journal article·2019-11

Theoretical, experimental and numerical study of aluminium-timber composite beams with screwed connections

Marcin Chybiński, Łukasz Polus

Publisher page

Abstract

Abstract The present study investigated the structural behaviour of aluminium-timber composite (ATC) beams. In the proposed ATC system, a timber slab was connected to aluminium girders by hexagon head wood screws. ATC beams are a relatively new civil engineering solution and their behaviour should be investigated to develop relevant methods for calculating their resistance. The authors examined the stiffness and the strength of the screwed connection used to join an aluminium girder with a timber slab. The slip moduli k0.4 and k0.6, and the peak load capacity per one connector were determined experimentally in two push-out tests. These parameters are necessary for designing ATC beams, because the behaviour of an ATC system is depended on the stiffness and the strength of its connections. Moreover, two bending tests were conducted on ATC beams to investigate their short-term behaviour, determine their bending resistance and capture the mode of failure, load-deflection and load-slip response. Based on the guidelines for timber and composite (steel-timber and steel-concrete) elements, the authors of this paper proposed the methods for calculating the bending resistance of the ATC beams, and the stiffness and strength of their screwed connections. The results obtained in the experimental tests were compared with the results from the analytical estimations. In addition, non-linear 3D finite element (FE) models of the tested composite beams and connections were developed and verified against the experimental results. The comparison between the experimental and numerical results demonstrated that the adopted 3D models were able to adequately capture the response of the ATC composite beams and their connections. These models may be used in further numerical analysis of ATC structures, e.g., to evaluate the impact of the number of the shear connectors on the load-bearing capacity of an ATC beam.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Load-Bearing Analysis · Wood Treatment and Properties · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (91)

