Electrical resistivity and capillary absorption in mortar with styrene-acrylic emulsion and air-entrained agent: improvement and correlation with pore structure
Source abstract
Abstract
Abstract In realistic situation, the uptake of water through capillary absorption process substantially decrease the bulk electrical resistivity. Pore structure is vital to both the bulk electrical resistivity and the capillary absorption process. In this study, to improve the bulk electrical resistivity and mitigate the capillary absorption, styrene-acrylic emulsion (SAE) and air-entrained agent (AE) were incorporated into the mortar sample to modify the pore structure. The evolution of bulk electrical resistivity during the capillary absorption process was investigated. Results showed that the evolution of bulk electrical resistivity exhibits a periodic change along with the water absorption process. The addition of 6% SAE executes a significant improvement on both bulk electrical resistivity and sorptivity coefficient. To reveal the underlying mechanism, the evolution of electrical resistivity of pore solution and porosity was estimated and measured by a theoretical method and mercury intrusion porosimetry (MIP). Characteristic values of pore structure including tortuosity and connectivity were deduced from models. These obtained values indicated that the tortuosity or connectivity exerts a greater influence on the bulk electrical resistivity compared to porosity. No evident relationship between pore structure and sorptivity coefficient was observed via the conventional Lucas-Washburn model. To integrate the effect of the characteristic parameters of pore structure on the capillary absorption, a fractal model was established. The alternations of SAE and AE on the pore structure were manifested into the change of tortuosity fractal dimension and pore fractal dimension. The sorptivity coefficient calculated from this proposed model is in good agreement with the experimental value.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Geophysical and Geoelectrical Methods · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Effect of current distribution on corrosion rate measurements in reinforced concrete10.5006/1.3293581 ↗
2. Measurement of concrete resistivity for assessment of corrosion
3. Relationship between concrete resistivity and corrosion rate – A literature review10.1016/j.cemconcomp.2013.03.019 ↗
4. Characterizing blended cement pastes under cyclic freeze–thaw actions by electrical resistivity10.1016/j.conbuildmat.2013.02.042 ↗
5. Use of electrical resistivity as an indicator for durability10.1016/j.conbuildmat.2014.09.077 ↗
6. Gas permeability and electrical conductivity of structural concretes: Impact of pore structure and pore saturation10.1016/j.cemconres.2016.08.009 ↗
7. Concrete tie track system
8. Szeliga · 1994 · 300
9. Insulating a precast concrete crossing with elastomeric rail enclosure
10. Zhao · 2006
11. . Schwalm, J. Sandor, Stray current--the major cause of underground plant corrosion, L.H. Schwalm, J.G. Sandor, Stray Current Corrosion-The Past, Present, and Future of Rail Transit Systems, Paper (4), 1994.
12. Effects of grounding schemes on rail potential and stray currents in Taipei rail transit systems10.1049/ip-epa:20010280 ↗
13. A.M. Neville, Properties of concrete, 2011.
14. A new model for the electrical conductivity of cement-based material by considering pore size distribution10.1680/jmacr.16.00535 ↗
15. Investigation of the capillary rise in cement-based materials by using electrical resistivity measurement10.1016/j.conbuildmat.2018.02.155 ↗
