Micro-mechanical analysis of high modulus asphalt concrete pavement
Source abstract
Abstract
Abstract The objective of this study is to investigate the micro-mechanical characteristics of High Modulus Asphalt Concrete (HMAC) pavement structure under loads. The Discrete Element Method (DEM) was employed in this study to build the models for HMAC pavement and conventional asphalt pavement structures. The laboratory tests and DEM simulations of uniaxial compression tests were conducted on the materials of HMAC pavement structure layers. To simulate the mechanical behavior of the asphalt mixture, micro-parameters were adjusted to fit with the strain–stress curve results from lab-test. The displacement and stress distribution in vertical and horizontal directions, and the shear stress in the horizontal direction were analyzed for the HMAC pavement and conventional asphalt pavement. The results showed that the maximum vertical displacement of HMAC pavement (0.25–0.293 mm) was less than that of the conventional asphalt pavement (0.3–0.324 mm). The application of HMAC decreased the vertical stress in all structural layers except the upper surface layer. The HMAC decreased the horizontal stress in the subbase layer. Though the HMAC pavement had a slightly greater horizontal shear stress in the upper and middle surface layers than the conventional asphalt pavement, its shear resistance was. Therefore, the results indicated HMAC layer can enhance the resistance to deformation and reduce the rutting potential in asphalt pavement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Development and uses of hard-grade asphalt and of high-modulus asphalt mixes in France
2. Assessing permanent deformation resistance of high modulus asphalt mixtures10.1061/(ASCE)0733-947X(2006)132:5(394) ↗
3. The use of additives for the improvement of the mechanical behavior of high modulus asphalt mixes10.1016/j.conbuildmat.2014.07.115 ↗
4. High temperature performance of SBS modified bio-asphalt10.1016/j.conbuildmat.2017.03.103 ↗
5. Performance evaluation of high modulus asphalt mixtures for long life asphalt pavements10.1016/j.conbuildmat.2006.01.003 ↗
6. Study on durability of high-modulus asphalt mixture based on TLA and fibre composite modification technology10.1080/10298436.2016.1224411 ↗
7. Laboratory performance characteristics of high modulus asphalt mixture with high-content RAP10.1016/j.conbuildmat.2015.10.160 ↗
8. Comparison of low-temperature cracks intensity on pavements with high modulus asphalt concrete and conventional asphalt concrete bases10.1016/j.conbuildmat.2017.04.179 ↗
9. Evaluation of high modulus mixture behaviour with high reclaimed asphalt pavement (RAP) percentages for sustainable road construction10.1016/j.conbuildmat.2011.04.006 ↗
10. Simulation of permanent deformation in high-modulus asphalt pavement with sloped and horizontally curved alignment10.3390/app7040331 ↗
11. Fatigue life prediction of high modulus asphalt concrete based on the local stress-strain method10.3390/app7030305 ↗
12. Characterization of air void distribution in asphalt mixes using X-ray computed tomography10.1061/(ASCE)0899-1561(2002)14:2(122) ↗
13. Comparison of laboratory compaction methods using x-ray computer tomography10.1080/14680629.2007.9690071 ↗
14. Image-aided element shape generation method in discrete-element modeling for railroad ballast10.1061/(ASCE)MT.1943-5533.0000839 ↗
15. Distribution of strains within hot-mix asphalt binders: applying imaging and finite-element techniques10.3141/1728-04 ↗
16. Characterising the asphalt concrete fracture performance from X-ray CT Imaging and finite element modelling10.1080/10298436.2017.1347440 ↗
17. Effect of anisotropic characteristics on the mechanical behavior of asphalt concrete overlay10.1007/s11709-018-0476-4 ↗
18. Micromechanical simulation of hot mix asphalt
19. Application of discrete element modeling techniques to predict the complex modulus of asphalt–aggregate hollow cylinders subjected to internal pressure10.1177/0361198105192900126 ↗
20. Discrete element modeling of asphalt concrete: microfabric approach10.3141/1757-13 ↗
21. Micromechanical fracture modeling of asphalt mixture using the discrete element method
22. Micromechanical modeling of the viscoelastic behavior of asphalt mixtures using the discrete-element method10.1061/(ASCE)1532-3641(2007)7:2(131) ↗
23. Application of discrete element method to Superpave gyratory compaction10.1080/14680629.2012.694160 ↗
24. Discrete element modeling of realistic particle shapes in stone-based mixtures through MATLAB-based imaging process10.1016/j.conbuildmat.2017.03.037 ↗
25. Lab assessment and discrete element modeling of asphalt mixture during compaction with elongated and flat coarse aggregates10.1016/j.conbuildmat.2018.06.059 ↗
26. Liu, Y., et al., Determining aggregate grain size using discrete-element models of sieve analysis, 2019, 19, 4, p. 04019014.10.1061/(ASCE)GM.1943-5622.0001376 ↗
27. The bonded-particle model as a tool for rock mechanics research and application: current trends and future directions10.1080/12269328.2014.998346 ↗
28. Comparative study of 2D and 3D micromechanical discrete element modeling of indirect tensile tests for asphalt mixtures10.1061/(ASCE)GM.1943-5622.0001155 ↗
29. Viscoelastic model for discrete element simulation of asphalt mixtures
30. Discrete element modelling of creep of asphalt mixtures10.1080/17486025.2015.1006689 ↗
31. Numerical fracture analysis on the specimen size dependency of asphalt concrete using a cohesive softening model10.1016/j.conbuildmat.2008.08.014 ↗
32. Numerical simulation of an indirect tensile test for asphalt mixtures using discrete element method software10.1061/(ASCE)MT.1943-5533.0002252 ↗
33. Visualization and simulation of asphalt concrete with randomly generated three-dimensional models10.1061/(ASCE)0887-3801(2009)23:6(340) ↗
34. Discrete-element modeling: impacts of aggregate sphericity, orientation, and angularity on creep stiffness of idealized asphalt mixtures