Show source-provided references
1. Experimental and analytical behaviour of steel-timber composite connections10.1016/j.conbuildmat.2016.05.052 ↗
2. Experimental and numerical study of steel-timber composite (STC) beams10.1016/j.jcsr.2016.04.005 ↗
3. Modelling of steel-timber composite connections: validation of finite element model and parametric study10.1016/j.engstruct.2017.02.016 ↗
4. Composite connections between CLT slab and steel beam: experiments and empirical models10.1016/j.jcsr.2017.09.002 ↗
5. C. Dickof, S. F. Stiemer, S. Tesfamariam, Wood-steel hybrid seismic force resisting systems: seismic ductility, World Conference on Timber Engineering, 16–19 July, Aucland 2012.
6. Structural behavior of timber aluminum composite beams under static loads
7. Structural behavior of timber aluminum composite beams under impact loads
8. Preliminary analysis of the aluminium-timber composite beams
9. Innovative composite structures
10. Engineered aluminium beams for anchoring timber buildings to foundation10.2749/101686617X14881932435736 ↗
11. On the anchoring of timber walls to foundations: available strategies to prevent wood deterioration and on-site installation problems10.1016/j.prostr.2018.11.037 ↗
12. M. Gwóźdź, Project problems of contemporary aluminium structures, Czasopismo Techniczne 104 (z. 4-A) (2007) 281–286 [in Polish].
13. Structural behaviour of aluminium bridge deck panels10.1016/j.engstruct.2009.02.002 ↗
14. Modern trends in the use of special metals for the improvement of historical and monumental structures10.1016/S0141-0296(02)00023-8 ↗
15. 3D aluminium structures10.1016/j.tws.2012.07.017 ↗
16. Aluminium in the modern building constructions
17. Aluminium bridges – past, present and future10.2749/101686606778995137 ↗
18. An numerical simulation of an aluminium-concrete beam10.1016/j.proeng.2017.02.167 ↗
19. Applications of aluminium and concrete composite structures10.1016/j.proeng.2015.06.176 ↗
20. Tests of shear connectors used in aluminium-concrete composite structures
21. Flexural behaviour of CFRP strengthened concrete-filled aluminium alloy CHS tubes10.1016/j.conbuildmat.2017.03.040 ↗
22. Diagonal versus orthogonal ribs in stability of steel I beams10.1016/j.proeng.2017.02.046 ↗
23. Behaviour of aluminium alloy structures under fire10.1080/13923730.2004.9636305 ↗
24. Bending resistance of metal-concrete composite beams in a natural fire
25. Stresses in a layered, composite structure fabricated from materials of different thermal expansions
26. Large deflections of shells subjected to an external load and temperature changes10.1016/S0020-7683(96)00045-5 ↗
27. European Committee for Standardization, EN 1994-1-1, Eurocode 4, Design of composite steel and concrete structures – Part 1-1: General rules and rules for buildings. Brussels 2004.
28. Design based on sustainable development
29. European Committee for Standardization, EN 1999-1-1, Eurocode 9, Design of aluminium structures – Part 1-1: General structural rules, Brussels 2007.
30. Selected aspects of the proper application of structural materials in terms of corrosion
31. A. M. Harte, Timber engineering: an introduction, [in:] M. Forde [Edit.], ICE Manual of Construction Materials, Chapter 60, 2009.10.1680/mocm.35973.0707 ↗
32. Experimental and numerical analyses of new massive wooden shear-wall systems10.3390/buildings4030355 ↗
33. Review on antibacterial biocomposites of structural laminated veneer lumber10.1016/j.sjbs.2015.09.025 ↗
34. M. Komorowski, Manual of design and build in the STEICO system, Basic information, Building physics, Guidelines, Forester Communication, Warsaw 2017 [in Polish].
35. Wood frame floor model of LVL Paraserianthes falcataria10.1016/j.proeng.2017.01.317 ↗
36. Impacts of some chemicals on combustion properties of impregnated laminated veneer lumber (LVL)10.1016/j.jmatprotec.2007.10.003 ↗
37. Effect of scarf joints on bending strength and modulus of elasticity to laminated veneer lumber (LVL)10.1016/j.buildenv.2005.12.024 ↗
38. Strength modelling of Laminated Veneer Lumber (LVL) beams10.1016/j.conbuildmat.2017.05.153 ↗
39. A simple strategy for constitutive modelling of timber10.1016/j.conbuildmat.2013.11.100 ↗
40. Nonlinear finite element analysis of timber beams and joints using the layered approach and hypoelastic constitutive law10.1016/j.engstruct.2012.08.017 ↗
41. Experimental behaviour of LVL-concrete composite floor beams at strength limit state10.1016/j.engstruct.2011.05.021 ↗
42. Experimental and analytical investigation of short-term behavior of LVL-concrete composite connections and beams10.1016/j.conbuildmat.2012.07.022 ↗
43. Laboratory tests of composite wood-concrete beams10.1016/j.conbuildmat.2007.03.013 ↗
44. Time-dependent behaviour of timber–concrete composite floors with prefabricated concrete slabs10.1016/j.engstruct.2013.03.031 ↗
45. Connections for composite concrete slab and LVL flooring systems10.1617/s11527-007-9261-x ↗
46. Long-term and collapse tests on a timber-concrete composite beam with glued-in connection10.1617/s11527-006-9094-z ↗
47. Numerical investigation of structural behavior of timber-glass composite beams10.1016/j.proeng.2016.08.838 ↗
48. Numerical analysis of crack development of timber-glass composite I-beams in the extended finite element method (XFEM)10.1016/j.compstruct.2018.01.111 ↗
