Characteristic of silica nanoparticles on mechanical performance and microstructure of sulphoaluminate cement/ordinary Portland cement binary blends
Source abstract
Abstract
Abstract Nanosilica (NS) with ultra-fine structure and high pozzolanic activity frequently used to reinforce cement-based materials. In this study, NS was selected to modify CSA-OPC blends to meet the critical engineering properties of rapid repair materials, such as fast setting hardening, high early strength and sustainable late strength. The effects of NS on the setting time, mechanical strength, phase and mass change of hydrates and pore structure of binary blends were investigated. Results indicated that NS largely shortens the setting time. The remarkable enhancement in the early strength compared to other substitution levels by adding 1.0wt. %NS, and the sustainable late strength was maintained. XRD and TG-DTA demonstrate that ettringite was the main hydrate and its content evidently increase with the inclusion of NS. Furthermore, SEM micrographs was observed that NS effectively improves the binding between the hydrates. The utilization of NS resulted in less porosity and more homogeneous binary mortar as seen in MIP test.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Performance of silica fume-calcium hydroxide mixture as a repair material10.1016/S0958-9465(00)00075-5 ↗
2. Cement hydration and microstructure in concrete repairs with cementitious repair materials10.1016/j.conbuildmat.2016.02.203 ↗
3. Development of rapid-set high-strength cement using statistical experimental design10.1016/S0008-8846(03)00041-3 ↗
4. The role of fly ash microsphere in the microstructure and macroscopic properties of high-strength concrete10.1016/j.cemconcomp.2017.07.021 ↗
5. Novel low cost and durable rapid-repair material derived from industrial and agricultural by-products10.1016/j.ceramint.2017.07.106 ↗
6. Development of the use of sulfo- and ferroaluminate cements in China10.1680/adcr.1999.11.1.15 ↗
7. Industrially interesting approaches to “low-CO2” cements ☆10.1016/j.cemconres.2004.01.021 ↗
8. Hydration products in sulfoaluminate cements: Evaluation of amorphous phases by XRD/solid-state NMR10.1016/j.cemconres.2016.05.014 ↗
9. Utilization of lithium slag by wet-grinding process to improve the early strength of sulphoaluminate cement paste10.1016/j.jclepro.2018.09.027 ↗
10. Leaching of calcium sulfoaluminate cement pastes by water at regulated pH and temperature: Experimental investigation and modeling10.1016/j.cemconres.2013.06.014 ↗
11. Characterizing the performance of cementitious partial-depth repair materials in cold climates10.1016/j.conbuildmat.2014.07.114 ↗
12. Mechanical behaviour of micro-fine steel fibre reinforced sulphoaluminate cement composite10.1016/j.conbuildmat.2018.03.065 ↗
13. Effect of coral filler on the hydration and properties of calcium sulfoaluminate cement based materials10.1016/j.conbuildmat.2017.05.194 ↗
14. Beneficial use of limestone filler with calcium sulphoaluminate cement10.1016/j.conbuildmat.2011.06.065 ↗
15. Potential application of Portland cement-calcium sulfoaluminate cement blends to avoid early age frost damage10.1016/j.conbuildmat.2018.09.136 ↗
16. Physico-chemical interaction between mineral admixtures and OPC–calcium sulfoaluminate (CSA) cements and its influence on early-age expansion10.1016/j.cemconres.2015.11.003 ↗
17. Calcium sulfoaluminate cement blended with OPC: A potential binder to encapsulate low-level radioactive slurries of complex chemistry10.1016/j.cemconres.2009.05.016 ↗
18. Hydration of ordinary Portland cement and calcium sulfoaluminate cement blends10.1016/j.cemconcomp.2014.11.005 ↗
19. The ternary system Portland cement–calcium sulphoaluminate clinker–anhydrite: Hydration mechanism and mortar properties10.1016/j.cemconcomp.2010.03.010 ↗
20. CSA-based Portland-free binders to manufacture sustainable concretes for jointless slabs on ground10.1016/j.conbuildmat.2018.07.221 ↗
21. Effects of amorphous AH3 phase on mechanical properties and hydration process of C4A3Š-CŠH2-CH-H2O system10.1016/j.conbuildmat.2016.11.111 ↗
22. Influence of calcium sulfoaluminate (CSA) cement content on expansion and hydration behavior of various ordinary Portland cement-CSA blends10.1111/jace.13645 ↗
23. Expansion mechanisms in calcium aluminate and sulfoaluminate systems with calcium sulfate10.1016/j.cemconres.2013.11.011 ↗
24. Hydration of Portland cement with additions of calcium sulfoaluminates10.1016/j.cemconres.2012.10.011 ↗
25. 1-Year development trend of concrete compressive strength using Calcium Sulfoaluminate cement blended with OPC PFA and GGBS10.1016/j.conbuildmat.2018.11.182 ↗
26. Effects of ordinary Portland cement on the early properties and hydration of calcium sulfoaluminate cement10.1016/j.conbuildmat.2018.08.008 ↗
27. Effect of shrinkage reducing admixture on early expansion and strength evolution of calcium sulfoaluminate blended cement10.1016/j.cemconcomp.2018.06.002 ↗
28. Nanotechnology in concrete – a review10.1016/j.conbuildmat.2010.03.014 ↗
29. Investigation on the poor fluidity of electrically conductive cement-graphite paste: Experiment and simulation10.1016/j.matdes.2019.107679 ↗
30. Microstructure of cement mortar with nano-particles10.1016/S1359-8368(03)00052-0 ↗
31. Effect of nano-SiO2, nano-Al2O3 and nano-Fe2O3 powders on compressive strengths and capillary water absorption of cement mortar containing fly ash: a comparative study10.1016/j.enbuild.2012.12.014 ↗
32. Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – a review10.1016/j.conbuildmat.2017.04.206 ↗
33. Influence of nano materials on flexural behavior and compressive strength of concrete10.1016/j.hbrcj.2014.11.006 ↗
34. Characteristics of cement mortar with nano-SiO2 particles10.1016/j.conbuildmat.2005.12.020 ↗
35. Effects of the addition of nanosilica on the rheology, hydration and development of the compressive strength of cement mortars10.1016/j.compositesb.2015.07.009 ↗
36. Nano-SiO2 contribution to mechanical, durability, fresh and microstructural characteristics of concrete: a review10.1016/j.conbuildmat.2018.05.266 ↗
37. Effects of nano-SiO2 on early strength and microstructure of steam-cured high volume fly ash cement system10.1016/j.conbuildmat.2018.10.214 ↗
38. Effect of nano-SiO2 on the early hydration of alite-sulphoaluminate cement10.3390/nano7050102 ↗
39. The pozzolanic reactivity of monodispersed nanosilica hydrosols and their influence on the hydration characteristics of Portland cement10.1016/j.cemconres.2012.09.004 ↗
40. Effects of two retarders on the fluidity of pastes plasticized with aminosulfonic acid-based superplasticizers10.1016/j.conbuildmat.2011.05.004 ↗
41. SCC modification by use of amorphous nano-silica10.1016/j.cemconcomp.2013.09.001 ↗