Recent research on cold-formed steel beams and columns subjected to elevated temperature: A review
Source abstract
Abstract
Abstract CFS members are more vulnerable to fire due to high section factor (fire-exposed area to the heated volume). Hence, an extensive review of experimental and numerical studies performed on CFS beams and columns at elevated temperatures is presented. Various types of buckling under different loading conditions and influence of different factors affecting the ultimate capacity and critical temperature of members are discussed. A comparison between different test methods and fire curves used around the world is presented. The research gaps as well as recommendations are also proposed. Conclusively, this review will provide basic data for the development of design codes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Cold-formed steel columns made with open cross-sections subjected to fire10.1016/j.tws.2014.07.020 ↗
2. Thin-walled timber structures: an investigation10.1016/j.conbuildmat.2014.09.070 ↗
3. Full-scale fire testing and numerical modelling of the transient thermo-mechanical behaviour of steel-stud gypsum board partition walls10.1016/j.conbuildmat.2014.02.027 ↗
4. Materials properties of thick-wall cold-rolled welded tube with a rectangular or square hollow section10.1016/j.conbuildmat.2010.12.019 ↗
5. LaBoube · 2008 · 268
6. AISI · 2012
7. Cold-formed steel member bending stiffness prediction10.1016/j.jcsr.2015.07.004 ↗
8. Review: development of performance-based fire design for cold-formed steel10.1186/s40038-014-0001-3 ↗
9. Cold-formed steel stud-plank system for mid-rise construction
10. On the strength and DSM design of cold-formed steel web/flange-stiffened lipped channel columns buckling and failing in distortional modes10.1016/j.tws.2016.03.023 ↗
11. Elevated temperature material properties of stainless steel reinforcing bar10.1016/j.conbuildmat.2016.04.009 ↗
12. New developments in use of cold formed steel in buildings10.1016/0950-0618(92)90038-Z ↗
13. Yu · 1973
14. The strength and performance of cold formed steel purlins10.1016/0950-0618(88)90002-5 ↗
15. M. Nowak, Strength of Steel – The Case for Cost-Efficient Sustainable Construction. , 2011).
16. G. Winter, Light gauge (thin-walled) steel structures for building in the USA Preliminary publication, in: 4th Congress of the International Association for Bridge and Engineering, 1952, p. 524.
17. Comparative experimental study of hot-rolled and cold-formed rectangular hollow sections10.1016/j.tws.2010.02.003 ↗
18. Eurocode, 1-2 · 1993
19. de Normalización · 2005
20. Mechanical properties of structural steel at elevated temperatures and after cooling down10.1002/fam.849 ↗
21. Experimental Investigation of Cold-formed Steel (CFS) Channel Material at Post Elevated Temperature
22. Distortional failure and DSM design of cold-formed steel lipped channel beams under elevated temperatures10.1016/j.tws.2015.06.004 ↗
23. Purkiss · 2013
24. Review of the high temperature mechanical and thermal properties of the steels used in cold formed steel structures–The case of the S280 Gd+ Z steel10.1016/j.tws.2015.06.002 ↗
25. Mechanical properties of cold-formed steels at elevated temperatures10.1016/j.tws.2010.08.004 ↗
26. Experimental investigation of the mechanical properties of ZAR-345 cold-formed steel at elevated temperatures10.1590/1516-1439.297014 ↗
27. Mechanical properties of ultra-high strength (Grade 1200) steel tubes under cooling phase of a fire: an experimental investigation10.1016/j.conbuildmat.2015.05.082 ↗
28. Behavior of high strength structural steel at elevated temperatures10.1061/(ASCE)0733-9445(2006)132:12(1948) ↗
29. An introduction to the mechanical properties of structural steel at elevated temperatures10.1016/0379-7112(88)90032-X ↗
30. Flexural buckling of fire exposed aluminium columns10.1016/j.firesaf.2009.02.002 ↗
31. Mechanical properties of structural steels at high temperatures and after cooling down
32. Stress–strain curves for stainless steel at elevated temperatures10.1016/j.engstruct.2005.07.005 ↗
33. Calculation of the heating rate of an unprotected steel member in a standard fire resistance test10.1016/S0379-7112(96)00016-1 ↗
34. Standard · 1999
35. Fire resistance of thin-walled cold-formed steel structures
36. Cheng · 2015
37. Thermal buckling analysis of axially loaded columns of thin-walled open section with nonuniform sectional properties
38. Damage mechanisms in cementitious coatings on steel members under axial loading10.1016/j.conbuildmat.2015.04.025 ↗
39. Effective properties of spray-applied fire-resistive material for resistance to cracking and delamination from steel structures10.1016/j.conbuildmat.2015.03.022 ↗
40. Fracture behaviour and microstructural evolution of structural mild steel under the multi-hazard loading of high-strain-rate load followed by elevated temperature10.1016/j.conbuildmat.2016.06.122 ↗
41. Mechanical properties of cyclically-damaged structural mild steel at elevated temperatures10.1016/j.conbuildmat.2013.11.042 ↗
42. The behaviour and design of cold-formed purlins
43. Lateral-torsional buckling of steel I-beams retrofitted by bonded and un-bonded CFRP laminates with different pre-stress levels: experimental and numerical study10.1016/j.conbuildmat.2014.11.070 ↗
