journal article·2019-07

Influence of fire on temperature gradient and physical-mechanical properties of macro-synthetic fiber reinforced concrete for tunnel linings

Ramoel Serafini, Sérgio R.A. Dantas, Renan P. Salvador, Ronney R. Agra, Dimas A.S. Rambo, Antonio F. Berto, Antonio D. de Figueiredo

Publisher page

Abstract

Abstract This study aims to evaluate the effect of fire on the physical, mechanical, and microstructural properties of macro-synthetic fiber reinforced concrete. Results demonstrated that internal heating rate is constant through time and is a function of the distance from the fire. Temperature gradient values are nonlinear, reduce at greater distances from the heated surface and with the duration of the fire. Microstructural analysis shows the severe dehydration of hydrated products, which negatively influences the mechanical properties of the composite. Above 205 °C the formation of nesosilicates is verified. Residual flexural strength values reduce by over 85% after the fire exposure due to deterioration of the reinforcing mechanism. Compressive strength and elastic modulus drastically reduce with temperature increase. The present study contributes to the absent literature on the post-fire mechanical behavior of MSFRC, suggests an alternative approach to the post-fire evaluation of tunnel structures, and aids in the definition of post-fire safety parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Structural applications of steel fibre reinforced concrete, in
2. Fibre reinforced concrete: New design perspectives10.1617/s11527-009-9529-4 ↗
3. Innovations on components and testing for precast panels to be used in reinforced earth retaining walls10.1016/j.conbuildmat.2010.11.003 ↗
4. Concreto reforçado com fibras
5. Balouch, Corrosion of steel fibre reinforced concrete from the cracks10.1016/j.cemconres.2004.06.032 ↗
6. Sustainability based-approach to determine the concrete type and reinforcement configuration of TBM tunnels linings. Case study: extension line to Barcelona Airport T1, Tunn10.1016/j.tust.2016.10.008 ↗
7. Design procedure and experimental study on fibre reinforced concrete segmental rings for vertical shafts10.1016/j.matdes.2015.12.061 ↗
8. Design of FRC tunnel segments considering the ductility requirements of the Model Code 201010.1016/j.tust.2015.01.006 ↗
9. Splitting and crushing failure in FRC elements subjected to a high concentrated load10.1016/j.compositesb.2016.08.032 ↗
10. Structural behaviour of precast tunnel segments in fiber reinforced concrete10.1016/j.tust.2010.10.003 ↗
11. Steel fibers as reinforcement for precast tunnel segments10.1016/j.tust.2005.12.079 ↗
12. G. Plizzari, C. Blom, J. Walraven, G. Tiberti, Concrete tunnel segments with combined traditional and fiber reinforcement, in: Tailor Made Concr. Struct., CRC Press, 2008: pp. 66–66. doi:10.1201/9781439828410.ch37.10.1201/9781439828410.ch37 ↗
13. Use of macro plastic fibres in concrete: a review10.1016/j.conbuildmat.2015.05.105 ↗
14. Precast tunnel segments reinforced by macro-synthetic fibers10.1016/j.tust.2016.12.005 ↗
15. International Tunnelling and Underground Space Association, ITAtech Report n°7 – Design guidance for precast fibre reinforced concrete segments, 2016.
16. James · Materials Science and Engineering Handbook · 2001
17. Study of temperature effect on macro-synthetic fiber reinforced concretes by means of Barcelona tests: An approach focused on tunnels assessment10.1016/j.conbuildmat.2017.10.046 ↗
18. Barcelona test for the evaluation of the mechanical properties of single and hybrid FRC, exposed to elevated temperature10.1016/j.conbuildmat.2017.01.115 ↗
19. Post-crack (or post-peak) flexural response and toughness of fiber reinforced concrete after exposure to high temperature10.1016/j.conbuildmat.2010.04.003 ↗
20. Post-fire flexural performance of hybrid-fibre-reinforced SCC symmetric inclination beams
21. Improving tunnel resilience against fires: a new methodology based on temperature monitoring10.1016/j.tust.2015.11.021 ↗
