Effect of specimen size on dynamic compressive properties of fiber-reinforced reactive powder concrete at high strain rates
Source abstract
Abstract
Abstract This study presents an experimental study of similar reactive powder concrete (RPC) cylinders with different sizes subjected to axial impact loading. Dynamic compressive experiments were conducted on two dimensional RPC specimens using split Hopkinson pressure bar device. 54 hybrid fiber-reinforced RPC samples with 2% steel fiber and 0.2% polypropylene (PP) fibers contents by volume were characterized at strain rates from 107 to 356 s−1. Results from this and previous studies are analyzed to comprehensively investigate the effect of RPC specimen size on dynamic compressive performance. A series of quantitative analyses examining the relationship between dynamic properties and specimen size, strain rate, and steel fiber were conducted. Dynamic increase factor (DIF) of RPC compressive strength for specimens with larger diameters was consistently greater than RPC specimens with smaller diameters when the length to diameter ratio (l/d) was constant. RPC specimen size exhibited no visible effect on the critical strain DIF. Critical strain DIF increased with increasing strain rate and decreasing steel fiber addition. Critical damage variables of RPC specimens of greater size were higher than that of smaller sizes. Under identical strain rates, RPC specimen size had no visible effect on the DIF of Young's modulus or energy absorption.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Innovative concrete reinforcement materials · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Development of novel ultra-high performance concrete: From material to structure[J]10.1016/j.conbuildmat.2016.12.175 ↗
2. Comparative shrinkage behavior of ultra-high-performance fiber-reinforced concrete under ambient and heat curing conditions10.1016/j.conbuildmat.2017.12.029 ↗
3. Temperature and stress development in ultra-high performance concrete during curing10.1016/j.conbuildmat.2016.06.052 ↗
4. X. Hou S. Cao W. Zheng Analysis on the dynamic response of steel-RPC anti-explosion doors under blast load. J. Build. Struct., 2016, 37(Suppl. 1):pp. 219-226+232. (in Chinese)
5. Dynamic splitting tensile test of hybrid-fiber-reinforced reactive powder concrete10.1680/jemmr.16.00070 ↗
6. Effects of steel fibres on dynamic strength of UHPC10.1016/j.conbuildmat.2016.04.007 ↗
7. High temperature and residual properties of reactive powder concrete – A review10.1016/j.conbuildmat.2017.04.083 ↗
8. A P-I diagram approach for predicting failure modes of RPC one-way slabs subjected to blast loading10.1016/j.ijimpeng.2018.06.006 ↗
9. Dynamic mechanical behavior of steel-fiber reactive powder concrete
10. Dynamic compression behavior of ultra-high performance cement based composites10.1016/j.ijimpeng.2009.11.005 ↗
11. Experimental and numerical studies on dynamic compressive behavior of reactive powder concretes10.1007/s10338-008-0851-0 ↗
12. Experimental study of dynamic mechanical properties of reactive powder concrete under high-strain-rate impacts10.1007/s11431-010-4061-x ↗
13. Single and multiple dynamic impacts behaviour of ultra-high performance cementitious composite10.1007/s11595-011-0395-x ↗
14. Impact resistance of reactive powder concrete10.1007/s11595-015-1223-5 ↗
15. Dynamic behavior of reactive powder concrete in split Hopkinson pressure bar testing
16. Dynamic behavior of reactive powder concrete in split Hopkinson pressure bar testing
17. Uniaxial compression tests at various loading rates for reactive powder concrete10.1016/j.tafmec.2009.06.001 ↗
18. Study on dynamic mechanical behavior and constitutive model of reactive powder concrete after exposure in high temperature
19. Experimental investigation on dynamic mechanical performances of reactive powder concrete
20. Effects of steel fiber and strain rate on the dynamic compressive stress-strain relationship in reactive powder concrete10.1016/j.conbuildmat.2018.03.101 ↗
21. Experimental study on dynamic compressive properties of fiber-reinforced reactive powder concrete at high strain rates10.1016/j.engstruct.2018.05.036 ↗
22. Size effect for normal strength concrete cylinders subjected to axial impact10.1016/j.ijimpeng.2004.01.003 ↗
23. Size effect for high-strength concrete cylinders subjected to axial impact10.1016/S0734-743X(02)00166-5 ↗
24. Experimental confirmation of some factors influencing dynamic concrete compressive strengths in high-speed impact tests10.1016/j.cemconres.2013.05.008 ↗
25. Influence of end friction confinement on impact tests of concrete material at high strain rate10.1016/j.ijimpeng.2013.04.008 ↗
26. Numerical evaluation of the influence of aggregates on concrete compressive strength at high strain rate10.1260/2041-4196.2.2.177 ↗
27. Effect of cylinder size on the modulus of elasticity and compressive strength of concrete from static and dynamic tests
28. Quek. Effect of specimen size on static strength and dynamic increase factor of high-strength concrete from SHPB test10.1520/JTE103370 ↗
29. CEB, Concrete structures under impact and impulsive loading, Synthesis Report, Bulletin d’Information No.187 (Comite Euro-International du Beton Lausanne, 1988).
