journal article·2018-03

Influence of slag composition on cracking potential of slag-portland cement concrete

Ananya Markandeya, Natallia Shanahan, Dhanushika Mapa Gunatilake, Kyle A. Riding, A. Zayed

Publisher page

Abstract

Abstract Semi-adiabatic calorimetry and a rigid cracking frame were used to compare the effects of five different ground granulated blast-furnace slags with variable Al2O3 and MgO contents, but similar CaO/SiO2 ratios on early-age cracking resistance. While cement replacement with slag significantly reduced concrete temperature rise and delayed the time of cracking compared to the plain concrete, it was observed that stress development varied with the MgO/Al2O3 ratio of the slag. Increasing this ratio reduced the cracking temperature and delayed the time of cracking. The worst performance of the low MgO/Al2O3 ratio slag was attributed to its higher early-age reactivity, which was confirmed by isothermal calorimetry in addition to its higher autogenous shrinkage assessed by free shrinkage measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. ACI Committee 207, ACI 207.2R-07 Report on Thermal and Volume Change Effects on Cracking of Mass Concrete, American Concrete Institute, Farmington Hills, MI, 2007.
2. Influence of Al2O3 content on hydraulic reactivity of granulated blast-furnace slag, and the interaction between Al2O3 and CaO10.1680/adcr.2004.16.1.1 ↗
3. The role of the alumina content of slag, plus the presence of additional sulfate on the hydration and microstructure of Portland cement-slag blends10.1016/j.cemconres.2014.07.018 ↗
4. Early stage hydration of slag-cement10.1016/0008-8846(83)90111-4 ↗
5. The effects of supplementary cementing materials in modifying the heat of hydration of concrete10.1617/s11527-008-9425-3 ↗
6. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag—Part II: effect of Al2O310.1016/j.cemconres.2011.08.005 ↗
7. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag—Part I: effect of MgO10.1016/j.cemconres.2011.05.002 ↗
8. Supplementary cementitious materials10.2138/rmg.2012.74.6 ↗
9. M. Juenger, J.L. Provis, J. Elsen, W. Matthes, R.D. Hooton, J. Duchesne, L. Courard, H. He, F. Michel, R. Snellings, N. De Belie, Supplementary Cementitious Materials for Concrete: Characterization Needs, MRS Proc. 1488 (2012) imrc12-1488-7b-026. doi:10.1557/opl.2012.1536.10.1557/opl.2012.1536 ↗
10. M. Moranville-Regourd, Cements made from blastfurnace slag, in: P.C. Hewlett (Ed.), Lea’s Chem. Cem. Concr., 4th ed., Arnold, 1998, pp. 633–674.10.1016/B978-075066256-7/50023-0 ↗
11. R. Springenschmid, R. Breitenbücher, M. Mangold, Development of the Cracking frame and the temperature-stress testing machine, in: R. Springenschmid (Ed.), RILEM Proc. 25, Therm. Crack. Concr. Early Ages, E & FN Spon, London, UK, 1994, pp. 137–144.
12. Effects of construction time and coarse aggregate on bridge deck cracking
13. Effects of chloride and chloride-free accelerators combined with typical admixtures on the early-age cracking risk of concrete repair slabs10.1016/j.conbuildmat.2015.07.003 ↗
14. Early-age cracking tendency and ultimate degree of hydration of internally cured concrete10.1061/(ASCE)MT.1943-5533.0000469 ↗
15. Cracking tendency of bridge deck concrete10.3141/2164-16 ↗
16. Early age cracking: a case study in how materials modeling can improve concrete quality
17. Quantification of effects of fly ash type on concrete early-age cracking
18. Cracking potential and temperature sensitivity of metakaolin concrete10.1016/j.conbuildmat.2016.05.087 ↗
19. Early-age strain-stress relationship and cracking behavior of slag cement mixtures subject to constant uniaxial restraint10.1016/j.conbuildmat.2013.08.061 ↗
20. Effect of autogenous deformation on the cracking risk of slag cement concretes10.1016/j.cemconcomp.2010.12.003 ↗
21. Statistical determination of cracking probability for mass concrete10.1061/(ASCE)MT.1943-5533.0000947 ↗
22. ASTM C989/C989M-14, Standard Specification for Slag Cement for Use in Concrete and Mortars, in: ASTM International, West Conshohocken, PA, 2014.
