Microstructural evolution of aluminum hydroxide gel during the hydration of calcium sulfoaluminate under different alkali concentrations
Source abstract
Abstract
Abstract The present paper discusses the microstructural evolution of aluminum hydroxide (AH3) formed during the hydration of calcium sulfoaluminate in neutral and alkaline solutions (0-M NaOH, 0.01-M NaOH, 0.1-M NaOH, 1-M NaOH, 5-M NaOH and 8-M NaOH). Rietveld method and field emission scanning electron microscopy measurements were used to observe the evolution of crystallite size and particle size distribution, respectively. Furthermore, various characterization methods were used to complement the microstructure of AH3 phase. The result of 27Al MAS-NMR spectroscopy indicated the absence of the amorphous AH3 phase in all hydrated pastes. The degree of crystallinity, with respect to the AH3 phase, improved with increasing alkali concentration. However, AH3 phase can also react with OH− ion and even disappear in high alkaline conditions. In low alkaline conditions (i.e., 0-M NaOH, 0.01-M NaOH, 0.1-M NaOH), the AH3 phase had a nanocrystalline structure with an average crystallite size of about 8–9 nm and particle size distribution ranging from 110 nm to 210 nm. In high alkaline conditions (i.e., 5-M NaOH and 8-M NaOH), the AH3 phase presented a well-crystalline nature. The average crystallite size increased up to about 30–40 nm and the particle size distribution was mostly 800–1400 nm (5-M NaOH) or 1000–1500 nm (8-M NaOH).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Layered Double Hydroxides Synthesis and Applications · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Direct synthesis and hydration of calcium aluminosulfate (Ca4Al6O16S)10.1111/j.1151-2916.2002.tb00129.x ↗
2. Studies on the early hydration of two modifications of ye'elimite with gypsum10.1016/j.cemconres.2016.11.009 ↗
3. Expansion mechanisms in calcium aluminate and sulfoaluminate systems with calcium sulfate10.1016/j.cemconres.2013.11.011 ↗
4. Structure, atomistic Simulations, and phase transition of stoichiometric ye'elimite10.1021/cm400129z ↗
5. Hydration stage identification and phase transformation of calcium sulfoaluminate cement at early age10.1016/j.conbuildmat.2014.11.006 ↗
6. Hydration mechanisms of two polymorphs of synthetic ye'elimite10.1016/j.cemconres.2014.05.010 ↗
7. Hydration of calcium sulfoaluminate cement at less than 24 h10.1680/adcr.2002.14.4.141 ↗
8. Hydration of calcium sulphoaluminate clinker with additions of different calcium sulphate sources10.1617/s11527-014-0510-5 ↗
9. Advances in alternative cementitious binders10.1016/j.cemconres.2010.11.012 ↗
10. Physico-chemical mechanisms involved in the acceleration of the hydration of calcium sulfoaluminate cement by lithium ions10.1016/j.cemconres.2017.03.004 ↗
11. Hydration products in sulfoaluminate cements: evaluation of amorphous phases by XRD/solid-state NMR10.1016/j.cemconres.2016.05.014 ↗
12. Influence of fly ash on the hydration of calcium sulfoaluminate cement10.1016/j.cemconres.2017.02.030 ↗
13. Calcium sulfoaluminate cements-low-energy cements, special cements or what?10.1680/adcr.1999.11.1.3 ↗
14. High-performance cement matrices based on calcium sulfoaluminate–belite compositions10.1016/S0008-8846(01)00649-4 ↗
15. Microstructure of amorphous aluminum hydroxide in belite-calcium sulfoaluminate cement10.1016/j.cemconres.2015.01.013 ↗
16. Phase equilibria in the system Ca4Al6O12SO4-Ca2SiO4-CaSO4-H2O referring to the hydration of calcium sulfoaluminate cements10.21809/rilemtechlett.2016.5 ↗
17. Stability in the system CaO-Al2O3-H2O10.1016/j.cemconres.2012.09.002 ↗
18. Hydration of calcium aluminate cement blended with anhydrite10.1680/jadcr.17.00045 ↗
19. Aluminum hydroxide gel characterization within a calcium aluminate cement paste by combined Pair Distribution Function and Rietveld analyses10.1016/j.cemconres.2017.02.025 ↗
