Effect of various NaOH molarities and various filling materials on the behavior of fly ash based geopolymer composites
Source abstract
Abstract
Abstract Among the recent research interests in the construction section, Geopolymers, represent a rising trend due to their significant performance in terms of strength and long term properties. In this research, an attempt was conducted to examine the effect of using different filling materials and the effect of different NaOH concentrations on the properties of the resulted composites. Strength properties, physical properties, abrasion resistance, and freezing-thawing behavior were tested along with a microstructural characterization that included scanning electron microscopy (SEM) and X-ray diffraction (XRD). In general, the effect of including crushed limestone and waste foundry sand was beneficial in terms of the general properties of the fabricated specimens. Also, the microstructural analyses showed a compact matrix that could be considered in line with the obtained results from the other tests.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Materials Engineering and Processing · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Global strategies and potentials to curb CO2 emissions in cement industry10.1016/j.jclepro.2012.10.049 ↗
2. Geopolymers and geopolymeric materials10.1007/BF01904446 ↗
3. The geopolymerisation of alumino-silicate minerals10.1016/S0301-7516(99)00074-5 ↗
4. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
5. Utilisation of fly ash in a geopolymeric material10.1016/S0883-2927(02)00005-7 ↗
6. Theoretical and experimental study on mechanical properties and flexural strength of fly ash-geopolymer concrete10.1016/j.conbuildmat.2015.12.033 ↗
7. Microstructural and morphological evolution of fly ash based geopolymers10.1016/j.conbuildmat.2016.02.106 ↗
8. Factors influencing the compressive strength of fly ash based geopolymers10.1016/j.conbuildmat.2015.11.045 ↗
9. The influence of fly ash characteristics and reaction conditions on strength and structure of geopolymers ˇ arevic10.1016/j.conbuildmat.2015.07.014 ↗
10. Effects of elevated temperatures on the thermal behavior and mechanical performance of fly ash geopolymer paste, mortar and lightweight concrete10.1016/j.conbuildmat.2013.09.047 ↗
11. Preparation and characterisation of fly ash based geopolymer mortars10.1016/j.conbuildmat.2010.04.012 ↗
12. Influence of aggregate content on the behavior of fly ash based geopolymer concrete10.1016/j.scient.2012.07.006 ↗
13. Effect of fine aggregat blending on short-term mechanical properties of geopolymer concrete
14. Bavita Bhardwaj, Pardeep Kumar, IOP Conf. Ser.: Mater. Sci. Eng., 2018, 431, 092009.10.1088/1757-899X/431/9/092009 ↗
15. Re-usage of waste foundry sand in high-strength concrete10.1016/j.wasman.2010.02.018 ↗
16. Effect of waste foundry sand (WFS) as partial replacement of sand on the strength, ultrasonic pulse velocity and permeability of concrete10.1016/j.conbuildmat.2011.06.041 ↗
17. Environmental, physical and structural characterisation of geopolymer matrixes synthesised from coal (co-)combustion fly ashes10.1016/j.jhazmat.2007.10.008 ↗
18. Comparative study on the characteristics of fly ash and bottom ash geopolymers10.1016/j.wasman.2008.06.023 ↗
19. NaOH-activated ground fly ash geopolymer cured at ambient temperature10.1016/j.fuel.2011.01.018 ↗
20. The influence of the NaOH solution on the properties of the fly ash-based geopolymer mortar cured at different temperatures10.1016/j.compositesb.2013.10.082 ↗
21. ASTM C618-17a, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, 2017, ASTM International.
22. BS EN 196-1, BSI Standards Publication Methods of testing cement Part 1: Determination of strength, 2016.
23. ASTM C109/C109M-16a, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens, 2016, ASTM International.
24. ASTM C348-14, Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars, 2014, ASTM International.
25. ASTM C944/C944M-12, Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method, 2012, ASTM International.
26. J.M. Khatib, D.J. Ellis, Mechanical properties of concrete containing foundry sand” ACI Special Publication, SP-200, 2001, 733–748.
27. Hardjito · 2005
28. Effect of aggregate properties on the mechanical and absorption characteristics of geopolymer mortar
29. Mechanical and microstructural characterization of fiber reinforced fly ash based geopolymer composites10.1016/j.conbuildmat.2018.02.061 ↗
30. High-temperature behavior and mechanical characteristics of boron waste additive metakaolin based geopolymer composites reinforced with synthetic fibers10.1016/j.conbuildmat.2018.08.062 ↗
31. Effect of using colemanite waste and silica fume as partial replacement on the performance of metakaolin-based geopolymer mortars10.1016/j.conbuildmat.2018.05.034 ↗
32. Impact properties of geopolymer based extrudates incorporated with fly ash and PVA short fiber10.1016/j.conbuildmat.2006.08.006 ↗
33. Freeze-thaw and fire resistance of geopolymer mortar based on natural and waste Pozzolans
34. Preparation of geopolymer from fluidized bed combustion bottom ash10.1016/j.jmatprotec.2007.09.008 ↗
35. The mechanical properties of fly ash-based geopolymer concrete with alkaline activators
36. Strength, permeability and micro-structural characteristics of low-calcium fly ash based geopolymers10.1016/j.conbuildmat.2017.03.031 ↗
37. Do geopolymers actually contain nanocrystalline zeolites? a reexamination of existing results10.1021/cm050230i ↗