journal article·2018-07

Experimental and numerical study of thermal performance of the PCM wall with solar radiation

Jingchao Xie, Wei Wang, Pengfei Sang, Jiaping Liu

Publisher page

Abstract

Abstract The phase change material (PCM) layer used for energy storage of the wall in winter can absorb a mass of heat from the solar radiation in daylight and release the heat at night, thus reduce the air-conditioning energy consumption and maintain the indoor air temperature. To study thermal performance of the PCM wall and optimize the application of PCMs, a thermal performance testing equipment was designed and the case that solar light suddenly irradiated the PCM layer in daylight and disappeared at night in an air-conditioning room was experimental and numerical simulated. Results show that PCM layers can change the absorptivity of the wall, and then improve surface temperature and heat flux in heat storage process. The addition of the PCM to the wall can enhance the heat storage in the wall. Besides, the wall surface temperature in heat release process was improved. To make the heat released constantly in a long time at night, the PCM with proper phase change temperature, narrow phase change range and large latent heat should be chosen. The effect of the specific heat capacity and the heat conductivity is unobvious. Using the proper PCM, heat release time can be 10.3 h. It is unnecessary to make the radiation time too long. Two hours radiation time is enough for the PCM used in the experiment to store the solar heat.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Building Energy and Comfort Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Thermal performance analysis of PCM components heat storage using mechanical ventilation: experimental results10.1016/j.enbuild.2016.04.043 ↗
2. Review on thermal energy storage with phase change materials (PCMs) in building applications10.1016/j.apenergy.2011.08.025 ↗
3. Investigation of the thermal performance of a passive solar test-room with wall latent heat storage10.1016/S0360-1323(97)00009-7 ↗
4. An assessment of mixed type PCM-gypsum and shape-stabilized PCM plates in a building for passive solar heating10.1016/j.solener.2007.01.014 ↗
5. A new kind of phase change material (PCM) for energy-storing wallboard10.1016/j.enbuild.2007.07.002 ↗
6. Simulation of phase change drywalls in a passive solar building10.1016/j.applthermaleng.2005.10.007 ↗
7. Experimental assessment of a phase change material for wall building use10.1016/j.apenergy.2009.01.004 ↗
8. Study on functional and mechanical properties of cement mortar with graphite-modified microencapsulated phase-change materials10.1016/j.enbuild.2015.07.043 ↗
9. Thermal analysis of a direct-gain room with shape-stabilized PCM plates10.1016/j.renene.2007.06.024 ↗
10. Modeling and simulation of under-floor electric heating system with shape-stabilized PCM plates10.1016/j.buildenv.2004.04.005 ↗
11. Ultrathin envelope thermal performance improvement of prefab house by integrating with phase change material10.1016/j.enbuild.2013.08.029 ↗
12. Energetic efficiency of room wall containing PCM wallboard: a full-scale experimental investigation10.1016/j.enbuild.2007.01.022 ↗
13. Experimental investigation of wallboard containing phase change material: data for validation of numerical modeling10.1016/j.enbuild.2008.11.022 ↗
14. Thermal testing and numerical simulation of gypsum wallboards incorporated with different PCMs content10.1016/j.apenergy.2010.08.014 ↗