23. ASTM C114-13, Standard Test Method for Chemical Analysis of Hydraulic Cement, ASTM International, West Conshohocken, Pa., 2013.
24. D. Bish, R.J. Reynolds, Sample Preparation for X-Ray Diffraction, in: D. Bish, J. Post (Eds.), Mod. Powder Diffr., The Mineralogical Society of America, Washington, DC, 1989, pp. 73–99.10.1515/9781501509018-007 ↗
25. Application of the rietveld refinement procedure in assaying powdered mixtures10.1017/S0885715600013026 ↗
26. Does ordinary portland cement contain amorphous phase? a quantitative study using an external standard method10.1154/1.3549186 ↗
27. Rietveld quantitative phase analysis of OPC clinkers, cements and hydration products10.2138/rmg.2012.74.5 ↗
28. Description and survey of methodologies for the determination of amorphous content via X-ray powder diffraction10.1524/zkri.2011.1437 ↗
29. ASTM C204-16, Standard Test Method for Fineness of Hydraulic Cement by Air Permeability Apparatus, ASTM International, West Conshohocken, Pa., Pa., 2016.
30. Physical characterization methods for supplementary cementitious materials10.1617/s11527-014-0430-4 ↗
31. Determination of particle size, surface area, and shape of supplementary cementitious materials by different techniques10.1617/s11527-014-0431-3 ↗
32. ASTM Standard C1072 2009a, Standard Test Method for Measurement for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry, ASTM International, West Conshohocken, Pa., 2012.
33. ASTM Standard C192/192M 2007, Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM International, West Conshohocken, Pa., 2010.
34. RILEM TCE1: Adiabatic and semi-adiabatic calorimetry to determine the temperature increase in concrete due to hydration heat of the cement
35. Buidens · 2014
36. ASTM Standard C403/C403M-08, Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance, in: ASTM International, West Conshohocken, PA, 2014.
37. A discussion on, “The use of nitrogen adsorption to assess the microstructure of cement paste” by MCG Juenger and HM Jennings10.1016/S0008-8846(01)00742-6 ↗
38. Pore size determination in modified micro- and mesoporous materials. Pitfalls and limitations in gas adsorption data analysis10.1016/S1387-1811(03)00339-1 ↗
39. Pore structures of hydrated calcium silicates and Portland cements by nitrogen adsorption10.1016/0021-9797(70)90219-5 ↗
40. R. Springenschmid, R. Breitenbücher, Influence of Constituents mix proportions and temperature on cracking sensitivity of concrete, in: R. Springenschmid (Ed.), RILEM Rep. 15 Prev. Therm. Crack. Concr. Early Ages, E & FN Spon, New York, NY, 1998, pp. 40–50.
41. Shrinkage cracking resistance of blast furnace slag blended cement concrete – influencing factors and enhancing measures10.3151/jact.13.1 ↗
42. Influence of supplementary cementitious materials on engineering properties of high strength concrete10.1016/j.conbuildmat.2010.12.013 ↗
43. Effects of Mineral Admixture on Properties of Young Concrete10.1061/(ASCE)0899-1561(2003)15:5(435) ↗
44. Selected engineering properties of concrete incorporating slag and metakaolin10.1016/j.conbuildmat.2004.07.017 ↗
45. Analyses and models of the autogenous shrinkage of hardening cement paste I. Modelling at macroscopic scale10.1016/0008-8846(95)00140-8 ↗
46. Autogenous shrinkage in high-performance cement paste: an evaluation of basic mechanisms10.1016/S0008-8846(02)00890-6 ↗
47. The relationship between autogenous shrinkage and pore structure of cement paste with mineral admixtures10.1016/j.conbuildmat.2010.04.018 ↗
48. Pore structure of concrete with mineral admixtures and its effect on self-desiccation shrinkage
49. Effect of supplementary cementitious materials on autogenous shrinkage of ultra-high performance concrete10.1016/j.conbuildmat.2016.09.123 ↗
50. The effect of fineness on the properties of the blended cements incorporating ground granulated blast furnace slag and ground basaltic pumice10.1016/j.conbuildmat.2005.11.005 ↗
51. Predicting one-day, three-day, and seven-day heat of hydration of portland cement10.1061/(ASCE)MT.1943-5533.0001220 ↗
52. Zayed · 2013
53. Improved processing of blended slag cement through mechanical activation10.1023/B:JMSC.0000026948.85440.cc ↗