Water resistance of magnesium oxychloride cement wood board with the incorporation of supplementary cementitious materials
Source abstract
Abstract
Abstract The water resistance of magnesium oxychloride cement (MOC) prepared with supplementary cementitious materials (SCMs), pulverized fuel ash (PFA), glass powder (GP), incinerated sewage sludge ash (ISSA), and wood fibre obtained from waste timber formworks and subjected to CO2 curing was analysed. The timber formworks were crushed and sieved to different lengths of wood fibre: Fine (0–0.6 mm), Medium (0.6–2.36 mm), Coarse (2.36–5 mm), and a mixture of the above (Mixed) without sieving. The flexural strength and volume stability of wood-cement pastes before and after water immersion were tested. Flexural strength retention was used to evaluate the water resistance of the wood cement paste. It was found that wood fibre could enhance the volume stability of MOC paste matrix after 28 days of water immersion due to the high porosity that accommodated the expansion of MOC paste. Attenuated total reflectance-Fourier transformed infrared spectroscopy (ATR-FTIR) showed new bands were formed with the incorporation of wood fibre. X-ray diffraction (XRD) results showed the formation of dashkovaite (Mg(HCOO)2·2H2O) in the wood-MOC paste. The flexural strength of the wood-cement paste increased with the increasing fibre length. Adding supplementary cementitious materials, especially incineration sewage sludge ash (ISSA), could improve the water resistance and volume stability of the wood-cement paste.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Environmental Protection Department, Monitoring of solid waste in Hong Kong: waste statistics for 2018. https://www.wastereduction.gov.hk/sites/default/files/msw2018.pdf.
2. Management of construction waste in public housing projects in Hong Kong10.1080/0144619042000213292 ↗
3. CO2 curing and fibre reinforcement for green recycling of contaminated wood into high-performance cement-bonded particleboards10.1016/j.jcou.2017.01.018 ↗
4. Ash from timber waste as cement replacement material10.1016/S0958-9465(01)00039-7 ↗
5. Wood-cement composites: a review10.1007/s00107-004-0501-2 ↗
6. Correlation between wood-cement compatibility and wood extractives
7. Wood-cement compatibility review
8. Inorganic binder for wood composites: feasibility and limitations
9. Phosphate-bonded ceramic–wood composites: R&D project overview and invitation to participate
10. Magnesium oxychloride cement concrete10.1007/s12034-007-0043-4 ↗
11. Structural, physical and mechanical properties of modified wood–magnesia composite10.1016/j.conbuildmat.2006.06.029 ↗
12. Light-weight wood–magnesium oxychloride cement composite building products made by extrusion10.1016/j.conbuildmat.2011.07.033 ↗
13. Influence of molar ratios on properties of magnesium oxychloride cement10.1016/j.cemconres.2007.03.015 ↗
14. Silicon carbide particle embedded magnesium oxychloride cement composite bricks for polishing of porcelain stoneware tiles10.1179/1743676111Y.0000000032 ↗
15. Environmental assessment of magnesium oxychloride cement samples: a case study in Europe10.3390/su11246957 ↗
16. Comparative life cycle assessment of reactive MgO and Portland cement production10.1016/j.jclepro.2016.07.071 ↗
17. Study of the new type of light magnesium cement foamed material10.1016/S0167-577X(00)00407-9 ↗
18. Design of additives for water-resistant magnesium oxychloride cement using pattern recognition10.1016/0167-577X(94)90090-6 ↗
19. Effects of a new modifier on the water-resistance of magnesite cement tiles10.1016/j.solidstatesciences.2011.08.009 ↗
20. Solubility equilibria in the system Mg (OH) 2–MgCl2–H2O from 298 to 393 K10.1021/acs.jced.6b00928 ↗
21. Solid-liquid equilibria of Mg (OH) 2 (cr) and Mg2 (OH) 3Cl· 4H2O (cr) in the system Mg-Na-H-OH-Cl-H2O at 25 C10.1016/S0016-7037(03)00165-0 ↗
22. Effect of pulverized fuel ash and CO 2 curing on the water resistance of magnesium oxychloride cement (MOC)10.1016/j.cemconres.2017.03.005 ↗
23. The role of phosphoric acid in improving the strength of magnesium oxychloride cement pastes with large molar ratios of H2O/MgCl210.1016/j.cemconcomp.2019.01.013 ↗
24. Influence of silica fume on material properties of magnesium oxychloride cement
25. Effects of Rice Husk Silica on microstructure and mechanical properties of Magnesium-oxychloride Fiber Cement (MOFC)10.1016/j.conbuildmat.2020.118022 ↗
