Determining the properties of semi-flexible pavement using waste tire rubber powder and natural zeolite
Source abstract
Abstract
Abstract The small amount of bitumen contained in semi-flexible pavement (SFP) causes the peeling of the aggregate grains, therefore, it is necessary to include some additives such as waste tire rubber (WTR) to increase the adhesion. Moreover, natural zeolite contains a high amount of silica and this makes it suitable as a replacement for cement in SFP filling mortar. This research was, therefore, aimed at determining the compressive strength, flexural strength, drying shrinkage, permeability, durability, and the stress-strain relationship of semi-flexible pavement (SFP) using waste tire rubber (WTR) powder as an additive material and natural zeolite as cement replacement. The porous asphalt mix was designed in accordance with the optimum asphalt proportion and open-graded aggregate as specified in the 2010 Indonesian Bina Marga Standards and 2014 Australian Asphalt Pavement Association (AAPA), respectively. The process involved the addition of WTR powder on liquid asphalt at 3%, 4%, and 5% before the porous asphalt was mixed. This was followed by conducting a Marshall test on the specimens to determine if they satisfied the Bina Marga Standards. The porous asphalt specimens were grouted by cement mortar with the cement content replaced by 0%, 5%, 15%, and 25% natural zeolite (w/w) to produce SFP after which the properties of SFP were tested after 14 days. The results showed the best properties were obtained at 5% tire rubber powder and 15% zeolite content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Innovative concrete reinforcement materials · Geotechnical and construction materials studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Qinglin · 2001
2. Effect of high temperature and traffic loading on rutting performance of flexible pavement10.1016/j.jksues.2018.04.005 ↗
3. Kelebihan serta kekurangan perkerasan beraspal dan beton
4. D. Sarwono, A.K. Wardhani AK, Pengukuran sifat permeabilitas campuran porous asphalt, Media Teknik Sipil 7(2) (2007) 131-138.
5. Setyawan · 2003
6. Design and properties of hot mixture porous asphalt for semi flexible pavements application
7. Development of a recycled polymer modified binder for use in stone mastic asphalt10.1016/j.resconrec.2008.06.002 ↗
8. Rubberized concrete durability against abrasion10.1051/matecconf/20164701006 ↗
9. Development of a semi-flexible heavy duty pavement surfacing incorporating recycled and waste aggregates – Prelimenary study10.1016/j.conbuildmat.2015.10.165 ↗
10. N.M. Husain, M.R. Karim MR, H.B. Mahmud, S. Koting, Effects of aggregate gradation on the physical properties of semiflexible pavement, Adv. Mater. Sci. Eng. 2014 (2014) 529305. https://doi.org/10.1155/2014/529305.10.1155/2014/529305 ↗
11. Effects of crushed RAP on free and restrained shrinkage of mortars10.4334/IJCSM.2009.3.2.091 ↗
12. Ahlrich · 1991
13. Study on optimization of polymer modified cement slurry for poured semi-flexible pavement
14. Modification mechanism of asphalt binder with waste tire rubber and recycled polyethylene10.1016/j.conbuildmat.2016.09.014 ↗
15. Thermal stress of asphalt pavement based on dynamic characteristics of asphalt mixtures10.1016/j.ijprt.2016.08.009 ↗
16. Finding an equivalent hot-mix asphalt for cold-in-place recycled asphalt using laboratory testing and numerical analysis
17. Formulation and performance comparison of grouting materials for semi-flexible pavement10.1016/j.conbuildmat.2016.04.062 ↗
18. Plug · 2006
19. Karakteristik mortar semen untuk cement treated asphalt mixture
20. S.E. Zoorob, K.E. Hassan, A. Setyawan. Effect of cementitious grout on the properties of semi-flexible bituminous pavement, Proc. of the Fourth European Symposium on Performance of Bituminous and Hydraulic Materials in Pavements, Nottingham, United Kingdom (2002) 131-138.
21. Elasticity modulus analysis of asphalt concrete reinforced with geotextile from the result of beam bending test
22. Study on properties of recycled tire rubber modified asphalt mixtures using dry process10.1016/j.conbuildmat.2006.02.004 ↗
23. The mechanical performance of dry-process crumb rubber modified hot bituminous mixes: The influence of digestion time and crumb rubber percentage10.1016/j.conbuildmat.2011.06.046 ↗
24. Estimating correlations between rheological and engineering properties of rubberized asphalt concrete mixtures containing warm mix asphalt additive10.1016/j.conbuildmat.2010.06.087 ↗
25. P.S. Wulandari, D. Tjandra D, Use of crumb rubber as an additive in asphalt concrete mixture, Proc. Eng. 171 (2017) 1384-1389. https://doi.org/10.1016/j.proeng.2017.01.451.10.1016/j.proeng.2017.01.451 ↗
26. Rubberized asphalt mixture design using a theoretical model10.1016/j.conbuildmat.2014.01.011 ↗
27. Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additive10.1016/j.conbuildmat.2009.06.036 ↗
28. F.J. Navarro, P. Partal, F.J. Martinez-Boza, F. Gallegos, Thermo-rheological behavior and storage stability of ground tire rubber-modified bitumens, Fuel 14-15 October 2004; 83.10.1016/j.fuel.2004.04.003 ↗
29. Effect of sulfur on the storage stability of tire rubber modified asphalt
30. M. Attia, M.A. Abdelrahman, Enhancing the performance of crumb rubber-modified binders through varying 1 the interaction conditions. M. 6. Int. J. Pav. Eng. 10 (2009) 423-434. https://doi.org/10.1080/10298430802343177.10.1080/10298430802343177 ↗
31. A study on the performance and storage stability of crumb rubber-modified 11 asphalts10.1080/10916460903070421 ↗
32. Durability evaluation study for crumb rubber-asphalt pavement10.3390/app9163434 ↗
33. Improvement of moisture damage resistance and permanent deformation performance of asphalt mixtures with marginal porous volcanic aggregates using crumb rubber modified bitumen10.1016/j.conbuildmat.2018.12.181 ↗
34. Specification · 2004
35. Bina Marga Standard. General specification, Division 6: Asphalt pavement, 2010.
36. S.M. Saleh, R. Anggraini R, H. Aquina, Karakteristik campuran aspal porus dengan substitusi styrofoam pada aspal penetrasi 60/70, J. Teknik Sipil ITB 21(3) (2014) 241-250. http://dx.doi.org/10.5614%2Fjts.2014.21.3.7.10.5614/jts.2014.21.3.7 ↗
37. ASTM D6927. Standard test method for Marshall stability and flow of asphalt mixtures, 2015.
38. REAM-SP5, Spesification for porous ssphalt, Road Engineering Assosiation of Malaysia, 2008.
39. ASTM D1074. Standard test method for compressive strength of asphalt mixtures, 2017.