44. Shedquarters, Structural Products. , 2009.
45. Martins · 2015 · 38
46. A new proposal of a simple model for the lateral-torsional buckling of unrestrained steel I-beams in case of fire: experimental and numerical validation10.1016/S0143-974X(02)00023-8 ↗
47. Performance of unprotected and protected cellular beams in fire conditions10.1016/j.conbuildmat.2015.12.150 ↗
48. Tests on intumescent paints for fire protection of existing steel structures10.1016/j.conbuildmat.2016.05.144 ↗
49. The lateral-torsional buckling of unrestrained steel beams in fire10.1016/0143-974X(95)00014-M ↗
50. Vila Real · 1999
51. Lateral torsional buckling of steel I-beams in case of fire-numerical modeling
52. Numerical modeling of lateral-torsional buckling of steel I-beams under fire conditions—comparison with Eurocode 310.1106/2XG3-4AFQ-ARP5-0PMM ↗
53. Numerical simulations of the effects of non-uniform temperature distributions on lateral torsional buckling resistance of steel I-beams10.1016/S0143-974X(03)00003-8 ↗
54. The effect of residual stresses in the lateral-torsional buckling of steel I-beams at elevated temperature10.1016/S0143-974X(03)00143-3 ↗
55. Proposed design methods for lateral torsional buckling of unrestrained steel beams in fire10.1016/j.jcsr.2006.09.008 ↗
56. The lateral torsional buckling strength of cold-formed stainless steel beams
57. N. Lopes, P. Vila Real, L. Simoes da Silva, J.-M. Franssen, Proposal to the Eurocode 3 for the lateral-torsional buckling of stainless steel I-beams in case of fire, 4th International Workshop Structures in Fire, 2006, pp. 127–137.
58. Lateral–torsional buckling of stainless steel I-beams in case of fire10.1016/j.jcsr.2008.04.013 ↗
59. Experimental and numerical studies on lateral-torsional buckling of GJ structural steel beams under a concentrated loading condition
60. Distortional buckling tests on cold-formed steel beams10.1061/(ASCE)0733-9445(2006)132:4(515) ↗
61. Lateral–torsional buckling of cold-formed zed-purlins partial-laterally restrained by metal sheeting10.1016/j.tws.2004.03.005 ↗
62. Behaviour and design of cold-formed steel beams subject to lateral–torsional buckling10.1016/j.tws.2011.10.012 ↗
63. Behaviour and design of cold-formed steel beams subject to lateral–torsional buckling at elevated temperatures10.1016/j.tws.2012.05.009 ↗
