journal article·2018-12Open access

A numerical model including thermodynamic equilibrium, kinetic control and surface complexation in order to explain cation type effect on chloride binding capability of concrete

Van Quan Tran, Anthony Soive, Stéphanie Bonnet, Abdelhafid Khelidj

Abstract

The impact of cation type, sulphate and pH on chloride binding is studied using a numerical model combining thermodynamic equilibrium, kinetics and surface complexation. First, the model is validated by comparing numerical and experimental results obtained on a CEM II concrete material exposed to N aCl, KCl, M gCl 2 and CaCl 2 solutions. Then, the numerical results are discussed to improve our understanding of the differences in chloride binding capability generally observed in the literature. A strong coupling between cation, pH and sulfate affecting chloride binding is highlighted. After six months of exposure, chloride binding due to Kuzel's salt formation has little effect on chloride binding capability whatever the chloride salt solution. The results also confirm the existence of a relationship between pH and chloride binding capability previously observed experimentally in the literature. When some sulfate ions are present in the chloride solution, they reduce the chloride binding capability because of the sulfate absorption process on C-S-H.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. American Society for Testing and Material, ASTM C-1152, Standard test method for acid-soluble chloride in mortar and concrete.
2. Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar10.1016/S0008-8846(00)00265-9 ↗
3. Steel corrosion in concrete. How does it occur?
4. Corrosion and corrosion inhibition of reinforcing steel. I. Immersed in alkaline solutions10.1179/000705970798324450 ↗
5. fib, Materials, Wiley-VCH Verlag GmbH & Co. KGaA, 2013, pp. 74–150.
6. Investigations of reinforcement corrosion. 1. The pore electrolyte phase in chloride-contaminated concrete10.1007/BF02472078 ↗
7. Chloride binding in cement ii. The influence of the hydroxide concentration in the pore solution of hardened cement paste on chloride binding10.1016/0008-8846(89)90039-2 ↗
8. S. P, L.J (Eds.), Symposium proceedings of Nordic miniseminar on chloride penetration into concrete structures, no. 93, Chalmers University of Technology, Division of Building Materials, 1993.
9. Effect of calcium chloride on the durability of pre-tensioned wire in prestressed concrete10.1680/macr.1962.14.42.143 ↗
10. Effect of chloride salt type on chloride binding behavior of concrete10.1016/j.conbuildmat.2012.07.079 ↗
11. Factors influencing chloride-binding in concrete10.1016/0008-8846(90)90083-A ↗
12. Chloride binding capacity of various hydrated cement paste systems10.1016/S1065-7355(97)90003-1 ↗
13. The impact of sulphate and magnesium on chloride binding in portland cement paste10.1016/j.cemconres.2014.07.007 ↗
14. Influence of cation type on diffusion behavior of chloride ions in concrete10.1016/j.conbuildmat.2015.09.033 ↗
15. O. Wowra, M. Setzer, Sorption of chlorides on hydrated cements and c3s pastes, in: M. Setzer, R. Auberg (Eds.), Frost Resistance of Concrete, 1997, pp. 146–153.
16. Chloride binding of cement-based materials subjected to external chloride environment-a review10.1016/j.conbuildmat.2008.02.004 ↗
17. B.K., Chloride binding in cement paste, Nordic Concr. Res. 5 (1986) 27–38.
18. Modeling ion and fluid transport in unsaturated cement systems in isothermal conditions10.1016/j.cemconres.2004.07.016 ↗
19. Modelling of isothermal coupled moisture-ion transport in cementitious materials10.1016/j.cemconres.2011.04.001 ↗
20. Study of electrical double layer effect on chloride transport in unsaturated concrete10.1016/j.conbuildmat.2013.09.013 ↗
