The use of geogrid reinforcement for enhancing the performance of concrete overlays: An experimental and numerical assessment
Source abstract
Abstract
Abstract The use of thin concrete overlays as a rehabilitation option of existing distressed pavements is, similar to other overlay options, prone to the phenomenon of reflective cracking. Being a thin layer, consisting of thin Portland cement concrete (PCC), and lacking reinforcement allows the cracks in existing pavements to propagate through the concrete due to the horizontal and vertical movement of the underlying layer. This study investigates the use of geogrids as a reinforcement-crack arresting layer in thin concrete overlays to enhance their performance by: (1) providing additional tensile strength, (2) ductility, and more importantly: (3) controlling crack propagation to mitigate reflective cracking. Two experimental setups are utilized to assess and quantify the effect of inclusion of the geogrids for mode I cracking: the direct tension test to simulate thermal loads, and the flexure test to simulate the traffic loads. The outcomes from these experiments are then used to calibrate finite element models simulating the behavior of geogrid reinforced overlays under the above conditions. The FEM models are used to study the sensitivity of varying the location of the geogrid reinforcement. The obtained results verify that the use of geogrid reinforcement significantly enhances the overlay performance in the post-cracking regime in terms of strength, ductility and mode of failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geotechnical Engineering and Underground Structures · Geotechnical Engineering and Soil Stabilization · Landfill Environmental Impact Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Taylor · 2007
2. Evaluation of reflective cracking in pavements using a new procedure that combine loads with different frequencies10.1016/j.conbuildmat.2014.11.030 ↗
3. CAM and SMA mixtures to delay reflective cracking on PCC pavements10.1016/j.conbuildmat.2015.08.020 ↗
4. Al-Qadi · 2008
5. Effects of geosynthetic reinforcement on the propagation of reflection cracking in asphalt overlays
6. De Bondt · 1998
7. Analysis of reflective crack control system involving reinforcing grid over based-isolating interlayer mixture10.1061/(ASCE)0733-947X(2002)128:4(375) ↗
8. Geosynthetics materials and applications for soil reinforcement and environmental protection works
9. Maxwell · 2005
10. Koerner · 1994
11. Zornberg · 2008
12. Experimental studies on viability of using geosynthetics as fibers in concrete
13. Mechanical damage evaluation of geosynthetics fibres used as anti-reflective cracking systems in asphalt pavements10.1016/j.conbuildmat.2016.01.057 ↗
14. Influence of geosynthetic type on retarding cracking in asphalt pavements10.1016/j.conbuildmat.2014.12.034 ↗
15. Geogrid base reinforcement with aggregate interlock and modeling of associated stiffness enhancement in mechanistic pavement analysis10.3141/2116-12 ↗
16. Improvement of flexible pavement with use of geogrid
17. Guo · 1993
18. Laboratory study of geogrid reinforcement in Portland cement concrete
19. Flexural behavior of concrete beams reinforced with different types of geogrids10.1061/(ASCE)MT.1943-5533.0000920 ↗
20. Direct tension test and tensile strain capacity of concrete at early age10.1016/S0008-8846(03)00231-X ↗
21. Direct tension test of concrete
22. Direct tensile fatigue of concrete by the use of friction grips
23. Determining tensile properties of mass concrete by direct tensile test
24. ADINA · 2012