16. P. Mehta, P.J.K. Mehta, P.J. Monteiro, Concrete: microstructure, properties, and materials, 2006.
17. Masoodi · 2012
18. Hall · 2011
19. Electrical resistivity of concrete-a literature review
20. Electrical conductivity of drying cement paste10.1617/s11527-006-9211-z ↗
21. The review of pore structure evaluation in cementitious materials by electrical methods10.1016/j.conbuildmat.2016.05.037 ↗
22. Determining porosity and pore network connectivity of cement-based materials by a modified non-contact electrical resistivity measurement: Experiment and theory10.1016/j.matdes.2018.06.045 ↗
23. Formation factor of fresh cementitious pastes10.1016/j.cemconcomp.2018.05.011 ↗
24. Polymer-modified concrete10.1061/(ASCE)0899-1561(1997)9:2(85) ↗
25. Properties of polymer-modified mortars using epoxy and acrylic emulsions10.1016/j.conbuildmat.2005.08.007 ↗
26. Visualization of water penetration in cementitious materials with superabsorbent polymers by means of neutron radiography10.1016/j.cemconres.2012.05.005 ↗
27. Effect of polymer modified cementitious coatings on water and chloride permeability in concrete10.1016/j.conbuildmat.2013.08.050 ↗
28. Relationship between liquid sorptivity and capillarity in concrete10.1016/S0008-8846(03)00070-X ↗
29. Effect of entrained air voids on the microstructure and mass transport properties of concrete10.1016/j.cemconres.2011.06.013 ↗
30. Influence of polymer on cement hydration in SBR-modified cement pastes10.1016/j.cemconres.2006.05.020 ↗
31. F. Wenner, A method of measuring earth resistivity, US Government Printing Office, 1916.10.6028/bulletin.282 ↗
32. Capillary imbibition in mortars with natural pozzolan, limestone powder and slag evaluated through neutron radiography, electrical conductivity, and gravimetric analysis10.1016/j.cemconres.2019.02.011 ↗
33. Pore structure of cement pastes through NAD and MIP analysis10.1680/adcr.14.00109 ↗
34. Analysis of pore structure, contact angle and pore entrapment of blended cement pastes from mercury porosimetry data10.1016/j.cemconcomp.2012.06.005 ↗
35. Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and application10.1007/s10934-013-9765-4 ↗
36. Pore structure characterization of cement pastes blended with high-volume fly-ash10.1016/j.cemconres.2011.09.012 ↗
37. Estimating the electrical conductivity of cement paste pore solutions from OH−, K+ and Na+ concentrations10.1016/S0008-8846(02)01068-2 ↗
38. Electrical conductivity, diffusion, and permeability of Portland cement-based mortars10.1016/S0008-8846(00)00281-7 ↗
39. The pore solution of blended cements: a review10.1617/s11527-015-0724-1 ↗
40. The electrical resistivity log as an aid in determining some reservoir characteristics10.2118/942054-G ↗
41. On the relationship between porosity and electrical resistivity in cementitious systems10.1016/0008-8846(96)00017-8 ↗
42. The effect of water saturation degree on the electrical properties of cement-based porous material10.1016/j.cemconcomp.2016.03.008 ↗
43. Using a saturation function to interpret the electrical properties of partially saturated concrete10.1061/(ASCE)MT.1943-5533.0000549 ↗
44. A novel pore structure tortuosity concept based on nitrogen sorption hysteresis data10.1021/ie000626y ↗
45. Rajabipour · 2006
46. Aligizaki · 2005
47. Rate of capillary ascension of liquids10.1007/BF01461107 ↗
48. The dynamics of capillary flow10.1103/PhysRev.17.273 ↗
49. A discussion of the effect of tortuosity on the capillary imbibition in porous media10.1007/s11242-011-9767-0 ↗
50. Predicting the capillary imbibition of porous rocks from microstructure10.1023/A:1016047122877 ↗
51. Fractal analysis of fracture increasing spontaneous imbibition in porous media with gas-saturated10.1142/S0129183113500563 ↗
52. Some fractal characters of porous media10.1142/S0218348X01000804 ↗
53. On the physical properties of apparent two-phase fractal porous media10.2136/vzj2008.0015 ↗
54. A fractal permeability model for bi-dispersed porous media10.1016/S0017-9310(02)00014-5 ↗
55. An explanation of scale-dependent dispersivity in heterogeneous aquifers using concepts of fractal geometry10.1029/WR024i004p00566 ↗
56. Fractal characterization of pore system evolution in cementitious materials10.1007/s12205-013-0320-2 ↗
57. Determination of the surface fractal dimension for porous media by mercury porosimetry10.1021/ie00043a044 ↗
58. Transport properties of saturated and unsaturated porous fractal materials10.1103/PhysRevLett.100.035504 ↗
59. An electrical conductivity model for fractal porous media10.1002/2015GL064460 ↗