journal article·2019-03

Influence of angularity and roughness of coarse aggregates on asphalt mixture performance

Dongliang Kuang, Xueting Wang, Yuan Jiao, Ben Zhang, Yanjin Liu, Huaxin Chen

Publisher page

Abstract

Abstract The damage of asphalt mixture occurs in asphalt-aggregate interphase. The strength was directly associated with the overall performance of mixture. In this paper, Marshall test was applied to investigate the high-temperature stability. The high-temperature stability, water stability and low-temperature performance of five types of asphalt mixtures were tested through Marshall test, and the correlation between road performance dynamic stability, freeze-thaw split strength ratio, and low-temperature flexural tensile strength and average angular coefficient of coarse aggregate was studied. Moreover, the correlations of asphalt-aggregate interphase strength to the pavement performance index of asphalt mixture were also established.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumen10.1016/j.conbuildmat.2008.05.004 ↗
2. Preparation of a novel flow improver and its viscosity-reducing effect on bitumen10.1016/j.fuel.2016.05.028 ↗
3. Verification and modeling of three-stage permanent deformation behavior of asphalt mixes10.1061/(ASCE)0733-947X(2004)130:4(486) ↗
4. Liner viscoelastic analysis of asphalt mastics10.1061/(ASCE)0899-1561(2004)16:2(122) ↗
5. Tertiary flow characteristics of asphalt mixtures
6. Moisture sensitivity evaluation of binder- aggregate mixtures
7. Impact of particle morphology on aggregate-asphalt interface behavior10.1016/j.conbuildmat.2016.11.132 ↗
8. Characterization of the material from the induction healing porous asphalt concrete trial section10.1617/s11527-012-9936-9 ↗
9. Moisture damage potential of cold asphalt10.1080/10298430802169838 ↗
10. Effects of conductive carbon black on PZT/PVDF composites10.1080/00150193.2018.1456308 ↗
11. A review of state of the art on stripping phenomenon in asphalt concrete10.1016/j.conbuildmat.2012.08.033 ↗
12. Possibility of using epoxy modified bitumen to replace tar-containing binder for pavement antiskid surfaces10.1016/j.conbuildmat.2013.06.080 ↗
13. Micromechanics prediction of effective modulus for asphalt mastic considering inter-particle interaction10.1016/j.conbuildmat.2015.10.053 ↗
14. Preparation and properties of montmorillonite modified asphalts10.1016/j.msea.2006.10.037 ↗
15. Performance properties of alternative polymerized asphalt mixtures containing various antistripping additives10.1061/(ASCE)MT.1943-5533.0001566 ↗
16. Low temperature grade determinations of asphalt mortar without extraction before and after one year storage duration10.1016/j.conbuildmat.2017.03.095 ↗
17. Rheological property investigations for polymer and polyphosphoric acid modified asphalt binders at high temperatures10.1016/j.conbuildmat.2014.04.082 ↗
18. Evaluation of Nano-ZnO dispersed state in bitumen with digital imaging processingtechnologies10.1520/JTE20160401 ↗
19. Study on the adhesion enhancement method of acidic aggregated rock and asphalt
20. Leaching of organic contaminants from storage of reclaimed asphalt pavement10.1080/09593330409355466 ↗
21. Harvesting energy from pavement based on piezoelectric effects: fabrication and electric properties of piezoelectric vibrator10.1063/1.5002731 ↗