Effect of pre-tension in superelastic shape memory alloy on cyclic behavior of reinforced mortise-tenon joints
Source abstract
Abstract
Abstract A shape memory alloy (SMA) damper made of multiple SMA wires was adopted to reinforce mortise-tenon joints. By imposing 0, 1%, and 3% pre-tension in SMA wires before low horizontal cycle reciprocating loading tests, the effects of pre-tension on failure patterns, hysteretic behavior, strength and stiffness degradation, energy dissipation and resetting abilities were studied respectively. In order to describe the hysteretic characteristics of SMA-reinforced joints, analytical study was performed, and the component analysis of the bending moment in different pre-tensioned SMA reinforced joints was analyzed. The results indicated that the large pre-tension could cause the alloy wire breakage. The increase in pre-tension in the SMA wires could effectively reduce the length of tenon being pulled out and improve the ultimate bearing capacities, but the ductility of the joints was not much promoted. Pre-tension in the SMA wires helped to reduce strength degradation, but had little effect on the degree of stiffness degradation. As the pre-tension increased, the SMA wires provided higher energy dissipation, damping, and resetting abilities for reinforced joints. The predicted values obtained from the analytical study agreed well with the actual behavior, and the component analysis of the bending moment demonstrated that the proportion of the bending moment provided by SMA of 3% pre-tensioned joint was lower than that of the non-pre-tensioned joint at the same rotation angle.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Structural Engineering and Vibration Analysis · Seismic Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Liang · 1984
2. Joint characteristics of traditional Chinese wooden frames10.1016/0141-0296(96)00203-9 ↗
3. Analysis on mechanical behavior of dovetail mortise-tenon joints with looseness in traditional timber buildings10.12989/sem.2016.60.5.903 ↗
4. Theoretical estimation of the mechanical performance of traditional mortise-tenon joint involving a gap10.1007/s10086-016-1544-9 ↗
5. Seismic strengthening and seismic improvement of timber structures10.1016/j.conbuildmat.2015.05.093 ↗
6. FRP reinforcement of timber structures10.1016/j.conbuildmat.2015.06.020 ↗
7. Analysis and strengthening of carpentry joints10.1016/j.conbuildmat.2015.05.089 ↗
8. Experimental evaluation of different strengthening techniques of traditional timber connections10.1016/j.engstruct.2011.04.002 ↗
9. Seismic behavior and retrofitting of joints in traditional timber roof structures10.1016/S0267-7261(02)00146-X ↗
10. Behaviour of hybrid timber beam-to-tubular steel column moment connections10.1016/j.engstruct.2016.11.006 ↗
11. M.A. Parisi, M. Piazza, Seismic evaluation and strengthening of timber structures in traditional buildings, Proceedings of international conference 250th anniversary of the Lisbon earthquake, 2005, pp. 451–457. Lisbon, Portugal.
12. Effects of pretension in bolts on hysteretic responses of moment-carrying timber joints10.1007/s10086-007-0914-8 ↗
13. Preliminary study on wire prestressing methods for timber pieces reinforcement10.1016/j.conbuildmat.2014.11.050 ↗
14. Hysteresis behavior of t-stub connections with superelastic shape memory fasteners10.1016/j.jcsr.2005.11.017 ↗
15. Use of shape-memory alloys in construction: a critical review
16. Effects of pre-tension on fatigue behavior of rolled magnesium alloy10.1016/j.msea.2016.10.117 ↗
17. Seismic response control using shape memory alloys: a review10.1177/1045389X11411220 ↗
18. Steel beam-column connections using shape memory alloys10.1061/(ASCE)0733-9445(2004)130:5(732) ↗
19. GB/T 228.1-2010, 2010. Metallic materials—Tensile testing—Part 1: Method of test at room temperature, Beijing, China, Standardization Administration. [in Chinese].
20. A shape memory alloy-based reusable hysteretic damper for seismic hazard mitigation10.1088/0964-1726/16/5/014 ↗
21. A reduced-order thermomechanical model and analytical solution for uniaxial shape memory alloy wire actuators10.1088/0964-1726/18/6/065001 ↗
22. Thermodynamics of shape memory alloy wire: modeling, experiments, and application10.1007/s00161-006-0022-9 ↗
23. GB 1927-1943~1991, 1992. Physical and mechanical tests of wood, Beijing, China, China Technical Committee for Standardization of Timber. [in Chinese].
24. Li · 1950
25. Mechanical property of column footing joint in traditional wooden structure by quasi-static test
26. ISO 16670: 2003 (E), 2003. Timber structures—Joints made with mechanical fasteners—Quasi-static reversed-cyclic test method, Ottawa, Canada, Technical Committee ISO/TC 165, Timber structure.
27. J.Y. Xue, D. Xu, H.L. Xia, Experimental study on seismic performance of through-tenon joints with looseness in ancient timber structures, Int. J. Archit. Herit. (2018) Online.10.1080/15583058.2018.1552996 ↗
28. ASTM E 2126-05, 2005. Standard test method for cyclic (reversed) load test for shear resistance of walls for buildings, West Conshohocken, PA, USA, Annual book of ASTM standards.
29. Lateral performance of traditional heavy timber frames with mortise-tenon joints retrofitted using self-tapping screws10.1061/(ASCE)ST.1943-541X.0002191 ↗
30. Seismic evaluation of Romanian traditional buildings with timber frame and mud masonry infills by in-plane static cyclic tests10.1016/j.engstruct.2018.02.062 ↗
31. Cyclic performance of extended end-plate connections equipped with shape memory alloy bolts10.1016/j.jcsr.2013.11.008 ↗
32. Chopra · 2001
33. Enhancing the seismic performance of historic timber buildings in Asia by applying super-elastic alloy to a Chinese complex bracket system10.1080/15583058.2018.1442528 ↗
34. Q.F. Xie, L.P. Zhang, W.J. Zhou, L. Wang, T.G. Zhou, Cyclical behavior of timber mortise-tenon joints strengthened with shape memory alloy: experiments and moment-rotation model, Int J Archit Herit (2018) Online.10.1080/15583058.2018.1501116 ↗
35. Moment-rotation relations of semirigid connections with angles10.1061/(ASCE)0733-9445(1990)116:7(1813) ↗