journal article·2020-12Open access

Rheological and fatigue characterisation of bitumen modified by anti-ageing compounds

Eman L. Omairey, Yuqing Zhang, Fan Gu, Tao Ma, Pengsen Hu, Rong Luo

Abstract

When exposed to the ambient environment for an extended period, bitumen ages and causes the failure of asphalt pavement, the addition of anti-ageing compounds (AACs) to bitumen binders can prolong the service life of the pavement. This study investigates the effects of anti-ageing compounds on the fatigue performance of bitumen when subjected to different ageing conditions. The AAC-modified bitumen binders were tested by dynamic shear rheometer (DSR) and Fourier transform infrared spectroscopy test (FTIR) at different ageing conditions including unaged, short-term ageing by thin film oven test (TFOT) and long-term ageing by pressure ageing vessel (PAV). The fatigue performance of the AAC-modified bitumen was characterised by the dissipated energy ratio (DER), SHRP fatigue parameter and the DSR-cracking (DSR-C) approach developed by the authors. Linear amplitude sweep (LAS) tests were firstly run at 20 °C, 10 Hz and 0.1–15% controlled shear strain conditions, to obtain the phase angles and shear moduli at the undamaged conditions. Time sweep (TS) tests were then conducted at 5% shear strain, also at 20 °C and 10 Hz, and up to 24,000 loading cycles to obtain phase angles, shear moduli and DER at damaged conditions. The crack lengths in the TS tests were calculated by DSR-C model and then validated by the image analysis method. The results suggest that, compared to the DER or SHRP fatigue parameter, DSR-C predicted crack lengths show a more consistent and reliable agreement with laboratory measurements. DSR-C test can differentiate fatigue cracking performance among binders modified with AACs, and the normalised carbonyl index may be a reliable parameter to reflect the impact of ageing products on the fatigue resistance of AAC-modified binders. Bitumen samples modified with 12% (1 furfural: 5 Irganox 1076), 15% Irganox 1076 and 3.5% (3 DLTDP: 4 furfural) demonstrated the best anti-ageing behaviour by retarding carbonyl content growth and decreasing the fatigue damage among selected AACs without sacrificing the stiffness of binder. However, rutting susceptibility at earlier stages of service life needs further investigations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Understanding the bitumen ageing phenomenon: A review10.1016/j.conbuildmat.2018.10.169 ↗
2. Hunter · 2015 · 744
3. Development of SHRP binder specification (with discussion)
4. Identifying fatigue failure in asphalt binder time sweep tests10.1016/j.conbuildmat.2016.06.020 ↗
5. A review of the fundamentals of asphalt oxidation: chemical, physicochemical, physical property, and durability relationships
6. An environmental friendly anti-ageing additive to bitumen10.1016/j.conbuildmat.2016.02.004 ↗
7. Impact of anti-ageing compounds on oxidation ageing kinetics of bitumen by infrared spectroscopy analysis10.1016/j.conbuildmat.2019.07.021 ↗
8. Molecular dynamics study of oxidative aging effect on asphalt binder properties10.1016/j.fuel.2016.10.021 ↗
9. Nonlinear viscoelastic and fatigue properties of asphalt binders
10. Energy dissipation: the leading factor of fatigue (No
11. Energy-derived, damage-based failure criterion for fatigue testing10.3141/1723-18 ↗
12. Evaluation of fatigue criteria for asphalt binders10.3141/1766-07 ↗
13. Fatigue and healing performance assessment of asphalt binder from rheological and chemical characteristics10.1617/s11527-018-1300-2 ↗
14. Predicting crack growth in viscoelastic bitumen under a rotational shear fatigue load
15. Understanding mechanisms leading to asphalt binder fatigue in the dynamic shear rheometer10.1080/14680629.2013.818818 ↗
16. Internal crack growth of asphalt binders during shear fatigue process10.1016/j.fuel.2016.10.094 ↗
17. Rheological properties and anti-ageing performance of asphalt binder modified with wood lignin10.1016/j.conbuildmat.2017.06.151 ↗