20. Hydration of quaternary phase-gypsum system10.1016/j.conbuildmat.2017.06.179 ↗
21. Influences of pH value on the microstructure and phase transformation of aluminum hydroxide10.1016/j.powtec.2008.11.008 ↗
22. Solid-state 1H and 27Al NMR studies of amorphous aluminum hydroxides10.1016/S0021-9797(03)00144-9 ↗
23. Evolution of aluminum hydroxides in diluted aqueous aluminum nitride powder suspensions10.1021/cg201349s ↗
24. Influence of sodium borate on the early age hydration of calcium sulfoaluminate cement10.1016/j.cemconres.2014.12.010 ↗
25. C4A3Š hydration in different alkaline media10.1016/j.cemconres.2013.01.008 ↗
26. Influence of calcium sulfoaluminate (CSA) cement content on expansion and hydration behavior of various ordinary Portland cement-CSA blends10.1111/jace.13645 ↗
27. Hydration of Portland cement with additions of calcium sulfoaluminates10.1016/j.cemconres.2012.10.011 ↗
28. Influence of the calcium sulphate source on the hydration mechanism of Portland cement-calcium sulphoaluminate clinker-calcium sulphate binders10.1016/j.cemconcomp.2011.03.005 ↗
29. C4A3Š hydration, ettringite formation, and its expansion mechanism: III. Effect of CaO, NaOH and NaCl; conclusions10.1016/0008-8846(82)90011-4 ↗
30. Calorimetric and thermogravimetric study on the influence of calcium sulfate on the hydration of ye'elimite10.1007/s10973-009-0582-6 ↗
31. Studies of early stages of paste hydration of cement compounds, II10.1111/j.1151-2916.1963.tb11713.x ↗
32. Effect of sodium silicate on calcium aluminate cement hydration in highly alkaline media: a microstructural characterization10.1111/j.1551-2916.2010.04242.x ↗
33. Yuan · 1996
34. Early age hydration of calcium sulfoaluminate (synthetic ye’elimite) in the presence of gypsum and varying amounts of calcium hydroxide10.1016/j.cemconres.2013.03.001 ↗
35. Micro-mechanical properties of calcium sulfoaluminate cement and the correlation with microstructures10.1016/j.cemconcomp.2017.02.005 ↗
36. Effects of amorphous AH3 phase on mechanical properties and hydration process of C4A3S̅-CS̅H2-CH-H2O system10.1016/j.conbuildmat.2016.11.111 ↗
37. Comparison of methods for arresting hydration of cement10.1016/j.cemconres.2011.06.003 ↗
38. Physico-chemical interaction between mineral admixtures and OPC-calcium sulfoaluminate (CSA) cements and its influence on early-age expansion10.1016/j.cemconres.2015.11.003 ↗
39. Rietveld refinement guidelines10.1107/S0021889898009856 ↗
40. Rietveld quantitative phase analysis of Yeelimite-containing cements10.1016/j.cemconres.2012.03.018 ↗
41. Yang · 1990
42. IsGISAXS: a program for grazing-incidence small-angle X-ray scattering analysis of supported islands10.1107/S0021889802006088 ↗
43. Characterization of calcium aluminate phases in cements by aluminum-27 MAS NMR spectroscopy10.1021/ic00058a043 ↗
44. Hydrogen bonds and local symmetry in the crystal structure of gibbsite10.1002/mrc.2682 ↗
45. Structure of calcium aluminate sulfate Ca4Al6O16S10.1016/0022-4596(95)80002-7 ↗
46. A new aluminium-hydrate species in hydrated Portland cements characterized by 27Al and 29Si MAS NMR spectroscopy10.1016/j.cemconres.2005.04.010 ↗
47. Refinement of the hybrid layer structure [Ca2Al(OH)6]+·[1/2SO4·3H2O]
48. In-situ early-age hydration study of sulfobelite cements by synchrotron powder diffraction10.1016/j.cemconres.2013.10.009 ↗
49. The Scherrer formula for X-Ray particle size determination10.1103/PhysRev.56.978 ↗
50. The Scherrer equation and the dynamical theory of X-ray diffraction
51. Mechanochemical phenomena of gibbsite, bayerite and boehmite by grinding10.1016/0168-7336(89)80037-3 ↗
52. Scherrer after sixty years: a survey and some new results in the determination of crystallite size10.1107/S0021889878012844 ↗