30. Microstructure and mechanical properties of RPC containing PP fibres at elevated temperatures10.1680/macr.13.00232 ↗
31. Compressive and tensile properties of reactive powder concrete with hybrid fibres at elevated temperatures
32. Chinese Standard. GB/T 31387-2015. Reactive Powder Concrete. 2015. (in Chinese)
33. Correlation between the accuracy of a SHPB test and the stress uniformity based on numerical experiments10.1016/S0734-743X(02)00073-8 ↗
34. Investigation of the mechanical properties of materials at very high rates of loading
35. A Method of measuring the pressure produced in the detonation of high explosives or by the impact of bullets
36. A critical study of the Hopkinson pressure bar10.1098/rsta.1948.0001 ↗
37. Hopkinson bar experiments as a method to determine impact properties of brittle and ductile materials
38. Fracture studies of ultra-high performance concrete using dynamic Brazilian tests10.1016/j.tafmec.2017.10.001 ↗
39. On the tensile resistance of UHPC at impact10.1140/epjst/e2018-00057-1 ↗
40. D. Cronin, C. Salisbury, C. Horst. High rate characterization of low impedance materials using a polymeric split Hopkinson pressure bar. in: Proceedings of the 2006 Society for Experimental Mechanics (SEM) Annual Conference and Exposition on Experimental and Applied Mechanics, 2006.
41. Chen · 2005
42. Wang · 2011
43. Quantification of dynamic tensile behavior of cement-based materials10.1016/j.conbuildmat.2013.10.039 ↗
44. Experimental study on split hopkinson pressure bar pulse-shaping techniques for concrete
45. Compressive strength of concrete cores under high strain rates10.1061/(ASCE)CF.1943-5509.0000586 ↗
46. The dynamic compression testing of solids by the method of the split Hopkinson pressure bar10.1016/0022-5096(63)90050-4 ↗
47. Further investigation on the dynamic compressive strength enhancement of concrete-like materials based on split Hopkinson pressure bar tests. Part I: experiments10.1016/j.ijimpeng.2009.04.009 ↗
48. Further investigation on the dynamic compressive strength enhancement of concrete-like materials based on split Hopkinson pressure bar tests. Part II: numerical simulations10.1016/j.ijimpeng.2009.04.010 ↗
49. About the dynamic strength enhancement of concrete-like materials in a split Hopkinson pressure bar test10.1016/S0020-7683(02)00526-7 ↗
50. An improved method for compressive stress-strain measurements at very high strain rates
51. Stress-strain behavior and statistical continuous damage model of cement mortar under high strain rates10.1061/(ASCE)MT.1943-5533.0000570 ↗
52. Effect of straining rate on the compressive strength and elastic properties of concrete
53. Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete10.1016/j.conbuildmat.2013.05.063 ↗
54. A model for deformation and fragmentation in crushable brittle solids10.1016/j.ijimpeng.2007.02.002 ↗
55. Stress–strain relationship of steel fiber-reinforced concrete under dynamic compression10.1016/j.conbuildmat.2007.01.005 ↗
56. A tensile damage model for rocks: Application to blast induced damage assessment10.1016/j.compgeo.2010.10.009 ↗
57. Enhancement of energy absorption in a closed-cell aluminum by the modification of cellular structures10.1016/S1359-6462(99)00255-9 ↗