Application of ASR tests to recycled concrete aggregates: Influence of water absorption
Source abstract
Abstract
Abstract Concrete is one of the most abundant construction and demolition wastes. It can be crushed to produce Recycled Concrete Aggregates (RCA) that can eventually be recycled for the manufacture of new concrete. However, the presence of adherent cement paste leads to higher alkalis content in these aggregates that could increase the risk to observe Alkali Silica Reaction (ASR). Moreover, the origin of natural aggregates in the RCA is generally unknown and these aggregates can potentially be reactive concerning ASR. Among standards which qualify the risk of ASR for natural aggregates, two main tests are used in this paper to evaluate the risk of ASR of RCA: tests on mortars and tests on microbars. In these tests, the water absorption of aggregates is not taken into consideration for the effective water calculation. However, in the case of absorbing aggregates like RCA, absorption water cannot be neglected. It could change significantly the effective water to cement ratio, and then influence the measured expansion. The first aim of this paper is to study the influences of absorption water and initial saturation state of RCA on the expansion of mortars and microbars. The second objective is to propose a new simple method for the assessment of water absorption coefficient of the fine granular fraction 0.16/0.63 mm used for the manufacture of microbars. It is shown that absorption water has a strong influence on the expansion of mortars and microbars made with RCA, and that it has to be taken into account in the composition of the mixes. The initial state of saturation of RCA is less influential. The proposed method for the water absorption coefficient determination of fraction 0.16/0.63 mm is based on the correlation between water absorption and cement paste content. The estimation of the latter from the mass loss between 105 and 475 °C for two fractions of RCA, allows for an accurate determination of the water absorption coefficient of the fine fraction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Use of aggregates from recycled construction and demolition waste in concrete10.1016/j.resconrec.2006.05.010 ↗
2. Estimation and forecasting of concrete debris amount in China10.1016/j.resconrec.2006.03.011 ↗
3. Strength of recycled concrete made from crushed concrete coarse aggregate
4. Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete10.1016/j.cemconres.2007.02.002 ↗
5. Influence of fine recycled concrete aggregates on the properties of mortars10.1016/j.conbuildmat.2015.02.037 ↗
6. Using fine recycled concrete aggregate for mortar production10.1590/S1516-14392013005000164 ↗
7. Properties of concretes produced with waste concrete aggregate10.1016/j.cemconres.2003.12.019 ↗
8. Properties of concrete made with recycled aggregate from partially hydrated old concrete10.1016/S0008-8846(02)01033-5 ↗
9. Influence of hardened cement paste content on the water absorption of fine recycled concrete aggregates
10. Fresh behavior of mortar based on recycled sand – influence of moisture condition10.1016/j.conbuildmat.2015.12.071 ↗
11. Influence of recycled aggregate on interfacial transition zone, strength, chloride penetration and carbonation of concrete10.1061/(ASCE)0899-1561(2003)15:5(443) ↗
12. Carbonation behaviour of recycled aggregate concrete10.1016/j.cemconcomp.2015.04.017 ↗
13. Performance of recycled concretes exposed to sulphate soil for 10 years10.1016/j.conbuildmat.2015.11.025 ↗
14. Effects of internal curing on the strength, drying shrinkage and freeze–thaw resistance of concrete containing recycled concrete aggregates10.1016/j.conbuildmat.2015.05.045 ↗
15. Evaluating the effect of recycled aggregate on damaging AAR in concrete10.1680/macr.14.00260 ↗
16. Reactivity of reclaimed concrete aggregate produced from concrete affected by alkali-silica reaction10.1016/j.cemconres.2009.08.008 ↗
17. Alkali-silica reaction in concrete induced by mortar adhered to recycled aggregate10.3989/mc.2010.46508 ↗
18. Mitigating alkali-silica reaction in concrete containing recycled concrete aggregate10.1177/0361198106197900105 ↗
19. A simple staining technique for the identification of alkali-silica gel in concrete and aggregate10.1016/0008-8846(88)90128-7 ↗
20. The chemistry of ‘alkali-aggregate’ reaction10.1016/0008-8846(81)90003-X ↗
21. Characterization of the ASR rim10.1016/S0008-8846(02)00765-2 ↗
22. Alkali–silica reaction: current understanding of the reaction mechanisms and the knowledge gaps10.1016/j.cemconres.2015.05.024 ↗
23. ASR pessimum behaviour of siliceous limestone aggregates10.1016/j.cemconres.2009.08.011 ↗
24. Classification of alkali–silica reaction damage using acoustic emission: a proof-of-concept study10.1016/j.conbuildmat.2015.07.093 ↗
25. AFNOR, Norme FD P18–464: Bétons – Dispositions pour prévenir les phénomènes d’alcali-réaction, avril-2014.
26. AFNOR, Norme NF P18–594 : Granulats – Méthodes d’essai de réactivité aux alcalis, juillet-2015.
27. AFNOR, Norme FD P18–542: Granulats – Critères de qualification des granulats naturels pour béton hydraulique vis-à-vis de l’alcali-réaction, juin-2015.
28. AFNOR, Norme NF EN 1097–6: Essais pour déterminer les caractéristiques mécaniques et physiques des granulats, janvier-2014.
29. IFSTTAR, Test Method No. 78:2011, Tests on aggregates for concrete: measurement of total water absorption by a crushed sand, Paris, 2011.