journal article·2019-05

Mechanical properties of seawater sea-sand concrete reinforced with discrete BFRP-Needles

Zhiqiang Dong, Gang Wu, Hong Zhu

Publisher page

Abstract

Abstract To recycle the fiber-reinforced polymer (FRP) waste, a new type of discrete slender FRP element reinforced seawater sea-sand concrete (SWSSC) was proposed in this paper. This element, referred to as “Basalt-FRP (BFRP)-Needles”, is produced by cutting BFRP bar waste into 100 mm rod-shaped elements. BFRP-Needles were incorporated into SWSSC to partially replace the coarse natural aggregate by volume. Test results indicate that there was no significant difference in the compressive strength for SWSSCs that incorporated 6 mm, 8 mm or 10 mm BFRP-Needles with the same volume replacement ratio. When the volume replacement ratio was less than 15%, the compressive strength decreased with the increasing replacement ratio, and the maximum decrease was 10%. The splitting tensile strength of specimens with a 5%, 10%, 15%, and 20% volume replacement ratio was increased by 4%, 11%, 2%, and 32%, respectively, compared to that of the NA (Control) specimen. The flexural strength of specimens with a 5%, 10%, 15%, and 20% volume replacement ratio was decreased by 6%, 14%, 10%, and 6%, respectively, compared to that of the NA (Control) specimens. The incorporation of BFRP-Needles in SWSSC resulted in significant increases in the fracture toughness, especially for the high volume replacement ratio of 20%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. The specialities of fibre-reinforced plastics in terms of product lifecycle management10.1016/j.jmatprotec.2005.02.226 ↗
2. N. Reynolds, M. Pharaoh. An introduction to composites recycling, Management, Recycling and Reuse of Waste Composites, 2010, pp. 3–19.10.1533/9781845697662.1.3 ↗
3. Assessing the recycling potential of glass fibre reinforced plastic waste in concrete and cement composites10.1016/j.jclepro.2008.12.004 ↗
4. A critical review of research on reuse of mechanically recycled FRP production and end-of-life waste for construction10.3390/polym6061810 ↗
5. Concrete with discrete slender elements from mechanically recycled wind turbine blades10.1016/j.resconrec.2017.08.005 ↗
6. Composite recycling in the construction industry10.1016/j.compositesa.2005.05.031 ↗
7. Characterisation of products from the recycling of glass fibre reinforced polyester waste by pyrolysis10.1016/S0016-2361(03)00129-7 ↗
8. Composite recycling – Where are we now?
9. Recycling solid residues recovered from glass fibre-reinforced composites – a review applied to wind turbine blade materials10.1177/0731684414537131 ↗
10. Mechanical recycling of GFRP waste as short-fiber reinforcements in microconcrete10.1016/j.conbuildmat.2014.02.068 ↗
11. Re-use assessment of thermoset composite wastes as aggregate and filler replacement for concrete-polymer composite materials: a case study regarding GFRP pultrusion wastes10.1016/j.resconrec.2013.10.001 ↗
12. Effect of low dosages of waste GRP dust on fresh and hardened properties of mortars: Part 110.1016/j.conbuildmat.2013.06.043 ↗
13. Sustainable waste recycling solution for the glass fibre reinforced polymer composite materials industry10.1016/j.conbuildmat.2013.03.092 ↗
14. F. Arias, Assessment of Present/Future Decommissioned Wind Blade Fiber Reinforced Composite Material in the United States, Independent Study Report, Supervisor: L.C. Bank, City College of New York, 2016.
15. Green concrete made with RCA and FRP scrap aggregate: fresh and hardened properties10.1061/(ASCE)MT.1943-5533.0000742 ↗
16. Mechanical processing of GFRP waste into large-sized pieces for use in concrete10.3390/recycling3010008 ↗
17. Use of recycled FRP reinforcing bar in concrete as coarse aggregate and its impact on the mechanical properties of concrete10.1016/j.conbuildmat.2016.05.165 ↗
18. FRP-Needles as discrete reinforcement in concrete10.1061/(ASCE)MT.1943-5533.0002033 ↗
19. G.M. Chen, Z.B. He, T. Jiang, J.F. Chen, J.G. Teng, Axial compression tests on FRP-confined seawater/sea-sand concrete, in: 6th Asia-Pacific Conference on FRP in Structures, Singapore, 19–21st July 2017.
20. Bond and flexural behavior of sea sand concrete members reinforced with hybrid steel-composite bars presubjected to wet-dry cycles10.1061/(ASCE)CC.1943-5614.0000749 ↗
21. Theoretical model for seawater and sea sand concrete-filled circular FRP tubular stub columns under axial compression10.1016/j.engstruct.2018.01.017 ↗
22. Use of sea-sand and seawater in concrete construction: current status and future opportunities10.1016/j.conbuildmat.2017.08.130 ↗
23. Mechanical properties of seawater and sea sand concrete-filled FRP tubes in artificial seawater10.1016/j.conbuildmat.2018.10.059 ↗
24. Long-term bond durability of fiber reinforced polymer bars embedded in seawater sea-sand concrete under ocean environments10.1061/(ASCE)CC.1943-5614.0000876 ↗
25. R. Nong, The experimental study on mechanical properties of sea sand concrete components. Master thesis, Harbin Institute of Technology, Harbin, China, 2008 (in Chinese).
26. A, Experimental study on seawater and sea sand concrete filled GFRP and stainless steel tubular stub columns10.1016/j.tws.2016.05.014 ↗
27. JGJ 52-2006, Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete, Ministry of Construction of the PR China, Beijing, 2006 (in Chinese).
28. ACI 222R-01, Protection of Metals in Concrete Against Corrosion. American Concrete Institute, Farmington Hills, USA, 2001.
29. GB/T 50081-2002, Standard for test method of mechanical properties on ordinary concrete, Ministry of Construction of the PR China, Beijing, 2002 (in Chinese).
30. Durability study on interlaminar shear behaviour of basalt-, glass-and carbon-fibre reinforced polymer (B/G/CFRP) bars in seawater sea sand concrete environment10.1016/j.conbuildmat.2017.09.045 ↗
31. Long-term durability of basalt-and glass-fibre reinforced polymer (BFRP/GFRP) bars in seawater and sea sand concrete environment10.1016/j.conbuildmat.2017.02.038 ↗
32. Effect of sustained load and seawater and sea sand concrete environment on durability of basalt- and glass-fibre reinforced polymer (B/GFRP) bars10.1016/j.corsci.2018.04.002 ↗
33. Bond durability of BFRP bars embedded in concrete under seawater conditions and the long-term bond strength prediction10.1016/j.matdes.2015.12.066 ↗