journal article·2021-02

Effect of fly ash and slag on properties of normal and high strength concrete including fracture energy by wedge splitting test: Experimental and numerical investigations

Ayad Al-Yousuf, Tilak Pokharel, Jessey Lee, Emad Gad, Kamiran Abdouka, Jay Sanjayan

Publisher page

Abstract

Abstract The effect of supplementary cementitious material (fly ash and slag) on the properties of concrete was investigated at different ages starting from as early as 18 h in this paper. The tests covered concrete mix with a different amount of supplementary cementitious material (SCM). The effect of SCM on the properties of concrete (compressive strength, splitting tensile strength, modulus of elasticity, Poisson’s ratio and fracture energy) was investigated. Properties of concrete including fracture energy of concrete by wedge splitting test (WST) with different percentage of fly ash (FA) and slag were evaluated. For a mix with 50% slag, there was a decline in the values of compressive strength of concrete, splitting tensile strength, modulus of elasticity and fracture energy compared with a mix with 25% FA. The mix with 25% FA also had a higher fracture energy of concrete than the mix with 50% slag. The fracture energy decreased when FA and slag were added at all ages compared to the pure cement mix. A finite element (FE) model was developed and the results from the FE analysis were compared with the experimental work. A good agreement was achieved in terms of fracture energy and splitting load vs crack mouth opening displacement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. C 224 cracking of concrete members in direct tension
2. 233R–95 ground granulated blast-furnace slag as a cementitious constituent in concrete
3. ACI-318 · 2014
4. Al-Yousuf · 2018
5. AS1012.8.1 2000. Methods of testing concrete: Method 8.1: Method for making and curing concrete - Compression and indirect tensile test specimens. Standards Australia, Sydney.
6. AS1012.10 · 2000
7. AS3582.2 · 2001
8. AS3850.1 · 2015
9. AS5216 · 2018
10. C 469 Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression
11. C 143/C143M standard test method for slump of hydraulic-cement concrete
12. The wedge splitting test, a new method of performing stable fracture mechanics tests10.1016/0013-7944(90)90189-N ↗
13. Bures · 2017
14. CEN · 2018
15. Cervenka · 2012
16. Industrial research on connections for precast and in-situ concrete
17. Eligehausen · 2006
18. The properties of portland cements containing milled granulated blast-furnace slag
19. Concrete Incorporating High Volumes of ASTM Class F fly Ash10.1520/CCA10088J ↗
20. Effect of curing time on the fracture toughness of fly ash concrete composites10.1016/j.compstruct.2017.10.090 ↗
21. Estimation of the optimum content of fly ash in concrete composite based on the analysis of fracture toughness tests using various measuring systems10.1016/j.conbuildmat.2019.04.071 ↗
22. Measurement of fracture mechanics parameters of concrete containing fly ash thanks to use of Digital Image Correlation (DIC) method10.1016/j.measurement.2018.11.032 ↗
23. Hanjari · 2006
24. Fracture mechanics studies on concrete compounds10.1016/0008-8846(77)90114-4 ↗
25. Evaluation for durability and strength development of a ground granulated blast furnace slag10.1520/CCA10201J ↗
26. Tensile and tensile fatigue behaviour of concrete; experiments, modelling and analyses
27. Optimum fly ash content for lower cost and superior durability
28. Static and fatigue fracture mechanics properties of self-compacting concrete using three-point bending tests and wedge-splitting tests10.1016/j.conbuildmat.2014.01.090 ↗
29. Fracture energy determination of concrete with cube-shaped specimens
30. Löfgren · 2004
31. Fracture properties of FRC determined through inverse analysis of wedge splitting and three-point bending tests10.3151/jact.3.423 ↗
32. Effect of cement C 3 A content on properties of cementitious systems containing high-range water-reducing admixture10.1061/(ASCE)MT.1943-5533.0001925 ↗
33. Triaxial failure criterion for concrete and its generalization
34. Production of granulated blast furnace slag at sparrows point, and the workability and strength potential of concrete incorporating the slag
35. The J-integral as a fracture criterion for fiber reinforced concrete10.1016/0008-8846(77)90057-6 ↗
36. Tensile load capacity of screw anchors in early age concrete10.1016/j.conbuildmat.2016.10.046 ↗
37. Influence of fly ash on setting and hardening characteristics of concrete systems
38. Neville · 2015
39. The relationship between setting time and early age strength of concrete containing silica fume, fly ash and slag
40. Nilson · 1991
41. Østergaard · 2003
42. Strength and permeation properties of slag blended fly ash based geopolymer concrete10.4028/www.scientific.net/AMR.651.168 ↗
43. The wedge splitting test: influence of aggregate size and water-to-cement ratio. RILEM Transport Mechanisms in Cracked Concrete
44. Properties of fresh concrete containing large amounts of fly ash10.1016/0008-8846(86)90139-0 ↗
45. Hydration structure, and properties of blast furnace slag cements, mortars, and concrete
46. High-performance concrete-from buildings to bridges
47. Fatigue parameters of cement-based composites with various types of fibres
48. Shi · 2009
49. Siddique · 2011
50. Wedge-Splitting test–determination of minimal starting notch length for various cement based composites Part I: cohesive crack modelling
51. FE-Simulation of the Wedge-Splitting Test On High Strength Concrete (HSC)