Long-term analysis of the physical properties of the mixed recycled aggregate and their effect on the properties of mortars
Source abstract
Abstract
Abstract The use of mixed recycled aggregates (MRA) for the production of cementitious materials is still limited due to the high heterogeneity of the rubble sources and the lack of specific regulations, which contributes to maintaining the problems associated with the management of construction and demolition waste (CDW) in recycling plants. Therefore, this paper investigates the influence and effects of the use of MRA, collected over time, on the physical and mechanical properties of cement and lime-based mortars, based on a statistical modelling using Machine Learning algorithms. For this purpose, an extensive experimental programme with three stages was developed, intending to evaluate the variability of the MRA produced. The first phase consisted of the physical characterization tests of 36 samples of MRA. The second phase intended to perform technological tests to select the best volumetric ratio of cement: hydrated-lime: MRA (1:1:6, 1:1:7 or 1:2:9) to be used with 100% MRA (modified mortars). Finally, the third experimental phase investigated the physical and mechanical properties of the modified mortars produced with the volume ratio selected in the previous phase and using MRA collected at different periods of time. The results obtained were analysed using a T hypothesis test, a joint analysis of all variables using a Robust Principal Components Analysis (ROBPCA) and a partner recognition model based on data driven and ROBPCA (Data Driven Soft Independent Modelling of Class Analogy - DD-SIMCA). From the results, it was noticed that MRA 1:1:6 mortars presented a better performance in terms of mechanical strengths and water absorption by capillary, due to the filler effect of the MRA. As a matter of fact, the statistical tests have proven that no statistically significant differences were found in the physical properties of the 36 MRA samples and among the physical and mechanical properties of mortars in these periods investigated, which demonstrates the potentially reproducibility of CDW. Therefore, it was found that a proper selection and processing of CDW, as well as a definition of efficient mixing ratios can minimize the effects from the high heterogeneity of these wastes and enable the effective use of MRA in mortars.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Waste generated in high-rise buildings construction: A current situation in Thailand10.1016/j.egypro.2017.10.186 ↗
2. A. Turkyilmaz, M. Guney, F. Karaca, Z. Bagdatkyzy, A. Sandybayeva, G. Sirenova, A Comprehensive Construction and Demolition Waste Management Model using PESTEL and 3R for Construction Companies Operating in Central Asia, Sustainability. 11 (2019) 1593. Doi: 10.3390/su11061593.10.3390/su11061593 ↗
3. Technological and environmental comparative of the processing of primary sludge waste from paper industry for mortar10.1016/j.jclepro.2019.119336 ↗
4. Analysis of the compactness and properties of the hardened state of mortars with recycling of construction and demolition waste (CDW)10.1016/j.jmrt.2020.03.122 ↗
5. R.K. Dhir, J. de Brito, R. V. Silva, C.Q. Lye, Properties and Composition of Recycled Aggregates, 2019. Doi: 10.1016/b978-0-08-100985-7.00005-4.10.1016/B978-0-08-100985-7.00005-4 ↗
6. Performance of cementitious renderings and masonry mortars containing recycled aggregates from construction and demolition wastes10.1016/j.conbuildmat.2015.12.171 ↗
7. Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production10.1016/j.conbuildmat.2014.04.117 ↗
8. Availability and processing of recycled aggregates within the construction and demolition supply chain: A review10.1016/j.jclepro.2016.12.070 ↗
9. The effect of multi-recycling on the mechanical performance of coarse recycled aggregates concrete10.1016/j.conbuildmat.2018.07.178 ↗
10. Rendering mortars with incorporation of very fine aggregates from construction and demolition waste10.1016/j.conbuildmat.2019.116844 ↗
11. Fine ceramics replacing cement in mortars Partial replacement of cement with fine ceramics in rendering mortars10.1617/s11527-007-9332-z ↗
12. The role of powder content of the recycled aggregates of CDW in the behaviour of rendering mortars10.1016/j.conbuildmat.2019.03.058 ↗
13. Experimental investigation on the variability of the main mechanical properties of concrete produced with coarse recycled concrete aggregates10.1016/j.conbuildmat.2018.12.200 ↗
14. Reliability Analysis for Flexural Capacity of Recycled Aggregate Concrete Beams10.2749/101686616X14555428758920 ↗
15. Structural reliability of bonding between steel rebars and recycled aggregate concrete10.1016/j.conbuildmat.2013.05.017 ↗
16. R.L. da S. Ferreira, M.A.S. Anjos, E.F. Ledesma, J.E.S. Pereira, A.K.C. Nóbrega, Evaluation of the physical-mechanical properties of cement-lime based masonry mortars produced with mixed recycled aggregates, Mater. Construcción. 70 (2020) 210. Doi: 10.3989/mc.2020.02819.10.3989/mc.2020.02819 ↗
