journal article·2021-02

Hygrothermal performance comparison study on bamboo and timber construction in Asia-Pacific bamboo areas

Zujian Huang, Yimin Sun

Publisher page

Abstract

Abstract The hygrothermal feasibility is one of the premises for applying bamboo in building industry. This study carries out material property tests on typical bamboo variants and hygrothermal performance simulation on bamboo exterior wall constructions in the Asia-Pacific bamboo areas, and makes comparison with reference timber units in parallel. Results show that, except for bamboo particleboard, the rest bamboo variants have overall lower hygric properties and higher thermal properties, and some indicators of bamboo scrimber and bamboo mat board exceed the property range of the reference timber. The construction groups with bamboo particleboard as interior or (thickened) interlayer boards show overall better hygrothermal performance than those with timber units given the same construction and space size. For example, the annual total cooling demand and cooling peak are reduced by up to 14%, respectively. The combination of bamboo mat board and bamboo particleboard in bamboo groups shows better performance in most indicators than the combination of OSB and Spruce in timber groups. Thanks to the advantages of lower cost and technical requirement, bamboo particleboard and bamboo mat board have the potential to be local climate adaptive building materials and are competitive compared with the corresponding timber products. The multi-level comparison between bamboo and timber units in this study demonstrates the feasibility to ‘substitute timber with bamboo’ in terms of hygrothermal performance, identifies the dominant bamboo variants and offers suggestions on its market competition with timber.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bamboo properties and applications · Natural Fiber Reinforced Composites · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Bamboo: the gift of the gods
2. Huang · 2019
3. Qisheng, Zhang, Jiang Shenxue, Tang Yongyu. Industrial utilization on bamboo. International network for bamboo and rattan, 2002.
4. Production, environmental impact and mechanical properties of glubam10.1016/j.conbuildmat.2013.03.087 ↗
5. Bamboo reinforced prefabricated wall panels for low cost housing10.1016/j.jobe.2016.11.010 ↗
6. An environmental, economic and practical assessment of bamboo as a building material for supporting structures10.1016/j.conbuildmat.2005.02.023 ↗
7. Van der Lugt, Pablo, Design interventions for stimulating bamboo commercialization-Dutch Design meets bamboo as a replicable model (2008).
8. Experimental dynamic characterization of a new composite glubam-steel truss structure
9. Screw withdrawal capacity of full-culm P. edulis bamboo10.1016/j.conbuildmat.2019.05.009 ↗
10. Creep behaviour of bamboo10.1016/j.conbuildmat.2014.05.024 ↗
11. Engineered bamboo scrimber: influence of density on the mechanical and water absorption properties10.1016/j.conbuildmat.2016.10.069 ↗
12. Evaluation of the mechanical properties of cross laminated bamboo panels by digital image correlation and finite element modelling
13. Thermal insulation performance of bamboo-and wood-based shear walls in light-frame buildings10.1016/j.enbuild.2018.03.017 ↗
14. Thermal and energy performance of a steel-bamboo composite wall structure10.1016/j.enbuild.2017.09.083 ↗
15. Specific heat capacity measurement of Phyllostachys edulis (Moso bamboo) by differential scanning calorimetry10.1016/j.conbuildmat.2016.08.103 ↗
16. Thermal conductivity of engineered bamboo composites10.1007/s10853-015-9610-z ↗
17. Water vapour diffusion resistance factor of Phyllostachys edulis (Moso bamboo)10.1016/j.conbuildmat.2017.02.156 ↗
18. Water adsorption properties of bamboo in the longitudinal direction10.1007/s00226-008-0225-2 ↗
19. Experimental and theoretical study on thermal and moisture characteristics of new-type bamboo structure wall10.1007/s11771-012-1045-y ↗
20. Timber construction manual
21. W. Liese, Anatomy of bamboo, Bamboo research in Asia: proceedings of a workshop held in Singapore, 28-30 May 1980. IDRC, Ottawa, ON, CA, 1980.
22. Liese, Walter, Michael Köhl, (Eds.) Bamboo: the plant and its uses. Springer, 2015.10.1007/978-3-319-14133-6 ↗
23. Experimental study on bamboo hygrothermal properties and the impact of bamboo-based panel process10.1016/j.conbuildmat.2017.08.133 ↗
24. Hygrothermal performance optimization on bamboo building envelope in Hot-Humid climate region10.1016/j.conbuildmat.2019.01.039 ↗
25. Künzel, Hartwig M, Simultaneous heat and moisture transport in building components, One-and two-dimensional calculation using simple parameters. IRB-Verlag Stuttgart 65 (1995).
26. Liu, Xianmiao, et al., Nomenclature for engineered bamboo, (2016).
27. DIN EN 1936-2007: Natural stone test method - Determination of real density and apparent density, and of total and open porosity.
28. ISO 11357-4-2005: Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity.
29. ISO 8302-1991: Thermal insulation; determination of steady-state thermal resistance and related properties; guarded hot plate apparatus.
30. ISO 12571:2012: Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties.
31. ISO 15148:2002(E): Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion.
32. ISO 12572:2001(E): Hygrothermal performance of building materials and products - Determination of water vapour transmission properties.
33. Y. Xiao, et al., Glue laminated bamboo (GluBam) for structural applications, Materials and Joints in Timber Structures. Springer, Dordrecht, 2014, pp. 589–601.10.1007/978-94-007-7811-5_54 ↗
34. Li, Zhi, et al., Lightweight woodframe shear walls with ply-bamboo sheathings, Appl. Mech. Mater. Vol. 847. Trans Tech Publications Ltd, 2016.10.4028/www.scientific.net/AMM.847.529 ↗
35. Yang, YuMing, ChaoMao Hui, China's bamboo-culture/resources/cultivation/utilization, Technical Report-International Network for Bamboo and Rattan (INBAR) 33 (2010).
36. Sedlbauer, Klaus, Prediction of mould fungus formation on the surface of and inside building components, Fraunhofer Institute for Building Physics (2001).