Synthesis of low temperature cured alkaline activated silicomanganese fume mortar
Source abstract
Abstract
Abstract Silicomanganese (SiMn) fume is an industrial waste whose potency in the synthesis of alkaline activated mortar is yet to be explored. The major constituents of SiMn fume are SiO2, MnO2 and K2O. SiMn fume based mortar cured at room temperature (23 ± 2 °C) was synthesized with NaOH (NH) of varied molarity (4, 8 and 12) and Na2SiO3 (NS) as alkaline activators with different ratios of NS/NH (2, 2.5 and 3). The maximum 28-day compressive strength of room temperature cured mortar of 36 MPa was achieved with combined NH-12M and NS/NH of 2.5. Utilization of only NH activator produced a low strength (6.8 MPa) mortar compared to using the combined activators due to inability of pure alkali to form condensed oligomers required for gelation. The combination of NS and NH was more workable and produced significant strength that increased with molarity of NHaq due to proliferation of silica in the base material. SEM and XRD characterizations revealed that mortar of high molarity is more crystalline and denser with well compacted matrix compared to that of mild alkali (4 M). The crystalline phase in XRD was observed at 29.5° 2θ due to the formation of Nchwaningite (Mn2+2SiO3(OH)2·(H2O)). The strength development was due to high reactivity of MnO2 with NS, especially when the ratio of NS/NH was 2.5.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. The greenhouse gas emission from Portland cement concrete pavement construction in China10.3390/ijerph13070632 ↗
2. Utilization of fly ash with silica fume and properties of Portland cement–fly ash–silica fume concrete10.1016/j.fuel.2009.10.003 ↗
3. Effect of GGBFS on compressive strength and durability of concrete10.4028/www.scientific.net/AMR.1145.22 ↗
4. A mix design procedure for alkali-activated high-calcium fly ash concrete cured at ambient temperature
5. Effect of alkaline activators and binder content on the properties of natural pozzolan-based alkali activated concrete10.1016/j.conbuildmat.2017.04.163 ↗
6. Enhancement of the properties of fly ash based geopoly mer paste by incorporating ground granulated blast furnace slag10.1016/j.conbuildmat.2017.04.139 ↗
7. Durability of alkali-activated fly ash cementitious materials10.1007/s10853-006-0584-8 ↗
8. The effect of adding nano-SiO2 and nano-Al2O3 on properties of high calcium fly ash geopolymer cured at ambient temperature10.1016/j.matdes.2013.09.049 ↗
9. Geopolymer concrete: a review of some recent developments10.1016/j.conbuildmat.2015.03.036 ↗
10. Influence of curing methods and concentration of NaOH on strength of the synthesized alkaline activated ground slag-ultrafine palm oil fuel ash mortar/concrete10.1016/j.conbuildmat.2014.05.037 ↗
11. The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature10.1016/j.matdes.2014.05.001 ↗
12. Effects of curing temperature and NaOH addition on hydration and strength development of clinker-free CKD-fly ash binders10.1016/j.cemconres.2003.08.003 ↗
13. Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio10.1016/S0167-577X(00)00212-3 ↗
14. NaOH alkali-activated class F fly ash: NaOH molarity, curing conditions and mass ratio effect
15. Effect of sodium hydroxide (NaOH) concentration on compressive strength of alkali-activated slag (AAS) mortars
16. Evaluation of the suitability of ground granulated silico-manganese slag in Portland slag cement10.1016/j.conbuildmat.2016.08.025 ↗
17. Development of alkali activated cement from mechanically activated silico-manganese (SiMn) slag10.1016/j.cemconcomp.2013.03.026 ↗
18. Effect of incorporating ferroalloy industry wastes as complementary cementing materials on the properties of blended cement matrices10.1016/j.cemconcomp.2007.05.004 ↗
19. ASTM C1437 – 15, Standard Test Method for Flow of Hydraulic Cement Mortar.
20. ASTM C109/C109M – 13, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars.
21. ASTM C348 – 14, Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars.
22. Impacts of silica modulus on the early strength of alkaline activated ground slag/ultrafine palm oil fuel ash based concrete10.1617/s11527-014-0318-3 ↗
23. Effect of solids-to-liquids, Na2SiO3-to-NaOH and curing temperature on the palm oil boiler ash (Si + Ca) geopolymerisation system10.3390/ma8052227 ↗
24. The influence of the NaOH solution on the properties of the fly ash-based geopolymer mortar cured at different temperatures10.1016/j.compositesb.2013.10.082 ↗
25. Synthesis and mechanical properties of metakaolinite-based geopolymer
26. Characterization of natural pozzolan-based geopolymeric binders10.1016/j.cemconcomp.2014.06.010 ↗
27. Effects of sodium hydroxide and sodium silicate solutions on compressive and shear bond strengths of FA-GBFS geopolymer10.1016/j.conbuildmat.2015.05.001 ↗
28. The geopolymerisation of alumino-silicate minerals10.1016/S0301-7516(99)00074-5 ↗
29. Effect of Na2SiO3/NaOH ratios and NaOH molarities on compressive strength of fly-ash-based geopolymer
30. Optimization of the alkaline activation process of difficult-to-treat inorganic wastes
31. Optimization of NaOH molarity, LUSI mud/alkaline activator, and Na2SiO3/NaOH ratio to produce lightweight aggregate-based geopolymer10.3390/ijms160511629 ↗
32. Properties of concrete made with alkali-activated fly ash lightweight aggregate (AFLA)10.1016/j.cemconcomp.2006.09.004 ↗
33. Effect of nano-silica on strength and durability of fly ash based geopolymer mortar10.1016/j.conbuildmat.2014.07.093 ↗