49. Contactless optical measurement methods for glass beams and composite timber-glass I-beams10.1016/j.measurement.2018.09.061 ↗
50. Experimental investigations of load-bearing capacity of composite timber-glass I-beams10.1016/j.acme.2018.02.002 ↗
51. Direct displacement-based design of a novel hybrid structure: steel moment-resisting frames with cross-laminated timber infill walls10.1193/101514EQS159M ↗
52. S. Stiemer, S. Tefamariam, E. Karacabeyli, M. Popovski, Development of steel-wood hybrid systems for buildings under dynamic loads, Behaviour of Steel Structures in Seismic Areas STESSA 2012, January 9 – 11, Santiago, Chile, 2012.
53. Seismic performance evaluation of timber-steel hybrid structure through large-scale shaking table tests10.1016/j.engstruct.2018.08.029 ↗
54. W. Winter, K. Tavoussi, T. Pixner, F. R. Parada, Timber-steel-hybrid beams for multi-storey buildings, World Conference on Timber Engineering, 16-19 July, Auckland 2012.
55. Experimental and numerical investigation of short-term behaviour of CLT-steel composite beams10.1016/j.engstruct.2017.04.052 ↗
56. Steel-timber composite beam-to-column joints: effect of connections between timber slabs10.1016/j.jcsr.2018.09.019 ↗
57. Experimental study of steel-timber composite (STC) beam to steel column joints having a flush end-plate10.1016/j.engstruct.2018.08.009 ↗
58. Structural behaviour of steel-timber composite (STC) beam-to-column connections with double angle web cleats subjected to hogging bending moment10.1016/j.engstruct.2019.04.092 ↗
59. Modelling of steel-timber composite connections: validation of finite element model and parametric study10.1016/j.engstruct.2017.02.016 ↗
60. Connections for steel-timber hybrid prefabricated buildings. Part I: experimental tests10.1016/j.conbuildmat.2015.12.002 ↗
61. Connections for steel-timber hybrid prefabricated buildings. Part II: innovative modular structures
62. Numerical analysis of timber-to-timber joints and composite beams with inclined self-tapping screws10.1016/j.compstruct.2018.09.008 ↗
63. Theoretical and experimental analysis of timber-to-timber joints connected with inclined screws10.1016/j.conbuildmat.2010.03.007 ↗
64. Testing of timber-to-timber screw-connections in hybrid configurations10.1016/j.conbuildmat.2018.03.078 ↗
65. Lateral-torsional buckling analysis of wood composite I-beams with sinusoidal corrugated web10.1016/j.tws.2017.05.025 ↗
66. Development of shear connections in steel-concrete composite structures
67. Testing procedures in evaluation of resistance of innovative shear connection with composite dowels10.1016/S1644-9665(12)60136-8 ↗
68. The effect of ductile connectors on the behaviour of timber-concrete composite beams10.1016/j.engstruct.2011.05.014 ↗
69. Performance of connections for prefabricated timber-concrete composite floors10.1617/s11527-007-9346-6 ↗
70. DIN 571:2016-12, Hexagon head wood screws.
71. Investigation on bonding between timber and ultra-high performance concrete (UHPC)10.1016/j.conbuildmat.2010.12.060 ↗
72. Stiffness and capacity of steel-concrete composite beams with profiled sheeting10.1016/j.engstruct.2005.02.016 ↗
73. Bärtschi · 2005
74. M.V. Leskelä, Shear connections in composite flexural members of steel and concrete, ECCS, Technical Committee 11, Composite Structures, No 138, 2017.
75. Analysis of the resistance and the stiffness of the composite beams, depending on the degree of shear connection
76. A finite element model for long-term analysis of timber-concrete composite beams10.12989/sem.2005.20.2.173 ↗
77. Experimental behaviour of full-scale timber-concrete composite floor with mechanical connectors10.1617/s11527-012-9869-3 ↗
78. Laboratory tests of new connectors for timber-concrete composite structures
79. Connection stiffness between thin-walled beam and sandwich panel
80. European Committee for Standardization, EN 1995-1-1, Eurocode 5, Design of timber structures – Part 1-1: General – Common rules and rules for buildings, Brussels 2004.
81. Commercial document to STEICO LVL R according to EN 14374:2004.
82. European Committee for Standardization, EN ISO 6892-1, Metallic materials – Tensile testing – Part 1: Method of test at room temperature, Brussels 2016.
83. The evaluation of the fracture surface in the AW-6060 T6 aluminium alloy under a wide range of loads10.3390/met9030324 ↗
84. EN 26891, Timber structures – Joints made with mechanical fasteners – General principles for the determination of strength and deformation characteristics, 1991.
85. Abaqus 6.13 Documentation, Abaqus Analysis Users Guide, Abaqus Theory Guide.
86. An experimental and numerical study of aluminium-concrete joints and composite beams10.1016/j.acme.2018.11.007 ↗
87. M. Chybiński, Ł. Polus, W. Szwabiński, P. Niewiem, FE analysis of steel-timber composite beams, in: AIP Conference Proceedings 2078 (2019), article number: 020061, DOI: 10.1063/1.5092064.10.1063/1.5092064 ↗
88. Finite element modelling of the connection for timber-concrete composite beams10.1088/1757-899X/471/5/052081 ↗
89. Validation of computational models of steel-concrete composite beams
90. D. Yeoh, M. Fragiacomo, P. Aldi, M. Mazzilli, U. Kuhlmann, Performance of notched coach screw connection for timber-concrete composite floor system, 10th World Conference on Timber Engineering, 2-5 June 2008, Miyazaki, Japan, paper 221.
91. European Committee for Standardization, EN 1990, Eurocode 0, Basis of structural design, Brussels 2002.