journal article·2018-07

Characterization of EPS lightweight concrete microstructure by X-ray tomography with consideration of thermal variations

Maroua Maaroufi, Kamilia Abahri, Chady El Hachem, Rafik Belarbi

Publisher page

Abstract

Abstract The use of recycled polystyrene beads in cement-based materials is a solution to improve the insulation in buildings and reduce the energy consumption. This also helps limiting landfill by reusing the polystyrene waste. This paper presents a refined morphological and thermal characterization of a polystyrene-based mortar using X-ray micro-tomography where a dedicated X-ray scanning and volumetric processing protocol was developed. All the reconstructed volumes had a mean voxel size between 10 and 20 μm. In complementary procedure, the interactions between the different phases of the material have been investigated, by observing the interface using scanning electron microscopy (SEM). After a set of volumetric analysis, the obtained representative elementary volume (REV) was 10 × 10 × 10 mm3. The microstructure (porosity, pore diameter and interface, etc.) has been studied by 3D image analysis. The material’s response to thermal solicitations at a local scale has also been examined, by observing its microstructural variations under thermal loads using an optical microscope. The micro-tomographic results allow us to assess a representative elementary volume for the polystyrene mortar, to evaluate its total porosity using two different approaches, and to have access to the pore size distribution. The SEM images show a good adherence between the two phases of the material, and the microscopic tracing under thermal solicitations indicates possible alterations of the beads from a temperature of 100 °C, unlike the literature results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. International Energy Outlook 2017, US Energy Information Administration, 2017.
2. Static and dynamic mechanical properties of expanded polystyrene10.1016/j.matdes.2014.12.024 ↗
3. Expanded Polystyrene (EPS) geofoam: an introduction to material behavior10.1016/0266-1144(94)90048-5 ↗
4. Article R541-8 du Code de l’environnement, Annexe III de la directive 2008/98/CE du Parlement européen et du Conseil du 19 novembre 2008 relative aux déchets et abrogeant certaines directives.
5. Mechanical properties of polymer-modified concretes containing expanded polystyrene beads10.1016/j.conbuildmat.2005.08.001 ↗
6. Mechanical properties of expanded polystyrene lightweight aggregate concrete and brick10.1016/j.conbuildmat.2011.08.030 ↗
7. Properties of lightweight expanded polystyrene aggregate concretes containing fly ash10.1016/j.cemconres.2004.11.015 ↗
8. Properties of lightweight expanded polystyrene concrete reinforced with steel fiber10.1016/j.cemconres.2003.12.014 ↗
9. Effect of polystyrene aggregate size on strength and moisture migration characteristics of lightweight concrete10.1016/j.cemconcomp.2006.02.018 ↗
10. Mechanical properties of EPS lightweight concrete
11. Experimental study of lightweight expanded polystyrene aggregate concrete containing silica fume and polypropylene fibers10.1007/s12204-010-9550-3 ↗
12. Behaviour of lightweight expanded polystyrene concrete containing silica fume10.1016/S0008-8846(02)01055-4 ↗
13. Mechanical and drying shrinkage properties of structural-graded polystyrene aggregate concrete10.1016/j.cemconcomp.2008.01.002 ↗
14. Strength and durability assessment of self-compacted lightweight concrete containing expanded polystyrene10.1617/s11527-013-0210-6 ↗
15. Durability of expanded polystyrene mortars10.1016/j.conbuildmat.2013.04.029 ↗
16. Properties of lightweight concrete composed of magnesia phosphate cement and expanded polystyrene aggregates10.1617/s11527-013-0182-6 ↗
17. Mechanical and physical properties of expanded polystyrene structural concretes containing Micro-silica and Nano-silica10.1016/j.conbuildmat.2017.01.040 ↗
18. A comparative study on the thermal conductivities and mechanical properties of lightweight concretes10.1016/j.enbuild.2017.07.013 ↗
19. Thermal conductivity and shrinkage properties of modified waste polystyrene aggregate concretes10.1016/j.conbuildmat.2012.04.105 ↗
20. Performance of cement mortar made with recycled high impact polystyrene10.1016/j.cemconcomp.2012.06.014 ↗
21. Properties of concrete containing waste expanded polystyrene and natural resin10.1016/j.conbuildmat.2015.12.177 ↗
22. Thermal and mechanical properties of gypsum plaster mixed with expanded polystyrene and tragacanth10.1016/j.tsep.2017.02.008 ↗
23. Characterization and simulation of microstructure and properties of EPS lightweight concrete10.1016/j.cemconres.2007.08.028 ↗
24. Microstructural examination and potential application of rendering mortars made of tire rubber and expanded polystyrene wastes10.1016/j.conbuildmat.2015.07.086 ↗
25. The effect of foam polystyrene granules on cement composite properties10.1016/j.cemconcomp.2003.09.004 ↗
26. Structural feasibility of Expanded Polystyrene (EPS) based lightweight concrete sandwich wall panels10.1016/j.conbuildmat.2017.02.027 ↗
27. Bear · 1972
28. Computed tomography to estimate the representative elementary area for soil porosity measurements
29. Three-dimensional image correlation from X-ray computed tomography of solid foam10.1016/j.compositesa.2007.11.011 ↗
30. Avizo User’s Guide, English, FEI Visualization Sciences Group.
31. A review on image segmentation techniques10.1016/0031-3203(93)90135-J ↗
32. Survey over image thresholding techniques and quantitative performance evaluation10.1117/1.1631315 ↗
33. Microstructure and transport properties of cellular materials: representative volume element10.1002/adem.200900131 ↗
34. Design of bespoke lightweight cement mortars containing waste expanded polystyrene by experimental statistical methods10.1016/j.matdes.2015.10.044 ↗
35. Micro- and nano-X-ray computed-tomography: a step forward in the characterization of the pore network of a leached cement paste10.1016/j.cemconres.2014.08.007 ↗
36. X-ray computed tomography for pore-related characterization and simulation of cement mortar matrix10.1016/j.ndteint.2016.11.005 ↗