18. Influence of ageing on the evolution of structure, morphology and rheology of base and SBS modified bitumen10.1016/j.conbuildmat.2008.05.004 ↗
19. Evaluation of fatigue behavior of high reclaimed asphalt binder mixes modified with rejuvenator and softer bitumen10.1016/j.conbuildmat.2018.09.182 ↗
20. Physico-chemo-rheological characterisation of neat and polymer-modified asphalt binders10.1016/j.conbuildmat.2018.12.064 ↗
21. Intermediate pyrolysis of organic fraction of municipal solid waste and rheological study of the pyrolysis oil for potential use as bio-bitumen10.1016/j.jclepro.2018.03.205 ↗
22. Effect of chemical composition and structure of asphalt binders on self-healing10.1016/j.conbuildmat.2016.12.082 ↗
23. P.W. Jennings J.A.S. Pribanic K.R. Dawson C.E. Bricca HPLC and NMR spectroscopy to characterise asphaltic materials Am. Chem. Soc., Div. Pet. Chem., Prepr.; (United States) 26(CONF-810813-(Vol 1981 2))
24. Background of superpave asphalt binder test methods
25. The search for a measure of fatigue cracking in asphalt binders–a review of different approaches10.1080/10298436.2017.1279490 ↗
26. Molecular dynamics investigation of interfacial adhesion between oxidised bitumen and mineral surfaces10.1016/j.apsusc.2019.02.121 ↗
27. Impact of minerals and water on bitumen-mineral adhesion and debonding behaviours using molecular dynamics simulations10.1016/j.conbuildmat.2018.03.136 ↗
28. Laboratory evaluation of anti-oxidants for asphalt binders10.1016/j.conbuildmat.2010.06.058 ↗
29. The effect of surface modifiers on ultraviolet ageing properties of nano-zinc oxide modified bitumen10.1080/10916466.2014.948119 ↗
30. Rheological properties and chemical bonding of asphalt modified with nanosilica10.1061/(ASCE)MT.1943-5533.0000690 ↗
31. Preparation and properties of montmorillonite modified asphalts10.1016/j.msea.2006.10.037 ↗
32. Nanoclay-modified asphalt materials: Preparation and characterisation10.1016/j.conbuildmat.2010.06.070 ↗
33. Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
34. D6521–18, Standard Practice for Accelerated Ageing of Asphalt Binder Using a Pressurised Ageing Vessel (PAV)
35. Ghile, D.B., 2006. Effects of nanoclay modification on rheology of bitumen and on performance of asphalt mixtures.
36. Effect of shear processing on the linear viscoelastic behaviour and microstructure of bitumen/montmorillonite/MDI ternary composites10.1016/j.jiec.2017.01.004 ↗
37. Lubrication properties of trimethylolpropane esters based on palm oil and palm kernel oils10.1002/ejlt.200300862 ↗
38. D7405–15, Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
39. AASHTO T315-12-UL, 2012. Standard method of test for determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR).
40. Harrison · A differential scanning calorimetry study of asphalt binders · 1992 · No. SHRP-A/UFR-92-612
41. Oxidation induction time and oxidation onset temperature of polyethylene in air: testing Gimzewski’s postulate10.1007/s10973-009-0097-1 ↗
42. Dessouky, S., Contreras, D., Sanchez, J. and Park, D., 2015. Anti-Oxidants’ Effect on Bitumen Rheology and Mixes’ Mechanical Performance. In Innovative materials and design for sustainable transportation infrastructure (pp. 8-18).10.1061/9780784479278.002 ↗
43. Improving the ageing resistance of styrene–butadiene–styrene tri-block copolymer modified asphalt by addition of anti-oxidants10.1016/j.polymdegradstab.2005.06.009 ↗
44. Thermal decomposition of asphalt sulfoxides10.1016/0016-2361(95)00039-8 ↗
45. Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy10.1016/j.conbuildmat.2012.08.004 ↗
46. Jr · Degradation studies of a trimethylolpropane triheptanoate lubricant basestock · 1977 · No. SWRI-RS-657
47. Advanced analytical techniques in fatigue and rutting related characterisations of modified bitumen: Literature review10.1016/j.conbuildmat.2017.08.147 ↗
48. The multiple stress creep-recovery test: a detailed analysis of repeatability and reproducibility10.1080/14680629.2013.774742 ↗