Retardation effect of elevated temperature on the setting of calcium sulfoaluminate cement clinker
Source abstract
Abstract
Abstract The hydration of calcium sulfoaluminate (CSA) clinker at 5, 20 and 40 °C was characterized by a combination of XRD, DTA-TG and ESEM analysis (also with backscattered electron imaging, BEI). Meanwhile, the setting times and compressive strength development were studied. It was interesting to notice that elevated temperature retards the setting of CSA clinker and decreases compressive strength prominently, while it promotes the hydration heat releasement and hydration degree. With the temperature rising from 5 °C to 40 °C, the amount of ettringite formed after 1 d decreases by half, but alumina gel increases by more than 4 times, accompanying with a more inhomogeneous microstructure and higher porosity. ESEM observations indicate that such massive alumina gel covers on the unreacted particles and other hydrates, which could account for the retardation of elevated temperature on the setting of CSA clinker.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. The impact of intrinsic anhydrite in an experimental calcium sulfoaluminate cement from a novel, carbon-minimized production process10.1617/s11527-017-1012-z ↗
2. Calcium sulfoaluminate (Ye'elimite) hydration in the presence of gypsum, calcite, and vaterite10.1016/j.cemconres.2014.07.004 ↗
3. Z. L., Microstructure and performance of calcium sulfoaluminate cements, University of Aberdeen, Aberdeen, 2000.
4. Su · 1999
5. Utilisation of phosphogypsum for sulfate-rich belite sulfoaluminate cement production10.1680/adcr.14.00071 ↗
6. Waste phosphogypsum – toward sustainable reuse in calcium sulfoaluminate cement based building materials
7. Utilization of municipal solid waste incineration fly ash for sulfoaluminate cement clinker production10.1016/j.wasman.2011.04.022 ↗
8. Preparation of the saving-energy sulphoaluminate cement using MSWI fly ash10.1016/j.jhazmat.2009.03.134 ↗
9. Steelmaking slags as raw material for sulphoaluminate belite cement10.1680/adcr.2007.19.4.147 ↗
10. Microwave sintering of sulphoaluminate cement with utility wastes10.1016/S0008-8846(01)00579-8 ↗
11. Preparation of sulfoaluminate belite cement from fly ash10.1016/0008-8846(94)90030-2 ↗
12. Early age hydration of calcium sulfoaluminate (synthetic ye'elimite) in the presence of gypsum and varying amounts of calcium hydroxide10.1016/j.cemconres.2013.03.001 ↗
13. X. Yongmo, H. Shuguang, S. Zhonghe, Proceedings of the First International Conference on Sulphoaluminate Cement: Materials and Engineering Technology, Wuhan University of Technology Press, Wuhan, China, 2013.
14. F. Winnefeld, B. Lothenbach, Phase equilibria in the system Ca4Al6O12SO4-Ca2SiO4 -CaSO4-H2O referring to the hydration of calcium sulfoaluminate cements, RILEM Technical Letters, RILEM France, 2016, pp. 10–16.10.21809/rilemtechlett.2016.5 ↗
15. The paste hydration of 4CaO·3Al2O3·SO3 in presence of calcium sulphate, tricalcium silicate and dicalcium silicate10.1016/0008-8846(72)90043-9 ↗
16. Hydration in the system C4A3S‾-CS‾H2-CH-H10.1007/BF02135035 ↗
17. Influence of calcium sulfate and calcium hydroxide on the hydration of calcium sulfoaluminate clinker
18. Impact of anhydrite proportion in a calcium sulfoaluminate cement and Portland cement blend10.1680/adcr.13.00051 ↗
19. Hydration of calcium sulphoaluminate clinker with additions of different calcium sulphate sources10.1617/s11527-014-0510-5 ↗
20. Calorimetric and thermogravimetric study on the influence of calcium sulfate on the hydration of ye’elimite10.1007/s10973-009-0582-6 ↗
21. Applications of an eight-channel isothermal conduction calorimeter for cement hydration studies