22. Effect of cement consumption on rendering mortars produced according the concepts of packing particles and mobility10.1590/s1678-86212018000100219 ↗
23. Hydration of quaternary Portland cement blends containing blast-furnace slag, siliceous fly ash and limestone powder10.1016/j.cemconcomp.2014.10.001 ↗
24. Influence of calcium to silica ratio on aluminium uptake in calcium silicate hydrate10.1016/j.cemconres.2016.01.014 ↗
25. Monitoring of Portland cement chemical reaction and quantification of the hydrated products by XRD and TG in function of the stoppage hydration technique
26. Hydration of Portland cement with red mud as mineral addition10.1007/s10973-017-6794-2 ↗
27. Accelerated cementitious matrices: hydration, microstructure and mechanical strength
28. X-ray powder diffraction applied to cement
29. C.N. Costa, Dimensionamento de elementos de concreto armado em situação de incêndio., Universidade de São Paulo, 2008. doi:10.11606/T.3.2008.tde-04092008-155911.10.11606/T.3.2008.tde-04092008-155911 ↗
30. EN 1991-1-2, Eurocode 1. Actions on structures. General actions. Actions on structures exposed to fire, London, 2002.
31. EN 14651, Test method for metallic fibred concrete — Measuring the flexural tensile strength (limit of proportionality (LOP), residual), United Kingdom, 2007.
32. fib (federation internationale du Beton), Model Code for Concrete Structures 2010, in: Ernst & Sohn, Germany, 2013: p. 434.10.1002/9783433604090 ↗
33. ASTM E1876-15, Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Impulse Excitation of Vibration, West Conshohocken, PA, 2015. doi:10.1520/E1876-15.10.1520/E1876-15 ↗
34. Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H)10.1016/j.cemconres.2013.06.008 ↗
35. Effect of temperature on porosity of concrete for nuclear-safety structures10.1016/S0008-8846(01)00516-6 ↗
36. Changes in crystal structure of ettringite on dehydration. 110.1016/0008-8846(75)90093-9 ↗
37. Changes in crystal structure of ettringite on dehydration. 210.1016/0008-8846(75)90017-4 ↗
38. Thermal stability and decomposition mechanisms of ettringite at <120°C10.1016/S0008-8846(01)00558-0 ↗
39. Dehydration and rehydration processes of cement paste exposed to high temperature environments10.1023/B:JMSC.0000025827.65956.18 ↗
40. Rai · 2012
41. Thermal stability of C-S-H phases and applicability of Richardson and Groves’ and Richardson C-(A)-S-H(I) models to synthetic C-S-H10.1016/j.cemconres.2016.12.005 ↗
42. Thermal dehydration of tobermorite and jennite
43. H.F.W. Taylor, Cement chemistry. 2nd ed., Acad. Press. (1997). doi: 10.1016/S0958-9465(98)00023-7.10.1680/cc.25929 ↗
44. Properties of mortars produced with reactivated cementitious materials10.1016/j.cemconcomp.2015.08.003 ↗
45. P. Hewlett, Lea’s Chemistry of Cement and Concrete, 4th ed., 2003.
46. Haynes · 2015
47. Scrivener · 2017
48. Activation of fly ash with dehydrated cement paste
49. Z.P. Bažant, M.F. Kaplan, Concrete at high temperatures: material properties and mathematical models, Longman, 1st ed., 1996.
50. Comparison of the strength and durability performance of normal- and high-strength pozzolanic concretes at elevated temperatures10.1016/S0008-8846(01)00580-4 ↗
51. Mechanical response and spalling sensitivity of air entrained high-strength concrete at elevated temperatures10.1016/j.conbuildmat.2017.06.039 ↗
52. Influence of thermal damage on physical properties of a granite rock: Porosity, permeability and ultrasonic wave evolutions10.1016/j.conbuildmat.2007.04.002 ↗
53. In-situ thermo-mechanical testing of fly ash geopolymer concretes made with quartz and expanded clay aggregates10.1016/j.cemconres.2015.11.006 ↗
54. Mechanical properties of steel fiber reinforced reactive powder concrete following exposure to high temperature reaching 800°C10.1016/j.nucengdes.2011.04.008 ↗
55. Effect of high temperatures on high performance steel fibre reinforced concrete10.1016/j.cemconres.2006.03.024 ↗
56. Mechanical properties of concrete at high temperature—A review10.1016/j.conbuildmat.2015.05.131 ↗