Effects of coarse aggregate volume on CFRP-concrete bond strength and behavior
Source abstract
Abstract
Abstract A major challenge in using fiber reinforced polymer (FRP) composites for repair and strengthening of concrete structures has been debonding of FRP from concrete substrate. It is, therefore, essential to identify the parameters involved in FRP-concrete bond behavior to predict the loading capacity of the bond and, thereby, possibly postpone the debonding of the strengthening sheet. One such important parameter is the coarse aggregate at the interface between the substrate concrete and the FRP sheet which becomes exposed after surface preparation of the concrete for adhering FRP sheets; the coarse aggregate might affect FRP-concrete bond behavior and strength. The present study was designed and implemented to investigate the effects of coarse aggregate volume on FRP-concrete bond strength and behavior. To achieve this objective, 52 concrete specimens were cast and strengthened with carbon FRP (CFRP) sheets 200 mm long and 50 mm wide using the externally-bonded reinforcement (EBR) technique. To better understand the effect of coarse aggregate, a parameter called “fine fraction” was defined as the ratio of fine aggregate to total concrete aggregate, with values in the range of zero to 1.0; zero for concrete mixes containing only coarse aggregate and 1.0 for those with only fine aggregate. The specimens thus prepared were then subjected to direct single lap-shear test. Particle image velocimetry (PIV) technique was also utilized to determine the displacement fields. The single lap-shear test results revealed that variations in fine fraction led to changes in bond strength such that fine fraction values of 0.3–0.6 led to reduced bond strength while those from 0.6 to 1.0 increased it. Comparison of experimental results obtained from the current study and those predicted by codes indicated the underestimation of bond strength by the codes in the absence of such surface parameters as fine fraction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Externally bonded reinforcement in grooves (EBRIG) technique to postpone debonding of FRP sheets in strengthened concrete beams10.1016/j.conbuildmat.2012.09.030 ↗
2. Nanni · 2009
3. J.F. Bonacci, Strength failure mode and deformability of concrete beams strengthened externally with advanced composites, in: Proc, 2th Int Symp On Advanced Composite Materials in Bridges and Structures, ACMBS-ll, Montreal, 1996, pp. 419–426.
4. ACI 440, Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-08), American Concrete Institute, Farmington Hills, Mich., 2008.
5. fib Bulletin 14, Externally bonded FRP reinforcement for RC structures, International Federation for Structural Concrete (fib), Lausanne, Switzerland, 2001.
6. HB 305-2008, Design Handbook for RC Structures Retrofitted with FRP and Metal Plates: Beams and Slabs, Standards Australia, 2008.
7. CNR-DT200, Guide for the design and construction of externally bonded FRP systems for strengthening of existing structures, National Research Council (CNR), Rome, Italy, 2004.