26. Effect of hydroxyacetic acid on the water resistance of magnesium oxychloride cement10.1016/j.conbuildmat.2020.118428 ↗
27. Effect of tartaric acid and phosphoric acid on the water resistance of magnesium oxychloride (MOC) cement10.1016/j.conbuildmat.2019.04.086 ↗
28. Comparison of glass powder and pulverized fuel ash for improving the water resistance of magnesium oxychloride cement10.1016/j.cemconcomp.2017.11.010 ↗
29. Using incinerated sewage sludge ash to improve the water resistance of magnesium oxychloride cement (MOC)10.1016/j.conbuildmat.2017.04.187 ↗
30. Influence of mix design on the carbonation, mechanical properties and microstructure of reactive MgO cement-based concrete10.1016/j.cemconcomp.2017.03.004 ↗
31. Influence of supplementary cementitious materials on the performance and environmental impacts of reactive magnesia cement concrete10.1016/j.jclepro.2017.05.044 ↗
32. Effect of further water curing on compressive strength and microstructure of CO 2-cured concrete10.1016/j.cemconcomp.2016.05.026 ↗
33. Conversion of magnesium oxychloride to chlorartinite and resulting increased water resistance10.1016/j.matlet.2017.06.124 ↗
34. Role of fibre–fibre and fibre–matrix adhesion in stress transfer in composites made from resin-impregnated paper sheets10.1016/j.ijadhadh.2008.11.002 ↗
35. Development of ultra-high performance engineered cementitious composites using polyethylene (PE) fibers10.1016/j.conbuildmat.2017.10.040 ↗
36. Accelerated reactivity assessment of light burnt magnesium oxide10.1111/j.1551-2916.2008.02330.x ↗
37. Influence of fly ash and silica fume on water-resistant property of magnesium oxychloride cement10.1007/s11595-010-0079-y ↗
38. WB/T 1019-2002. Caustic burned magnesia for magnesium oxychloride cement products. 2002.
39. The influence of composition and temperature on hydrated phase assemblages in magnesium oxychloride cements10.1111/jace.14817 ↗
40. Microstructures of magnesium oxychloride10.1617/s11527-007-9289-y ↗
41. Effect of pulverized fuel ash and CO2 curing on the water resistance of magnesium oxychloride cement (MOC)10.1016/j.cemconres.2017.03.005 ↗
42. Mechanical, durability and environmental aspects of magnesium oxychloride cement boards incorporating waste wood10.1016/j.jclepro.2018.10.015 ↗
43. A review of Australian research into natural fibre cement composites10.1016/j.cemconcomp.2004.09.003 ↗
44. Long-term mechanical properties and micro mechanism of magnesium oxychloride cement concrete
45. Effect of magnesium oxychloride cement on stabilization/solidification of sewage sludge10.1016/j.conbuildmat.2009.08.011 ↗
46. The mechanism for soluble phosphates to improve the water resistance of magnesium oxychloride cement10.1016/S0008-8846(03)00043-7 ↗
47. Influence of fly ash on the properties of magnesium oxychloride cement
48. Behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materials10.1016/j.apsusc.2010.09.030 ↗
49. Pore structure of soot deposits from several combustion sources10.1016/S0045-6535(00)00040-0 ↗
50. Pore structure characterization of North American shale gas reservoirs using USANS/SANS, gas adsorption, and mercury intrusion10.1016/j.fuel.2012.06.119 ↗
51. Weng · 2010
52. Solvent-free synthesis of layered polymer crystals10.1295/polymj.34.841 ↗
53. Hydroxyl groups and acid sites in Na ZSM-5 zeolites studied by ir spectroscopy10.1016/0144-2449(85)90092-2 ↗
54. IR and NMR spectra, intramolecular hydrogen bonding and conformations of mercaptothiacalix [4] arene molecules and their para-tert-butyl-derivative10.1007/s10847-007-9376-2 ↗
55. Surface modification of poly (styrene-b-(ethylene-co-butylene)-b-styrene)(SEBS) elastomer via covalent immobilization of nonionic sugar-based Gemini surfactants10.1080/09205063.2014.918458 ↗
56. Influence of MgO/MgCl2 molar ratio on phase stability of magnesium oxychloride cement10.1007/s11595-009-3476-3 ↗
57. Influence of curing temperature on the evolution of magnesium oxychloride cement10.1007/s10853-011-5628-z ↗
58. The system MgO-MgCl2-H2O at 23° C10.1111/j.1151-2916.1980.tb10752.x ↗
59. Acetic and formic acids emitted from wood samples and their effect on selected materials in museum environments10.1016/j.corsci.2009.08.054 ↗
60. Magnesia-based cements: a journey of 150 years, and cements for the future?10.1021/acs.chemrev.5b00463 ↗
61. Application of bridging-law concepts to short-fibre composites Part 1: DCB test procedures for bridging law and fracture energy10.1016/S0266-3538(00)00004-X ↗
62. Microstructure of magnesium oxychloride cements10.1038/physci246079a0 ↗