64. Dolamune Kankanamge · 2008
65. Kankanamge · 2010
66. Elevated temperature mechanical properties of hollow flange channel sections10.1016/j.conbuildmat.2015.03.107 ↗
67. AS/NZS · 2005
68. Numerical simulation of catenary action in cold-formed steel sheeting in fire
69. Outinen · 2001
70. Local/distortional mode interaction in cold-formed steel lipped channel beams10.1016/j.tws.2010.01.005 ↗
71. Local and distortional buckling of cold-formed steel beams with edge-stiffened flanges10.1016/j.jcsr.2012.01.006 ↗
72. Tests of cold-formed channels with local and distortional buckling10.1061/(ASCE)0733-9445(1992)118:7(1786) ↗
73. Strength design curves for thin-walled sections undergoing distortional buckling10.1016/0143-974X(94)90009-4 ↗
74. G. Newman, Cardington fire tests, in: 1999 North American Steel Construction Conference (NASCC), 1999, p. 28.
75. A. Weller, Broadgate Phase 8: Fire, 22 June 1990, Summary Report of Damage and Repair, Building Research Establishment PD 21, 1992, p. 92.
76. Y. Wang, D. Moore, The effect of frame continuity on the critical temperature of steel columns, in: Third Kenrensky Conference on Global Trends in Structural Engineering, Singapore, 1994, pp. 681–686.
77. Computer modelling of the corner compartment fire test on the large-scale Cardington test frame10.1016/S0143-974X(97)00078-3 ↗
78. The influence of the thermal expansion of beams on the structural behaviour of columns in steel-framed structures during a fire10.1016/S0141-0296(99)00028-0 ↗
79. Fire resistance of steel columns with elastically restrained axial elongation and bending10.1016/S0143-974X(99)00033-4 ↗
80. Failure temperature of a system comprising a restrained column submitted to fire10.1016/S0379-7112(99)00047-8 ↗
81. A simplified calculation method for fire design of steel columns with restrained thermal elongation10.1016/j.compstruc.2012.09.006 ↗
82. Structural performance of rotationally restrained steel columns in fire10.1016/S0379-7112(01)00017-0 ↗
83. L. Laím, J.P. Rodrigues, L.S. da Silva, Numerical analysis of cold-formed steel beams in fire, in: Proceedings of the 13th International Conference and Exhibition on Fire and Materials, San Francisco, USA, 2013, pp. 163–174.
84. Experimental analysis on cold-formed steel beams subjected to fire10.1016/j.tws.2013.09.006 ↗
85. Flexural behaviour of beams made of cold-formed steel sigma-shaped sections at ambient and fire conditions10.1016/j.tws.2014.11.004 ↗
86. Laím · 2013 · 133
87. Experimental and numerical analysis on the structural behaviour of cold-formed steel beams10.1016/j.tws.2013.06.008 ↗
88. Flexural behaviour of axially and rotationally restrained cold-formed steel beams subjected to fire10.1016/j.tws.2015.03.010 ↗
89. Numerical analysis on axially-and-rotationally restrained cold-formed steel beams subjected to fire10.1016/j.tws.2016.03.004 ↗
90. Nondestructive test methods for concrete bridges: A review10.1016/j.conbuildmat.2015.12.011 ↗
91. Effects of post-fire curing conditions on the restoration of material properties of fire-damaged concrete10.1016/j.conbuildmat.2015.09.015 ↗
92. Wastney · 2002
93. Developments and advanced applications of concrete-filled steel tubular (CFST) structures: members10.1016/j.jcsr.2014.04.016 ↗
94. Local, distortional, and Euler buckling of thin-walled columns10.1061/(ASCE)0733-9445(2002)128:3(289) ↗
95. Numerical investigation and direct strength design of cold-formed steel lipped channel columns experiencing local–distortional–global interaction10.1016/j.tws.2016.03.025 ↗
96. C.G.Q.S.P. Rack, Industrial Pallet Racks and Double Deep Pallet Rack International Trade Site. , 2016.
97. Heva · 2009
98. Flexural-torsional buckling tests of cold-formed steel compression members at elevated temperatures10.12989/scs.2013.14.3.205 ↗
99. S. Gunalan, Y. Bandula Heva, M. Mahendran, Design of cold-formed steel columns at elevated temperatures subject to flexural-torsional buckling, in: Proceedings of the 7th European Conference on Steel and Composite Structures, 2014.10.1016/j.tws.2013.06.013 ↗
100. Flexural–torsional buckling behaviour and design of cold-formed steel compression members at elevated temperatures10.1016/j.engstruct.2014.07.036 ↗