8. Grooving as alternative method of surface preparation to postpone debonding of FRP laminates in concrete beams10.1061/(ASCE)CC.1943-5614.0000117 ↗
9. Experimental study on the effectiveness of EBROG method for flexural strengthening of RC beams
10. Experimental study on effect of EBR and EBROG methods on debonding of FRP sheets used for shear strengthening of RC beams10.1016/j.compositesb.2012.09.081 ↗
11. Experimental investigation into bond behavior of CFRP sheets attached to concrete using EBR and EBROG techniques10.1016/j.compositesb.2013.03.003 ↗
12. Effect of groove characteristics on CFRP-to-concrete bond behavior of EBROG joints: experimental study using particle image velocimetry (PIV)10.1016/j.conbuildmat.2013.08.036 ↗
13. Experimental investigation into bond behavior of FRP-to-concrete under mixed-mode I/II loading10.1016/j.conbuildmat.2016.11.057 ↗
14. Experimental and analytical study on CFRP strips-to-concrete bonded joints using EBROG method10.1016/j.compositesb.2018.09.046 ↗
15. Investigating the effects of concrete compressive strength, CFRP thickness and groove depth on CFRP-concrete bond strength of EBROG joints10.1016/j.conbuildmat.2018.08.203 ↗
16. Anchorage strength models for FRP and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
17. FRP-to-concrete interface debonding: experimental calibration of a capacity model10.1016/j.compositesb.2011.04.016 ↗
18. Plate–concrete interfacial bond strength of FRP and metallic plated concrete specimen10.1016/j.compositesb.2005.05.011 ↗
19. A new single-shear set-up for stable debonding of FRP–concrete joints10.1016/j.conbuildmat.2008.04.003 ↗
20. Experimental study on FRP-to-concrete bonded joints10.1016/j.compositesb.2004.06.001 ↗
21. On shear bond strength of FRP-concrete structures10.1016/j.engstruct.2009.12.017 ↗
22. Modelling of CFRP-concrete shear-lap tests10.1016/j.conbuildmat.2006.06.012 ↗
23. Experimental studies on bond behavior of high strength CFRP plates10.1016/j.compositesb.2007.09.002 ↗
24. Experimental study on CFRP-to steel bonded interfaces10.1016/j.compositesb.2012.01.024 ↗
25. Bond strength and effective bond length of FRP sheets/plates bonded to concrete considering the type of adhesive layer10.1016/j.compositesb.2013.10.075 ↗
26. A study on bond mechanism of carbon fiber sheet
27. B. Miller, N. Nanni, Bond between CFRP sheets and concrete, in: Proc, ASCE 5th Materials Congress, Cincinnati, 1999, pp. 240–247.
28. Transfer lengths and bond strengths for composites bonded to concrete10.1061/(ASCE)1090-0268(1999)3:4(153) ↗
29. Bond and force transfer of composite material plates bonded to concrete
30. Bond behavior of CFRP sheets attached to concrete through EBR and EBROG joints subject to mixed-mode I/II loading10.1061/(ASCE)CC.1943-5614.0000816 ↗
31. Influence of the properties of externally bonded CFRP on the shear behavior of concrete/composite adhesive joints10.1016/j.compositesb.2010.03.007 ↗
32. ACI (American Concrete Institute), Standard practice for selecting proportions for normal, Heavyweight, and Mass Concrete (ACI 211.1-91), Farmington Hills, MI, 2002.
33. ASTM C33-03, Standard Specification for Concrete Aggregates, West Conshohocken, PA, 2003.
34. ASTM C192/C192M-02, Standard practice for making and curing concrete test specimens in the laboratory, West Conshohocken, PA, 2002.
35. Experimental investigation and fracture analysis of debonding between concrete and FRP sheets10.1061/(ASCE)0733-9399(2006)132:9(914) ↗
36. Shear capacity of FRP-strengthened RC beams: FRP debonding10.1016/S0950-0618(02)00091-0 ↗
37. An improved damage modelling to deal with the variability of fracture mechanisms in FRP reinforced concrete structures10.1016/j.ijadhadh.2013.03.009 ↗
38. ASTM D3039/D3039M, Standard Test Method for Tensile Properties of Polymer Matrix Composites Materials, West Conshohocken, PA, 2000.
39. Particle-imaging techniques for experimental fluid mechanics10.1146/annurev.fl.23.010191.001401 ↗
40. Displacement and strain field measurement in steel and RC beams using particle image velocimetry10.1061/(ASCE)EM.1943-7889.0000805 ↗
41. Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry10.1680/geot.2003.53.7.619 ↗
42. Soil deformation pattern around laterally loaded piles10.1680/ijpmg.2011.11.3.116 ↗
43. Generic debonding resistance of EBR and NSM plate-to-concrete joints10.1061/(ASCE)1090-0268(2007)11:1(62) ↗
44. Width effect in the interface fracture during shear debonding of FRP sheets from concrete10.1016/j.engfracmech.2006.09.002 ↗