracture behavior of concrete members reinforced with structural synthetic fibers10.1016/j.engfracmech.2006.01.032 ↗
4. Jiabiao · 2004 · 26
5. An experimental investigation on mechanical behavior of macro synthetic fiber reinforced concrete
6. Effect of synthetic fibers on structural behavior of concrete slabs-on-ground
7. Effect of steel and synthetic fibers on flexural behavior of high-strength concrete beams reinforced with FRP bars10.1016/j.compositesb.2012.01.044 ↗
8. The effects of macro synthetic fiber reinforcement use on physical and mechanical properties of concrete10.1016/j.compositesb.2014.01.043 ↗
9. Influence of synthetic fibers on the shear behavior of lightweight concrete beams10.1177/1369433217691773 ↗
10. Flexural strengthening of concrete beams using CFRP, GFRP and hybrid FRP sheets10.1016/j.conbuildmat.2012.07.052 ↗
11. Behaviour of reinforced concrete beams strengthened by CFRP wraps with and without end anchorages
12. Fatigue performance of reinforced concrete beams strengthened with CFRP sheets10.1016/j.conbuildmat.2011.03.045 ↗
13. Teng · 2002
14. An experimental investigation into the bond-slip behaviour between CFRP composite and lightweight concrete
15. Effects of applied environmental conditions on the pull-out strengths of CFRP-concrete bond
16. Prediction of ultimate load at the CFRP-concrete interface under pure shear mode
17. FRP-strengthened RC structures-II: assessment of debonding strength models10.1016/S0141-0296(01)00106-7 ↗
18. Shear-bending interaction in debonding failures of FRP-plated RC beams10.1260/136943303322419214 ↗
19. Intermediate crack-induced debonding in RC beams and slabs10.1016/S0950-0618(03)00043-6 ↗
20. A structural engineering approach to adhesive bonding longitudinal plates to RC beams and slabs10.1016/S1359-835X(03)00153-2 ↗
21. Effect of concrete composition on FRP/concrete bond capacity10.1061/(ASCE)1090-0268(2007)11:6(611) ↗
22. Experimental observation on bond-slip behavior between concrete and CFRP plate10.4334/IJCSM.2007.1.1.037 ↗
23. Width effect in the interface fracture during shear debonding of FRP sheets from concrete10.1016/j.engfracmech.2006.09.002 ↗
24. Bond-slip behavior between carbon fiber reinforced polymer sheets and heat-damaged concrete10.1016/j.compositesb.2012.09.010 ↗
25. Effective bond length of FRP sheets externally bonded to concrete10.4334/IJCSM.2009.3.2.127 ↗
26. Effective bond length of FRP-to-concrete adhesively-bonded joints: experimental evaluation of existing models10.1016/j.ijadhadh.2013.09.022 ↗
27. Effect of using carbon nanotube modified epoxy on bond-slip behavior between concrete and FRP sheets10.1016/j.conbuildmat.2015.12.183 ↗
28. An experimental investigation into the bond-slip behavior between CFRP composite and lightweight concrete10.1016/j.conbuildmat.2016.03.032 ↗
29. Influence of surface roughness on the bond of FRP laminates to concrete10.1016/j.conbuildmat.2012.09.112 ↗
30. Bond behavior of roughing FRP sheet bonded to concrete substrate10.1016/j.conbuildmat.2014.09.057 ↗
31. Bond-slip on CFRP/GFRP-to-concrete joints subjected to moisture, salt fog and temperature cycles10.1016/j.compositesb.2013.06.015 ↗
32. Bond slip behavior of anchored CFRP strips on concrete surfaces10.1016/j.conbuildmat.2016.07.060 ↗
33. Investigation into CFRP laminate anchorage systems utilizing bi-directional fabric wrap10.1016/j.compstruct.2010.10.012 ↗
34. An anchorage system for CFRP strips bonded to thermally shocked concrete10.1016/j.ijadhadh.2016.08.003 ↗
35. AlShuqari · 2017
36. Bond-slip models for FRP sheets/plates bonded to concrete10.1016/j.engstruct.2005.01.014 ↗
37. Effect of sulfates on bond behavior between carbon fiber reinforced polymer sheets and concrete10.1016/j.matdes.2012.07.018 ↗
38. FRP adhesion in uncracked and cracked concrete zones10.1142/9789812704863_0015 ↗
39. U. Neubauer, F.S. Rostasy, Design aspects of concrete structures strengthened with externally bonded CFRP plates. In: Proc. of 7th international conference on structural faults and repair, vol. 2. Edinburgh (Scotland): ECS Publications; (1997) 109–118.
40. Bond characteristics of CFRP sheets in the CFRP bonding technique
41. Zhao · 2004
42. Tan · 2002
43. Ren · 2003
44. Experimental study on bond strength of continuous carbon fiber sheet
45. ANSYS: ANSYS User's Manual Revision 12.1, ANSYS, Inc. Canonsburg, Pennsylvania.
46. Flexural members with confined concrete
47. Distribution and orientation of fibers in steel fiber reinforced concrete