Effect of mechanically-induced fragmentation of polyacrylic superabsorbent polymer (SAP) hydrogel on the properties of cement composites
Source abstract
Abstract
Abstract The effectiveness of internal curing of cement composites with the use of SAP depends, among others, on its chemical composition and its granulation. However, the interaction between hydrogel and other components of the concrete hasn’t been fully investigated. The aim of the presented research was to investigate the impact of cement/aggregate particles friction during mixing on the properties of water-saturated SAP. Novel mechanism of SAP hydrogel fragmentation was identified as one of the causes of differences in internal curing efficiency dependent on SAP state (water-saturated/non-saturated). Due to mixing process the surface area of tested SAP increased approx. 10 times. It was found that dosing SAP in a hydrogel form results in more homogenous SAP distribution within cement matrix. Such a modification of SAP dosing process enables to increase the efficiency of concrete internal curing. It was confirmed by obtained results for concrete mechanical strength and freeze-thaw resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Crack mitigation in concrete: superabsorbent polymers as key to success?10.3390/ma10030237 ↗
2. The effects of superabsorbent polymers on the microstructure of cementitious materials studied by means of sorption experiments10.1016/j.cemconres.2015.06.013 ↗
3. pH-Sensitive superabsorbent polymers: a potential candidate material for self-healing concrete10.1007/s10853-014-8657-6 ↗
4. Influence of SAP content and curing age on air void distribution of high-performance concrete using 3D volume analysis10.1016/j.conbuildmat.2016.12.128 ↗
5. Desorption of superabsorbent hydrogels with varied chemical compositions in cementitious materials10.1617/s11527-017-1128-1 ↗
6. The effect of the capillary forces on the desorption of hydrogels in contact with a porous cementitious material10.1617/s11527-017-1068-9 ↗
7. Effect of alkalinity and calcium concentration of pore solution on the swelling and ionic exchange of superabsorbent polymers in cement paste10.1016/j.cemconcomp.2018.02.005 ↗
8. Internal curing of alkali-activated fly ash-slag pastes using superabsorbent polimer10.1016/j.cemconres.2018.11.018 ↗
9. Superabsorbent polymers: a review on the characteristics and applications of synthetic, polysaccharide-based, smi-synthetic and ‘smart’ derivatives10.1016/j.eurpolymj.2019.04.054 ↗
10. Effect of water absorption of SAP on the rheological properties of cement-based materials with ultra-low w/b ratio10.1016/j.conbuildmat.2018.11.050 ↗
11. Examining curing efficiency using neutron radiography10.1177/0361198118773571 ↗
12. Can superabsorbent polymers mitigate autogenous shrinkage of internally cured concrete without compromising the strength?10.1016/j.conbuildmat.2011.12.062 ↗
13. Influence of Barchip fiber length on early-age behaviour and cracking resistance of concrete internally cured with super absorbent polymers10.1016/j.conbuildmat.2019.03.209 ↗
14. Efficiency of internal curing by superabsorbent polymers (SAP) in PC-GGBS mortars10.1016/j.cemconcomp.2018.01.002 ↗
15. Influence of ground granulated blast furnace slag on early-age cracking potential of internally cured high performance concrete10.1016/j.conbuildmat.2019.117083 ↗
16. Influence of Effective Water-to-Cement Ratios on Internal Damage and Salt Scaling of Concrete with Superabsorbent Polymer10.3390/ma12233863 ↗
17. Hygric parameters of cement-lime plasters modified by superabsorbent polymers10.1051/matecconf/201928202059 ↗
18. Effect of Barchip fiber on stress relaxation and cracking potential of concrete internally cured with super absorbent polymers10.1016/j.conbuildmat.2020.118392 ↗
19. Numerical investigation of crack self-sealing in cement-based composites with superabsorbent polymers
20. The pore structure of hydrating cementitious materials visualized and studied by NMR and MIP, Nanotechnology in construction (NICOM6)
21. Improved Concrete Materials with Hydrogel-Based Internal Curing Agents10.3390/gels3040046 ↗
22. Performances of cement mortar incorporating superabsorbent polymer (SAP) using different dosing methods10.3390/ma12101619 ↗
23. The influence of dosing method and material characteristics of superabsorbent polymers (SAP) on the effectiveness of the concrete internal curing10.3390/ma11091600 ↗
24. On the Effect of Chemical Composition on the Desorption of Superabsorbent Hydrogels in Contact with a Porous Cementitious Material10.3390/gels4030070 ↗
25. Absorption kinetics of superabsorbent polymers (SAP) in various cement-based solutions10.1016/j.cemconres.2017.03.009 ↗
26. M. Kalinowski, P. Woyciechowski, The course of water absorption and desorption from superabsorbent polymers (SAP) in cementitious environment, Proceedings of the ICSBM 2019 – The 2nd International Conference on Sustainable Building Materials At: Eindhoven, The Netherlands, Vol. 5, 44–54.
27. The role of superabsorbent polymer on strength and microstructure development in cemented dredged clay with high water content10.3390/polym10101069 ↗
28. Hygral behavior of superabsorbent polymers with various particle sizes and cross-linking densities10.3390/polym9110600 ↗
29. Designing the composition of cement stabilized rammed earth using artificial neural networks10.3390/ma12091396 ↗
30. Recommendations of RILEM TC 260-RSC for using superabsorbent polymers (SAP) for improving freeze–thaw resistance of cement-based materials10.1617/s11527-019-1375-4 ↗
31. Pore structure of affected zone around saturated and large superabsorbent polymers in cement paste10.1016/j.cemconcomp.2018.12.020 ↗
32. Autogenous Healing in Strain-Hardening Cementitious Materials With and Without Superabsorbent Polymers: An 8-Year Study10.3389/fmats.2019.00048 ↗
33. Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: results of a RILEM round-robin test10.1617/s11527-013-0078-5 ↗
34. Water penetration through cracks in self-healing cementitious materials with superabsorbent polymers studied by neutron radiography10.1016/j.cemconres.2018.07.002 ↗
35. An overview on the effect of internal curing on shrinkage of high performance cement-based materials10.1016/j.conbuildmat.2017.04.154 ↗
36. Internal curing with superabsorbent polymers of different chemical structures10.1016/j.cemconres.2019.105789 ↗
37. Recommendation of RILEM TC 260-RSC: using superabsorbent polymers (SAP) to mitigate autogenous shrinkage10.1617/s11527-018-1241-9 ↗
38. Superabsorbent polymers to seal and heal cracks in cementitious materials10.21809/rilemtechlett.2018.64 ↗
39. Early-state water migration characteristics of superabsorbent polymers in cement pastes10.1016/j.cemconres.2019.02.010 ↗
40. Autogenous Healing in Cementitious Materials with Superabsorbent Polymers Quantified by Means of NMR
41. J.R.T. Filho, E. Mannekens, D. Snoeck, N. De Belie, Investigating the efficiency of “in-house” produced hydrogels as internal curing agents in cement pastes, Proceedings of the ICSBM 2019 – The 2nd International Conference on Sustainable Building Materials At: Eindhoven, The Netherlands, Vol. 5, 37–43.
42. Evaluation of the self-healing ability of mortar mixtures containing superabsorbent polymers and nanosilica10.3390/ma13020380 ↗