21. Modeling the effect of temperature on ionic transport in cementitious materials10.1016/j.cemconres.2006.11.008 ↗
22. External sulfate attack of cementitious materials: new insights gained through numerical modeling including dissolution/precipitation kinetics and surface complexation10.1016/j.cemconcomp.2017.07.024 ↗
23. Modelisation of chloride reactive transport in concrete including thermodynamic equilibrium, kinetic control and surface complexation10.1016/j.cemconres.2018.05.007 ↗
24. T. Xu, N. Spycher, E. Sonnenthal, TOUGHREACT User’s Guide: A Simulation Program for Non-isothermal Multiphase Reactive Transport in Variably Saturated Geologic Media, version 2.0 (Tech. Rep.), Lawrence Berkeley National Laboratory, 2012.
25. Reactive transport codes for subsurface environmental simulation10.1007/s10596-014-9443-x ↗
26. Gem-selektor geochemical modeling package: revised algorithm and gems3k numerical kernel for coupled simulation codes
27. H.C. Helgeson, D.H. Kirkham, G.C. Flowers, Theoretical Prediction of the Thermodynamic Behavior of Aqueous Electrolytes by High Pres-sures and Temperatures, IV; Calculation of Activity Coefficients, Os-motic Coefficients, and Apparent Molal and Standard Relative Partial Molal Properties to 600 Degree, 1981.10.2475/ajs.281.10.1249 ↗
28. Modeling the degradation of portland cement pastes by biogenic organic acids10.1016/j.cemconres.2010.03.005 ↗
29. Impact of a 70°C temperature on an ordinary portland cement paste/claystone interface: an in situ experiment10.1016/j.cemconres.2016.02.001 ↗
30. Requirements and possible simplifications for multi-ionic transport models – case of concrete subjected to wetting-drying cycles in marine environment10.1016/j.conbuildmat.2018.01.015 ↗
31. Chemical weathering rate laws and global geochemical cycles10.1016/0016-7037(94)90016-7 ↗
32. Dissolution-precipitation behaviour of ettringite, monosulfate, and calcium silicate hydrate10.1016/j.cemconres.2003.08.016 ↗
33. Kinetics of dolomite-portlandite reaction: application to portland cement concrete10.1016/S0008-8846(01)00499-9 ↗
34. Geochemical evaluation of {CO2} injection and containment in a depleted gas field10.1016/j.ijggc.2014.10.005 ↗
35. Palandri · 2004
36. Uptake of chloride and carbonate ions by calcium monosulfoaluminate hydrate10.1016/j.cemconres.2012.05.012 ↗
37. Zeta-potential study of calcium silicate hydrates interacting with alkaline cations10.1006/jcis.2001.7897 ↗
38. Molecular dynamics modeling of chloride binding to the surfaces of calcium hydroxide, hydrated calcium aluminate, and calcium silicate phases10.1021/cm0107070 ↗
39. Electrokinetic potential of hydrated cement in relation to adsorption of chlorides10.1016/j.cemconres.2009.01.006 ↗
40. Ion-cement hydrate interactions govern multi-ionic transport model for cementitious materials10.1016/j.cemconres.2010.08.019 ↗
41. D.A. Dzombak, F.M. Morel, Surface complexation modelling: hydrous ferric oxide, A Wiley-Interscience Publication.
42. The crystal structure of the 11 a natural tobermorite ca2.25[si3o7.5(oh)1.5].1h2o
43. C-s-h/solution interface: experimental and monte carlo studies10.1016/j.cemconres.2010.10.002 ↗
44. Y. Hosokawa, K. Yamada, B. Johannesson, L. Nilsson, Reproduction of chloride ion bindings in hardened cement paste using thermodynamic equilibrium models, in: 2nd International Symposium on Advances in Concrete Through Science and Engineering, 2006.10.1617/2351580028.025 ↗
45. Predicting the long term durability of concrete engineered barriers in a geological repository for radioactive waste10.1016/j.pce.2006.02.049 ↗
46. Tran · 2016
47. Development of low ph cement systems forming magnesium silicate hydrate (m-s-h)10.1016/j.cemconres.2011.01.016 ↗
48. Magnesium and calcium silicate hydrates10.1016/j.cemconres.2015.06.007 ↗
49. Elemental zonation in marine concrete10.1016/j.cemconres.2016.02.006 ↗