Enhanced corrosion protection of reinforcement steel with nanomaterial incorporated fly ash based cementitious coating
Source abstract
Abstract
Abstract This work evaluated the performance of a novel nanophase modified fly ash based cement polymer coating over steel reinforcements in a corrosive environment. Five types of coatings were prepared with 100 wt. % Ordinary Portland Cement (CC), OPC replaced with 40 wt. % fly ash (CF), and CF admixed with 2 wt. % nano-CaCO3 (CFC), nano-SiO2 (CFS) and nano-ZrO2 (CFZ). Electrochemical studies were carried out under exposure to chlorides and the long term performance was evaluated by impressed voltage test. The microstructure of the developed coatings and chemical composition of corrosion products were analyzed using SEM, XRD, and LRS. The instantaneous corrosion rates of CFC, CFS, and CFZ coated rebars were found to be notably lower than CF coated rebars. The accelerated studies using impressed voltage test indicated a significantly longer initiation time for cracking in nanomaterials incorporated coatings than the conventional cement polymer coating. The evaluation of electrochemical parameters like open circuit potential, corrosion current, and polarization resistance showed that the addition of nano-ZrO2 significantly enhanced the corrosion performance of cementitious coatings as compared to other nanomaterials owing to its better dispersibility, without aggregation in cementitious product, which was further confirmed from the particle size distribution measurement using dynamic light scattering technique. The XRD patterns and laser Raman spectra results confirm negligible corrosion products on CFZ coated rebars. The visual inspection of rust formation and weight loss measurements of CFZ coated rebars, subjected to salt spray and chemical resistance tests corroborated its long term durability in chloride-rich environment. Our results suggest the important benefits of nanomaterial incorporated fly ash cementitious coating on rebars in corrosion protection.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Electrochemical behavior of mild and corrosion resistant concrete reinforcing steels10.1016/j.conbuildmat.2019.117205 ↗
2. Investigation of passive layer formation on steel rebars in foamed concrete10.1002/maco.201810663 ↗
3. Effect of anti corrosive coatings to steel – a state of art report
4. Long-term durability properties of alkali-activated binders containing slag, fly ash, palm oil fuel ash and rice husk ash10.1016/j.conbuildmat.2020.119094 ↗
5. Effect of surface preparation on corrosion of steel rebars coated with cement-polymer-composites (CPC) and embedded in concrete10.1016/j.conbuildmat.2019.117616 ↗
6. Study on polymer modified cement-based coating with healing effect on rusty carbon steel10.1155/2014/628191 ↗
7. Corrosion of basaltic pumice, colemanite, barite and blast furnace slag coated rebars in concretes10.1016/j.conbuildmat.2012.07.030 ↗
8. Inhibited and sealed slurry coating od steel rebar – a state of art report
9. Microstructure and strength development of quaternary blend high-volume fly ash concrete10.1007/s10853-020-04473-1 ↗
10. Effect of nanoparticles on the anticorrosion and mechanical properties of epoxy coating10.1016/j.surfcoat.2009.06.048 ↗
11. Effect of ecofriendly sealing coat against corrosion protection of steel rebars in concrete10.1179/1743278213Y.0000000133 ↗
12. Corrosion protection mechanisms of carbon nanotube and zinc-rich epoxy primers on carbon steel in simulated concrete pore solutions in the presence of chloride ions10.1016/j.corsci.2016.03.023 ↗
13. Application of nano-SiO2 and nano-Fe2O3 for protection of steel rebar in chloride contaminated concrete: epoxy nanocomposite coatings and nano-modified mortars10.1166/jnn.2017.12396 ↗
14. Thermal, mechanical and antibacterial properties of water-based acrylic Polymer/SiO2–Ag nanocomposite coating10.1016/j.matchemphys.2019.05.001 ↗
15. Hydrothermal synthesis of cobalt doped magnetite nanoparticles for corrosion protection of epoxy coated reinforced steel10.1166/jnn.2020.17413 ↗
16. Effect of nano-SiO2, nano-Al2O3 and nano-Fe2O3 powders on compressive strengths and capillary water absorption of cement mortar containing fly ash: A comparative study10.1016/j.enbuild.2012.12.014 ↗
17. Microstructure and durability properties of cement mortars containing nano-TiO2 and rice husk ash10.1016/j.conbuildmat.2016.03.136 ↗
18. Effects of nano-silica and nano-limestone on flowability and mechanical properties of ultra-high-performance concrete matrix10.1016/j.conbuildmat.2015.05.137 ↗
19. Properties of concrete incorporating different nano silica particles10.1080/14328917.2019.1616140 ↗
20. The significance of dispersion of nano-SiO2 on early age hydration of cement pastes10.1016/j.matdes.2019.108320 ↗
21. Low dosage nano-silica modification on lightweight aggregate concrete10.1177/1847980418761283 ↗
22. D.A. Koleva, An Innovative Approach to Control Steel Reinforcement Corrosion by Self-Healing, Materials 11 (2018) 309, https://doi.org/10.3390/ma11020309.10.3390/ma11020309 ↗
23. Effect of nano-calcium carbonate on early-age properties of ultra-high-performance concrete10.1680/macr.12.00015 ↗
24. Nanoparticles for enhancing mechanical properties of fly ash concrete
25. Corrosion performance of coated reinforcing bars embedded in concrete and exposed to natural marine environment10.1016/j.porgcoat.2006.01.011 ↗