17. S. Roque, C. Maia Pederneiras, C. Brazão Farinha, J. de Brito, R. Veiga, Concrete-Based and Mixed Waste Aggregates in Rendering Mortars, Materials (Basel). 13 (2020) 1976. Doi: 10.3390/ma13081976.10.3390/ma13081976 ↗
18. Maximum feasible use of recycled sand from construction and demolition waste for eco-mortar production – Part-I: ceramic masonry waste10.1016/j.jclepro.2014.10.084 ↗
19. Avaliação das propriedades físicas, químicas e mineralógicas da fração fina (<150 µm) do agregado reciclado de RCD10.1590/0366-69132019653732453 ↗
20. Effects of water to cement ratio, recycled fine aggregate and air entraining/plasticizer admixture on masonry mortar properties10.1016/j.conbuildmat.2019.116929 ↗
21. Properties of cement–lime mortars vs. cement mortars containing recycled concrete aggregates10.1016/j.conbuildmat.2015.03.042 ↗
22. Comparative study of three types of fine recycled aggregates from construction and demolition waste (CDW), and their use in masonry mortar fabrication10.1016/j.jclepro.2016.01.059 ↗
23. The role of aggregate characteristics on the performance optimization of high hydraulicity restoration mortars10.1016/j.conbuildmat.2017.07.134 ↗
24. Recycling paper industry effluent sludge for use in mortars: A sustainability perspective10.1016/j.jclepro.2018.05.011 ↗
25. M. Hubert, P.J. Rousseeuw, K. Vanden Branden, ROBPCA: A New Approach to Robust Principal Component Analysis, Technometrics. 47 (2005) 64–79. Doi: 10.1198/004017004000000563.10.1198/004017004000000563 ↗
26. DD-SIMCA – A MATLAB GUI tool for data driven SIMCA approach10.1016/j.chemolab.2017.05.010 ↗
27. Nearest neighbor selection for iteratively kNN imputation10.1016/j.jss.2012.05.073 ↗
28. An evaluation of the recycled aggregate characteristics and the recycled aggregate concrete mechanical properties10.1016/j.conbuildmat.2019.117978 ↗
29. Production of recycled sand from construction and demolition waste10.1016/j.conbuildmat.2012.02.004 ↗
30. H. Hafez, R. Kurda, R. Kurda, B. Al-Hadad, R. Mustafa, B. Ali, A Critical Review on the Influence of Fine Recycled Aggregates on Technical Performance, Environmental Impact and Cost of Concrete, Appl. Sci. 10 (2020) 1018. Doi: 10.3390/app10031018.10.3390/app10031018 ↗
31. Eco-friendly mortars with addition of ornamental stone waste - A mathematical model approach for granulometric optimization10.1016/j.jclepro.2019.119283 ↗
32. S.C. Angulo, V.M. John, C. Ulsen, H. Kahn, Caracterização de agregados de construção e demolição reciclados separados por líquidos densos, I Conferência Latino-Americana Construção Sustentável X Encontro Nac. Tecnol. Do Ambient. Construído. (2004).
33. C.M. Pederneiras, M.D.P. Durante, Ê.F. Amorim, R.L. da S. Ferreira, Incorporation of recycled aggregates from construction and demolition waste in paver blocks, Rev. IBRACON Estruturas e Mater. 13 (2020) 1–13. Doi: 10.1590/s1983-41952020000400005.10.1590/s1983-41952020000400005 ↗
34. Evaluation of mechanical properties and carbonation of mortars produced with construction and demolition waste10.1016/j.conbuildmat.2017.11.089 ↗
35. C. Neno, J. de Brito, R. Veiga, Using fine recycled concrete aggregate for mortar production, Mater. Res. 17 (2014) 168–177. Doi: 10.1590/S1516-14392013005000164.10.1590/S1516-14392013005000164 ↗
36. Tensile bond strength of lime-based mortars: The role of the microstructure on their performance assessed by a new non-standard test method10.1016/j.jobe.2019.101136 ↗
37. Water distribution modelling of capillary absorption in cementitious materials10.1016/j.conbuildmat.2019.05.023 ↗
38. Behaviour of cementitious mortars containing different kinds of recycled aggregate10.1016/j.conbuildmat.2007.12.006 ↗
39. G. Moriconi, V. Corinaldesi, R. Antonucci, Environmentally-friendly mortars : a way to improve bond between mortar and brick, 36 (2003) 702–708.10.1007/BF02479505 ↗
40. CDW recycled aggregate renderings: Part II – Analysis of the effect of materials finer than 75μm under accelerated aging performance10.1016/j.conbuildmat.2005.02.026 ↗
41. Influence of pre-soaked recycled fine aggregate on the properties of masonry mortar10.1016/j.conbuildmat.2014.07.098 ↗
42. Mechanical behavior of masonry assemblages manufactured with recycled-aggregate mortars10.1016/j.cemconcomp.2009.05.003 ↗
43. Evolution of the microstructure of lime based mortars and influence on the mechanical behaviour: The role of the aggregates10.1016/j.conbuildmat.2018.07.223 ↗
44. Pre-normative research on the use of mixed recycled aggregates in unbound road sections10.1016/j.conbuildmat.2010.12.018 ↗
45. Use of fine recycled aggregates from ceramic waste in masonry mortar manufacturing10.1016/j.conbuildmat.2012.11.036 ↗
46. Recycling of construction and demolition waste for producing new construction material (Brazil case-study)10.1016/j.conbuildmat.2016.07.044 ↗
47. E.B. Zanelato, J. Alexandre, A.R.G Azevedo, M.T. Marvila, Evaluation of roughcast on the adhesion mechanisms of mortars on ceramic substrates, Mater. Struct. 52 (2019) 232-240. Doi: 10.1617/s11527-019-1353-x.10.1617/s11527-019-1353-x ↗