Water-resistance properties of high-belite sulphoaluminate cement-based ultra-light foamed concrete treated with different water repellents
Source abstract
Abstract
Abstract The high water absorption (Wv) of FC, especially ultra-light FC (ULFC), tends to increase the structure burden, reduce the strength, reduce the thermal and sound insulation performance, and make the frost resistance deterioration, which limits its wide development in prefabrication insulation panel industry. In order to effectively reduce the WV at varied water soaking time of ULFC, four types of powdery water repellents (PWR) including calcium stearate (CS), zinc stearate (ZS), polysiloxane (PS) and re-dispersible latex powder (RDL) were doped into high-belite sulphoaluminate cement-based ULFC with dosages varying from 0.5 wt% to 4.0 wt% to prepare water-resistant ULFC with the dry density (ρd) from 270 kg/m3 to 300 kg/m3. Two types of liquid water repellents (LWR) of methyl polysiloxane resin (MPR) and hydrogenated silicone oil (HSO) were used to treat the pristine ULFC by the soaking or surface coating method to explore the water-resistant effect of sole LWR or the combination of LWR and CS on the ULFC. A silane coupling agent (KH550) was further used to promote the LWR to solidify the formation of water-resistant film. The connected pores of ULFC doped with CS, ZS, PS and RDL are effectively reduced; and the pore walls of ULFC doped with CS, ZS and PS become more compact than the control ones. CS, ZS and PS dosage all can reduce the WV of ULFC, and the ULFC doped with 4 wt% CS has the lowest WV of 23.6 wt%, and the strength loss coefficient after saturation is close to 0. The water-resistant effect of LWR is superior to that of PWR, the soaking method is better than surface coating method in reducing WV, and the ULFC treated with HSO and KH550 has the lowest 72 h WV of 4.4 wt% owing to its capillary clogging mechanism, and the corresponding contact angle can reach 125.87°.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Sodium carbonate activated slag as cement replacement in autoclaved aerated concrete10.1016/j.ceramint.2017.01.144 ↗
2. Preliminary views on the potential of foamed concrete as a structural material10.1680/macr.2005.57.1.21 ↗
3. Experimental research on properties of high-strength foamed concrete
4. Experimental investigations on the physical and rheological characteristics of sand-foam mixtures10.1016/j.jnnfm.2015.04.003 ↗
5. Shear strength of concrete interfaces with infra-lightweight and foam concrete10.1002/suco.201700015 ↗
6. Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete10.1016/j.cemconcomp.2015.03.013 ↗
7. Proportioning and characterization of Portland cement-based ultra-lightweight foam concretes10.1016/j.conbuildmat.2015.01.051 ↗
8. Bond properties of lightweight concrete – a review10.1016/j.conbuildmat.2016.02.125 ↗
9. Preparation and optimization of ultra-light and thermal insulative aerogel foam concrete10.1016/j.conbuildmat.2019.01.212 ↗
10. A classification of studies on properties of foam concrete10.1016/j.cemconcomp.2009.04.006 ↗
11. Experimental investigation on the compressive strength of foamed concrete: effect of curing conditions, cement type, foaming agent and dry density10.1016/j.conbuildmat.2017.12.241 ↗
12. Calcination of green high-belite sulphoaluminate cement (GHSC) and performance optimizations of GHSC-based foamed concrete10.1016/j.matdes.2019.107986 ↗
13. Cellular concrete properties and the effect of synthetic and protein foaming agents10.1016/j.conbuildmat.2013.03.024 ↗
14. Utilization of original phosphogypsum for the preparation of foam concrete10.1016/j.conbuildmat.2016.04.028 ↗
15. Pore characteristics in one-part mix geopolymers foamed by H2O2: the impact of mix design10.1016/j.matdes.2017.05.084 ↗
16. Alkali activated slag foams: the effect of the alkali reaction on foam characteristics10.1016/j.jclepro.2017.01.134 ↗
17. Enhancing the strength of pre-made foams for foam concrete applications10.1016/j.cemconcomp.2017.12.014 ↗
18. The effect of porosity on the strength of foamed concrete10.1016/S0008-8846(01)00665-2 ↗
19. Study on the preparation and properties of high-porosity foamed concretes based on ordinary Portland cement10.1016/j.matdes.2015.12.068 ↗
20. Quantification of factors influencing the thermal conductivity of cement-based foam10.1016/j.cemconcomp.2018.04.015 ↗
21. Khan · 2014
22. Improving the flexural capacity of extrudable foamed concrete with glass-fiber bi-directional grid reinforcement: an experimental study10.1016/j.compstruct.2018.10.092 ↗
23. Laboratory tests of foam concrete slabs reinforced with composite grid10.1016/j.proeng.2017.06.222 ↗
24. Nano Modified Foam Concrete, CSIR-Structural Engineering Research Centre, Chennai
25. Thermal and electrical resistances of carbon nanotube-reinforced foamed concrete10.1166/nnl.2014.1724 ↗
26. Comprehensive performances of carbon nanotube reinforced foam concrete with ethyl silicate impregnation10.1016/j.conbuildmat.2016.11.105 ↗
27. Preparation and characterization of high porosity cement-based foam material10.1016/j.conbuildmat.2015.05.032 ↗
