journal article·2019-09

Effect of the EBROG method on strip-to-concrete bond behavior

Amir Tajmir-Riahi, Niloufar Moshiri, Christoph Czaderski, Davood Mostofinejad

Publisher page

Abstract

Abstract The bond behavior of precured FRP strips and steel plates to concrete substrate was investigated in this research in terms of the load capacity, slip and strain distribution and debonding mechanism. Experimental single lap shear tests were performed and an experimental-analytical model was proposed to determine the bond strength of the FRP-bonded joints. Two strengthening methods, including externally bonded reinforcement (EBR) and externally bonded reinforcement on groove (EBROG), were compared. A two-dimensional digital image correlation (2D-DIC) system was utilized to measure the full-field deformations. Compared to the 90 mm effective bond length for the EBR method, the effective bond lengths for the EBROG method were equal to 145 and 160 mm for 5 × 5 and 5 × 10 mm groove cross sections, with 92% and 112% higher loads, respectively. In addition, the results showed that the EBROG method improved the bond resistance of steel-to-concrete joints, but it was not as efficient as it was for the FRP-to-concrete bonded joints. Furthermore, the crack propagation underneath the strip was assessed for the first time for the EBROG method, by using a side-view measurement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Anchorage strength models for FRP and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
2. Bond–slip models for FRP sheets/plates bonded to concrete10.1016/j.engstruct.2005.01.014 ↗
3. Transfer lengths and bond strengths for composites bonded to concrete10.1061/(ASCE)1090-0268(1999)3:4(153) ↗
4. Bond and force transfer of composite material plates bonded to concrete
5. Analytical modeling of the bond–slip relationship at FRP-concrete interfaces for adhesively-bonded joints10.1016/j.compositesb.2010.06.004 ↗
6. Experimental study on FRP-to-concrete bonded joints10.1016/j.compositesb.2004.06.001 ↗
7. A state-of-the-art review on debonding failures of FRP laminates externally adhered to concrete10.1007/s40069-012-0012-1 ↗
8. A novel methodology for shear cohesive law identification of bonded reinforcements10.1016/j.compositesb.2018.02.027 ↗
9. A unified theoretical model for the monotonic and cyclic response of FRP strips glued to concrete10.3390/polym6020370 ↗
10. Effects of coarse aggregate volume on CFRP-concrete bond strength and behavior10.1016/j.conbuildmat.2018.11.188 ↗
11. American Concrete Institute (ACI), ACI 440.2R-08, Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, Farmington Hills, MI, 2008.
12. Generic debonding resistance of EB and NSM plate-to-concrete joints10.1061/(ASCE)1090-0268(2007)11:1(62) ↗
13. Standards Australia, HB 305-2008, Design Handbook for RC Structures Retrofitted with FRP and Metal Plates: Beams and Slabs, Sydney, NSW, Australia, 2008.
14. Grooving as alternative method of surface preparation to postpone debonding of FRP laminates in concrete beams10.1061/(ASCE)CC.1943-5614.0000117 ↗
15. Externally bonded reinforcement in grooves (EBRIG) technique to postpone debonding of FRP sheets in strengthened concrete beams10.1016/j.conbuildmat.2012.09.030 ↗
16. Strengthening of RC columns by longitudinal CFRP sheets: effect of strengthening technique10.1016/j.conbuildmat.2015.01.040 ↗
17. Compressive strength of CFRP composites used for strengthening of RC columns: comparative evaluation of EBR and grooving methods10.1061/(ASCE)CC.1943-5614.0000545 ↗
18. Experimental study of circular RC columns strengthened with longitudinal CFRP composites under eccentric loading: comparative evaluation of EBR and EBROG methods10.1061/(ASCE)CC.1943-5614.0000618 ↗
19. Experimental INVESTIGATION OF THE EFFICacy of EBROG method in seismic rehabilitation of deficient reinforced concrete beam-column joints using CFRP sheets10.1061/(ASCE)CC.1943-5614.0000781 ↗
20. 3D beam–column corner joints retrofitted with X-shaped FRP sheets attached via the EBROG technique10.1016/j.engstruct.2019.01.038 ↗
21. Experimental study on effect of EBR and EBROG methods on debonding of FRP sheets used for shear strengthening of RC beams10.1016/j.compositesb.2012.09.081 ↗
22. Bond behavior of CFRP sheets attached to concrete through EBR and EBROG joints subject to mixed-mode I/II loading10.1061/(ASCE)CC.1943-5614.0000816 ↗
23. Effect of groove characteristics on CFRP-to-concrete bond behavior of EBROG joints: experimental study using particle image velocimetry (PIV)10.1016/j.conbuildmat.2013.08.036 ↗
24. Investigating the effects of concrete compressive strength, CFRP thickness and groove depth on CFRP-concrete bond strength of EBROG joints10.1016/j.conbuildmat.2018.08.203 ↗
25. Bond mechanism of EBROG method using a single groove to attach CFRP sheets on concrete10.1016/j.conbuildmat.2018.11.204 ↗
26. Empirical FRP-concrete effective bond length model for externally bonded reinforcement on the grooves10.1016/j.compositesb.2019.05.068 ↗
27. Empirical FRP-concrete bond strength model for externally bonded reinforcement on grooves10.1061/(ASCE)CC.1943-5614.0000924 ↗
28. Bond resistance of a single groove in EBROG method to attach CFRP sheets on concrete
29. Bond behavior of pre-cured CFRP strips to concrete using externally bonded reinforcement on groove (EBROG) method
30. Experimental and analytical study on CFRP strips-to-concrete bonded joints using EBROG method10.1016/j.compositesb.2018.09.046 ↗
31. 2013
32. ASTM D3039/D3039M, Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials; 2000.
33. Inquiry into bond behavior of CFRP sheets to concrete exposed to elevated temperatures – Experimental & analytical evaluation10.1016/j.compositesb.2019.05.108 ↗
34. Displacement and strain field measurement in steel and RC beams using particle image velocimetry
35. Fernando · 2010
36. Behavior of prestressed CFRP plates bonded to steel substrate: numerical modeling and experimental validation10.1016/j.compstruct.2018.09.023 ↗
37. Czaderski · 2012
38. Schweizerischer Ingenieur- und Architektenverein (SIA), SIA166, Klebebewehrungen (Externally bonded reinforcement), Zurich, Switzerland, 2004.