22. Chloride ingress in a belite-calcium sulfoaluminate cement matrix10.1016/j.cemconres.2017.02.013 ↗
23. Physico-chemical mechanisms involved in the acceleration of the hydration of calcium sulfoaluminate cement by lithium ions10.1016/j.cemconres.2017.03.004 ↗
24. Combined effects of lithium and borate ions on the hydration of calcium sulfoaluminate cement10.1016/j.cemconres.2017.03.006 ↗
25. Effects of amorphous AH3 phase on mechanical properties and hydration process of C4A3S‾-CH2-CH-H2O system10.1016/j.conbuildmat.2016.11.111 ↗
26. Sulfate resistance of calcium sulphoaluminate cement
27. Hydration stage identification and phase transformation of calcium sulfoaluminate cement at early age10.1016/j.conbuildmat.2014.11.006 ↗
28. S. L, B. P, Heats of dehydration and specific heats of compounds found in concrete and their potential for thermal energy storage, Solar Energy Mater., 14(1) (1986) 1–12.10.1016/0165-1633(86)90008-0 ↗
29. Influence of a thermal cycle at early age on the hydration of calcium sulphoaluminate cements with variable gypsum contents10.1016/j.cemconres.2010.10.001 ↗
30. Hydration evolution and compressive strength of calcium sulphoaluminate cement constantly cured over the temperature range of 0 to 80 °C10.1016/j.cemconres.2017.05.025 ↗
31. A reaction range for hydration of calcium sulfoaluminate with calcium sulfate and calcium hydroxide: theory and experimental validation10.1680/jadcr.16.00045 ↗
32. Effect of calcium sulfate source on the hydration of calcium sulfoaluminate eco-cement10.1016/j.cemconcomp.2014.08.003 ↗
33. Kinetics of calcium sulfoaluminate formation from tricalcium aluminate, calcium sulfate and calcium oxide10.1016/j.cemconres.2013.10.006 ↗
34. Properties of a ternary calcium sulfoaluminate-calcium sulfate-fly ash cement10.1016/j.cemconres.2013.09.015 ↗
35. Utilization of flue gas desulfurization gypsum for producing calcium sulfoaluminate cement10.1016/j.jclepro.2017.05.055 ↗
36. SEM-backscattered electron imaging and image processing for evaluation of unhydrated cement volume fraction in slag blended Portland cement pastes10.1007/s11595-013-0802-6 ↗
37. Effect of temperature on the hydration of ordinary Portland cement in the presence of a superplasticizer10.1016/0040-6031(94)80138-X ↗
38. Use of calcium sulfoaluminate cement to improve strength of mortars at low temperature
39. Hydration of ordinary Portland cement and calcium sulfoaluminate cement blends10.1016/j.cemconcomp.2014.11.005 ↗
40. Contribution of limestone to the hydration of calcium sulfoaluminate cement10.1016/j.cemconcomp.2015.07.005 ↗
41. A hydration study of various calcium sulfoaluminate cements10.1016/j.cemconcomp.2014.07.002 ↗
42. Hydration of calcium sulfoaluminate cements – experimental findings and thermodynamic modelling10.1016/j.cemconres.2009.08.014 ↗
43. Thermodynamic modelling of the effect of temperature on the hydration and porosity of Portland cement10.1016/j.cemconres.2007.08.017 ↗
44. Taylor · 1997
45. Direct synthesis and hydration of calcium aluminosulfate (Ca 4Al 6O 16S)10.1111/j.1151-2916.2002.tb00129.x ↗
46. Hydration of calcium aluminate cements: a solid-state 27Al NMR study10.1111/j.1151-2916.1993.tb03799.x ↗
47. Kinetics of hydration of monocaldum aluminate10.1111/j.1151-2916.1986.tb04748.x ↗
48. Microstructure of amorphous aluminum hydroxide in belite-calcium sulfoaluminate cement10.1016/j.cemconres.2015.01.013 ↗
49. Mineral surfaces and soil organic matter10.1046/j.1365-2389.2003.00544.x ↗
50. Micro-mechanical properties of calcium sulfoaluminate cement and the correlation with microstructures10.1016/j.cemconcomp.2017.02.005 ↗