28. Experimental investigation on the mechanical strength and thermal conductivity of extrudable foamed concrete and preliminary views on its potential application in 3D printed multilayer insulating panels
29. Compressive and flexural strength of fiber-reinforced foamed concrete: effect of fiber content, curing conditions and dry density10.1016/j.conbuildmat.2018.11.197 ↗
30. Porosity and permeability of foamed concrete10.1016/S0008-8846(01)00490-2 ↗
31. Fracture energy of foamed concrete based on three-point bending test on notched beams10.1016/j.proeng.2015.06.157 ↗
32. Fracture behavior of lightweight foamed concrete: the crucial role of curing conditions10.1016/j.tafmec.2019.102297 ↗
33. Molecular simulation of water and chloride ion diffusion in nanopores of alkali-activated aluminosilicate structures10.1016/j.ceramint.2018.08.067 ↗
34. Permeable epoxy coating with reactive solvent for anticorrosion of concrete10.1016/j.porgcoat.2017.12.018 ↗
35. Influence of GGBS on durability and corrosion behavior of reinforced concrete10.1016/j.matchemphys.2005.03.043 ↗
36. Application of silane to improve durability of concretes with different age and moisture content
37. Influence of freeze-thaw cycles on properties of integral water repellent concrete10.1007/s11595-016-1458-9 ↗
38. The permeability of SO42- and Cl- in concrete under the effect of seepage flow and stress fields10.1016/j.conbuildmat.2017.12.071 ↗
39. Efficacy of surface hydrophobic agents in reducing water and chloride ion penetration in concrete10.1617/s11527-006-9218-5 ↗
40. Effect of hydrophobic surface treatment on freeze-thaw durability of concrete10.1016/j.cemconcomp.2016.03.001 ↗
41. The effect of silane-based hydrophobic admixture on corrosion of reinforcing steel in concrete10.1016/j.cemconres.2008.06.009 ↗
42. Effects of foaming agent type on the workability, drying shrinkage, frost resistance and pore distribution of foamed concrete10.1016/j.conbuildmat.2018.08.019 ↗
43. Shrinkage behavior of foam concrete10.1061/(ASCE)0899-1561(2009)21:11(631) ↗
44. Properties of foamed concrete containing water repellents10.1016/j.conbuildmat.2016.06.148 ↗
45. Hygrothermal properties of lightweight concrete: experiments and numerical fitting study10.1016/j.conbuildmat.2012.11.045 ↗
46. Properties and performance of silane: blended cement systems10.1617/s11527-012-9984-1 ↗
47. Investigation and modelling the effects of water proofing and water repellent admixtures dosage on the permeability and compressive strengths of concrete10.1016/j.conbuildmat.2016.03.110 ↗
48. Inexpensive and non-fluorinated superhydrophobic concrete coating for anti-icing and anti-corrosion10.1016/j.jcis.2019.01.014 ↗
49. The effect of water repellent surface impregnation on durability of cement-based materials
50. The durability characteristics of high performance concrete: a review10.1016/S0958-9465(02)00081-1 ↗
51. Pore structure analysis and properties evaluations of fly ash-based geopolymer foams by chemical foaming method10.1016/j.ceramint.2018.07.267 ↗
52. Prediction of convective transport within unsaturated concrete utilizing pore size distribution data10.1007/s10934-008-9245-4 ↗
53. Water-repellent properties of superhydrophobic and lubricant-infused “slippery” surfaces: a brief study on the functions and applications10.1021/acsami.5b07881 ↗
54. Hydrophobic treatment of concrete10.1016/S0950-0618(97)00046-9 ↗
55. Influence of silane-based water repellent on the durability properties of recycled aggregate concrete10.1016/j.cemconcomp.2012.08.008 ↗
56. Self-assembling particle-siloxane coatings for superhydrophobic concrete10.1021/am404272v ↗
57. Moisture evaluation of concrete pavement treated with hydrophobic surface impregnants
58. Hydrophobic concrete using waste paper sludge ash10.1016/j.cemconres.2015.01.005 ↗
59. Effect of water-repellent admixtures on the behaviour of aerial lime-based mortars10.1016/j.cemconres.2009.07.026 ↗
60. Highly effective water-repellent concrete with improved physical and technical properties10.1016/j.proeng.2015.07.143 ↗
61. Comparison between surface and bulk hydrophobic treatment against corrosion of galvanized reinforcing steel in concrete10.1016/j.cemconres.2011.03.011 ↗
62. Evaluation of capillary water absorption in rendering mortars made with powdered waterproofing additives10.1016/j.conbuildmat.2009.05.002 ↗
63. Sorption characteristics of foam concrete10.1016/j.cemconres.2007.05.010 ↗
64. Active iron-rich belite sulfoaluminate cements: clinkering and hydration10.1021/es101785n ↗
65. Sulfoaluminate-belite cement from low-calcium fly ash and sulfur-rich and other industrial by-products10.1016/S0008-8846(99)00072-1 ↗
66. Synthesis of belite cement from nano-silica extracted from two rice husk ashes10.1016/j.jenvman.2016.12.016 ↗
67. JG/T 266-2011 · 2011
68. GB/T 10294-2008 · 2008
69. Effect of hydrophobic admixture and recycled aggregate on physical – mechanical properties and durability aspects of no-fines concrete10.1016/j.conbuildmat.2014.05.043 ↗
70. Ding · 2011
71. Self-cleaning and depollution of fiber reinforced cement materials modified by neutral TiO2/SiO2 hydrosol photoactive coatings10.1016/j.apsusc.2013.12.171 ↗
72. Long-term durability of hydrophobic treatment on concrete10.1007/BF02699544 ↗