journal article·2020-01

Rapid and simultaneous determination of physical and chemical properties of asphalt by ATR-FTIR spectroscopy combined with a novel calibration-free method

Xiting Sun, Hongfu Yuan, Chunfeng Song, Xiaoxu Deng, Guanglong Lv, Xiaoyu Li, Aiqin Hu

Publisher page

Abstract

Abstract Determining wax content, softening point, and penetration of asphalt products by traditional methods is too time-consuming to meet the instant need in practice. Although infrared spectroscopy combined with multivariate calibration may realize rapid determination of asphalt, its modeling and maintenance are very labor-intensive and challenging. In this paper, a novel method combining attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) with a fast algorithm of spectrum representation (SR) was proposed to rapidly and expediently determine the properties. The proposed method achieves calibration-free, effectively overcoming the drawback of the modeling methods. The feasibility of the new method was demonstrated using 431 asphalt samples produced by different kinds of crude oil. The root mean standard error of prediction (RMSEP) of wax content, softening point, and penetration by SR method are 0.14%, 0.55 °C and 4.71 (0.1 mm), respectively. Each of them is below the reproducibility of corresponding standard test method. Moreover, the new method is compared with other two commonly used methods, partial least squares regression (PLS) and local modeling by densification (LMD), in detail. The results show that the new method not only can solve the disadvantages of PLS modeling effectively, but also is remarkably superior to LMD method, in repeatability and speed, and robustness for predicting the sample in the region with lower density and unreasonable distribution of the samples in data bank.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Spectroscopy and Chemometric Analyses · Water Quality Monitoring and Analysis · Spectroscopy Techniques in Biomedical and Chemical Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Chemical, thermal and rheological characteristics of composite polymerized asphalts10.1016/j.fuel.2018.04.100 ↗
2. Relation between bitumen chemistry and performance10.1016/j.fuel.2014.09.044 ↗
3. SH/T 0425-2003, Petroleum asphalt wax content determination method.
4. GB/T 4507-2014, Standard test method for softening point of bitumen (ring-and-ball apparatus).
5. GB/T 4509–2010, Standard test method for bitumen – determination of penetration.
6. Discriminating wavenumbers selection of ATR-FTIR spectra for identifying graded asphalt10.1016/j.conbuildmat.2019.04.068 ↗
7. Applications of Fourier transform infrared spectroscopy technologies on asphalt materials10.1016/j.measurement.2018.03.001 ↗
8. GC-MS identification of biomarkers in road asphalts and in their parent crude oils. Relationships between crude oil maturity and asphalt reactivity towards weathering10.1016/S0146-6380(96)00108-8 ↗
9. Effects of thermal oxidative ageing on dynamic viscosity, TG/DTG, DTA and FTIR of SBS- and SBS/sulfur-modified asphalts10.1016/j.conbuildmat.2010.06.048 ↗
10. Evaluation of RAP binder mobilisation and blending efficiency in bituminous mixtures: an approach using ATR-FTIR and artificial aggregate10.1016/j.conbuildmat.2018.05.154 ↗
11. Rapid ATR-FTIR methods for the quantification of bitumen property
12. A new attenuated total reflectance Fourier transform infrared spectroscopy method for the study of proteins in solution10.1006/abio.1997.2486 ↗
13. PLS-regression: a basic tool of chemometrics10.1016/S0169-7439(01)00155-1 ↗
14. Partial least-squares regression: a tutorial10.1016/0003-2670(86)80028-9 ↗
15. Nonlinear PLS modeling10.1016/0169-7439(89)80111-X ↗
16. Kernel PLS regression on wavelet transformed NIR spectra for prediction of sugar content of apple10.1016/j.chemolab.2006.07.001 ↗
17. A review of variable selection methods in partial least squares regression10.1016/j.chemolab.2012.07.010 ↗
18. An overview of variable selection methods in multivariate analysis of near-infrared spectra10.1016/j.trac.2019.01.018 ↗
19. Study on modifications of PLS approach for process monitoring10.3182/20110828-6-IT-1002.02876 ↗
20. A PLS model based on dominant factor for coal analysis using laser-induced breakdown spectroscopy10.1007/s00216-011-4865-y ↗
21. Multivariate analysis of remote laser-induced breakdown spectroscopy spectra using partial least squares, principal component analysis, and related techniques10.1016/j.sab.2008.10.045 ↗
22. An optimal selection method of samples of calibration set and validation set for spectral multivariate analysis
23. A novel ensemble L1 regularization based variable selection framework with an application in near infrared spectroscopy10.1016/j.chemolab.2017.01.020 ↗
24. GB/T 29858-2013, Standard guidelines for molecular spectroscopy multivariate calibration.
25. End-to-end quantitative analysis modeling of near-infrared spectroscopy based on convolutional neural network10.1002/cem.3122 ↗
26. Laser induced breakdown spectroscopy of composite samples: comparison of advanced chemometrics methods10.1021/ac051721p ↗
27. Quantitative analysis via near infrared databases: comparison analysis using restructured near infrared and constituent data-deux (CARNAC-D)10.1255/jnirs.712 ↗
28. The determination of red grape quality parameters using the LOCAL algorithm10.1255/jnirs.593 ↗
29. Rapid determination of physical and chemical parameters of reformed gasoline by near-infrared (NIR) spectroscopy combined with the Monte Carlo virtual spectrum identification method10.1021/acs.energyfuels.8b00854 ↗
30. Determination of multi-properties of residual oils using mid-infrared attenuated total reflection spectroscopy10.1016/j.fuel.2006.02.003 ↗
31. D.C. Lambert, Martens A. Method for optimizing control of a production unit: U.S. Patent 5,490,085. 1996-2-6.
32. D.C. Lambert, C. Saint Martin, M. Sanchez, et al. Method for optimising a mixture of components by means of spectral analysis: U.S. Patent Application 15/318,626. 2017-8-31.
33. D.C. Lambert, C. Saint Martin, M. Sanchez, et al. Method of preparing a certified target product from a mixture of components by spectral analysis: U.S. Patent Application 15/318,623. 2017-5-11.
34. [11] P1 TOPNIR systems for on-line optimisation of petrochemical and refining processes
35. Representation learning: a review and new perspectives10.1109/TPAMI.2013.50 ↗
36. A survey on representation-based classification and detection in hyperspectral remote sensing imagery10.1016/j.patrec.2015.09.010 ↗
37. LibPLS: an integrated library for partial least squares regression and discriminant analysis10.1016/j.chemolab.2018.03.003 ↗
38. Identification of asphalt fingerprints based on ATR-FTIR spectroscopy and principal component-linear discriminant analysis10.1016/j.conbuildmat.2018.12.009 ↗
39. Principal component analysis10.1016/0169-7439(87)80084-9 ↗
40. Computer aided design of experiments10.1080/00401706.1969.10490666 ↗
41. Partial least-squares methods for spectral analyses. 1. Relation to other quantitative calibration methods and the extraction of qualitative information10.1021/ac00162a020 ↗
42. The identification of highly similar crude oils by infrared spectroscopy combined with pattern recognition method10.1016/j.saa.2013.03.079 ↗
43. Dual learning-based online ensemble regression approach for adaptive soft sensor modeling of nonlinear time-varying processes10.1016/j.chemolab.2016.01.009 ↗