journal article·2020-12Open access

Electrical resistivity and piezoresistivity of cement mortar containing ground granulated blast furnace slag

Lining Wang, Farhad Aslani

Abstract

Abstract Ground granulated blast furnace slag (GGBFS) is a popular used supplementary cementitious material which can increase the resistivity of cement-based composites, contribute to the cement hydration, and dense the composite structure. The piezoresistivity of cement mortar containing GGBFS was studied in this paper. Three GGBFS/cement ratio, 1.2, 1.5, and 1.8, were designed to study the effect of GGBFS content on the piezoresistivity behaviour of cement mortar. Samples were measured before and after drying treatment, and three water/binder ratios were designed to study the influence of water content on the electrical properties. Furthermore, mechanical properties and microscopy analysis were conducted. Results showed that compared to pure cement mortar, samples containing GGBFS showed an improvement in piezoresistivity behaviour. Sample with GGBFS/cement ratio at 1.2 performed the largest fractional change in resistivity of 5.57, 9.23 and 16.73 with water/binder ratio at 0.3, 0.4 and 0.5, respectively, as the concentration of pore solution was higher for samples with GGBFS/cement ratio at 1.2 compared to pure cement mortar. However, with the increasing GGBFS/cement ratio, the piezoresistivity performance was adversely affected due to the reduced pore solution concentration and conductivity caused by the increasing assumption of free calcium hydroxide. Through the investigation, piezoresistivity performance of the cement-based composite was found to be related to the mobile ions transportation with the pore solution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Concrete Corrosion and Durability · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. A study on the mechanical and electricity properties of cement mortar added with GGBFS and piezoelectric powder10.1016/j.conbuildmat.2013.07.036 ↗
2. The effects of elevated temperature on cement paste containing GGBFS10.1016/j.cemconcomp.2007.12.003 ↗
3. Studies on the corrosion resistance of reinforced steel in concrete with ground granulated blast-furnace slag—An overview10.1016/j.jhazmat.2006.07.022 ↗
4. M. Shariq, J. Prasad, A.K. Ahuja, Strength development of cement mortar and concrete incorporating GGBFS, 2008.
5. Piezoresistive properties of cement-based sensors: review and perspective10.1016/j.conbuildmat.2019.01.081 ↗
6. Intrinsic self-sensing concrete and structures: A review10.1016/j.measurement.2014.09.048 ↗
7. A study of piezoelectric properties of carbon fiber reinforced concrete and plain cement paste during dynamic loading10.1016/S0008-8846(00)00338-0 ↗
8. Piezoelectric effect of hardened cement paste10.1016/S0958-9465(03)00104-5 ↗
9. Piezoelectric materials for sustainable building structures: fundamentals and applications10.1016/j.rser.2018.09.038 ↗
10. Piezoresistivity-based strain sensing in carbon fiber-reinforced cement
11. Electrical properties of cement-based composites with carbon nanotubes, graphene, and graphite nanofibers10.3390/s17051064 ↗
12. Investigations on scalable fabrication procedures for self-sensing carbon nanotube cement-matrix composites for SHM applications10.1016/j.cemconcomp.2015.11.001 ↗
13. Mechanical and smart properties of carbon fiber and graphite conductive concrete for internal damage monitoring of structure10.1016/j.conbuildmat.2017.03.048 ↗
14. Assessment of self-sensing capability of carbon black engineered cementitious composites10.1016/j.conbuildmat.2018.04.031 ↗
15. Self-sensing piezoresistive cement composite loaded with carbon black particles10.1016/j.cemconcomp.2017.04.009 ↗
16. Mechanical and electrical characterisation of steel fiber and carbon black engineered cementitious composites10.1016/j.proeng.2017.04.491 ↗
17. Effect of nano-titanium dioxide on mechanical and electrical properties and microstructure of reactive powder concrete10.1088/2053-1591/aa87db ↗
18. Smart cement modified with iron oxide nanoparticles to enhance the piezoresistive behavior and compressive strength for oil well applications10.1088/0964-1726/24/12/125020 ↗
19. A review on material design, performance, and practical application of electrically conductive cementitious composites10.1016/j.conbuildmat.2019.116892 ↗
20. Electrical conductivity of setting cement paste with different mineral admixtures10.1016/j.conbuildmat.2011.08.068 ↗
21. Hybrid effect of carbon fiber on piezoresistivity of carbon nanotube cement-based composite
22. AS 3972. General purpose and blended cements, Stand. Aust., 2010
23. AS 3582, Supplementary cementitious materials for use with portland and blended cement - Slag 443 - Ground granulated iron blast-furnace, Stand. Aust., 2001
24. AS 3583, Supplementary cementitious materials for use with portland cement – Silica fume. 445, Stand. Aust., 1994
25. Electrode design, measuring method and data acquisition system of carbon fiber cement paste piezoresistive sensors10.1016/j.sna.2006.08.003 ↗
26. Coarse blast furnace slag as a cementitious material, comparative study as a partial replacement of Portland cement and as an alkali activated cement10.1016/j.conbuildmat.2009.02.002 ↗
27. Nonevaporable water from neat OPC and replacement materials in composite cements hydrated at different temperatures10.1016/S0008-8846(03)00208-4 ↗
28. Mechanical properties of reactive powder concrete containing high volumes of ground granulated blast furnace slag10.1016/j.cemconcomp.2010.07.005 ↗
29. Engineering properties of cementless concrete produced from GGBFS and recycled desulfurisation slag10.1016/j.conbuildmat.2014.04.017 ↗
30. Effect of time span between mixing and compacting on roller compacted concrete (RCC) containing ground granulated blast furnace slag (GGBFS)10.1016/j.conbuildmat.2010.04.054 ↗
31. Self sensing carbon nanotube (CNT) and nanofiber (CNF) cementitious composites for real time damage assessment in smart structures10.1016/j.cemconcomp.2014.07.003 ↗
32. Continuous tracking of the relationship between resistivity and pore structure of cement pastes10.1016/j.conbuildmat.2013.11.067 ↗
33. The pore solution of blended cements: a review10.1617/s11527-015-0724-1 ↗
34. Electrical conductivity of drying cement paste10.1617/s11527-006-9211-z ↗
35. The mineralogy and microstructure of three composite cements with high replacement levels10.1016/S0958-9465(01)00041-5 ↗
36. Effect of ground granulated blast furnace slag (GGBFS) on RCCP durability10.1016/j.conbuildmat.2017.03.019 ↗