26. Performance evaluation of protective coatings on steel rebars
27. Electrochemical behaviour of steel reinforced concrete during accelerated corrosion testing10.5006/1.3287722 ↗
28. IS 12269, Ordinary Portland Cement 53 Grade – specifications, Bureau of Indian Standards, New Delhi, 2013.
29. IS 3812 (part 1), Pulverized fuel ash — specification : Part 1 for use as pozzolana in cement, cement mortar and concrete, Bureau of Indian Standards, New Delhi, 2013.
30. IS 383, Coarse and fine aggregate for concrete – specifications, Bureau of Indian Standards, New Delhi, 2016.
31. Assessment of long term stability of aqueous nanofluids using different experimental techniques10.1016/j.molliq.2016.07.051 ↗
32. Influence of Ag + interaction on 1D droplet array spacing and the repulsive forces between stimuli-responsive nanoemulsion droplets10.1021/la5022802 ↗
33. ASTM A775/A775M -19, Standard specification for epoxy-coated steel reinforcing bars, ASTM International, West Conshohocken, PA, 2019.
34. Service life and life cycle assessment of reinforced concrete systems with limestone calcined clay cement (LC3)10.1016/j.cemconres.2018.11.019 ↗
35. Corrodibility and adherence of reinforced concrete rebars electroplated with zinc and zinc-nickel alloys10.1590/1980-5373-mr-2018-0915 ↗
36. ASTM G1 – 03,Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens, 2017.
37. H.W. Song, V. Saraswathy, S. Muralidharan, C.-H. Lee1, K. Thangavel, Corrosion performance of steel in composite concrete system admixed with chloride and various alkaline nitrites, Corros. Eng. Sci. Techn. 44 (6) (2009), https://doi.org/10.1179/174327809X397848.10.1179/174327809X397848 ↗
38. ASTM C311 – 05, Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete, 2006.
39. A. Berradja, Electrochemical Techniques for Corrosion and Tribocorrosion Monitoring: Methods for the Assessment of Corrosion Rates, Corrosion Inhibitors (2019).10.5772/intechopen.86743 ↗
40. Investigation on the polarization resistance of steel embedded in highly resistive cementitious systems – an attempt and challenges10.1016/j.electacta.2019.03.200 ↗
41. Performance evaluation of rebar in chloride contaminated concrete by corrosion rate10.1016/j.conbuildmat.2008.11.003 ↗
42. Enhanced seawater corrosion resistance of reinforcement in nanophase modified fly ash concrete10.1016/j.conbuildmat.2019.06.070 ↗
43. ASTM G102 – 89 e1, Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements, 2015.
44. Monitoring corrosion rate for ordinary portland concrete (OPC) and high-performance concrete (HPC) specimens subjected to chloride attack10.1139/l02-091 ↗
45. ASTM C876-15 · 2015
46. Fungal resistance of nanomodifiers and corrosion inhibitor amended fly ash concrete10.1016/j.ibiod.2019.104725 ↗
47. Effect of salt spray corrosion exposure on the mechanical performance of different technical class reinforcing steel bars10.1016/j.matdes.2006.07.017 ↗
48. ASTM B117-19 · 2019
49. IS 13620 Annex A (Reaffirmed in 2004) · 2004 · 2019
50. ASTM G20–10 · 2019
51. High performance green concrete (HPGC) with improved strength and chloride ion penetration resistance by synergistic action of fly ash, nanoparticles and corrosion inhibitor10.1016/j.conbuildmat.2018.11.266 ↗
52. Effect of prior damage on the performance of cement based coatings on rebar: macrocell corrosion studies10.1016/S0958-9465(00)00041-X ↗
53. Application of electrochemical impedance spectroscopy (EIS) to monitor the corrosion of reinforced concrete: a new approach10.1016/j.conbuildmat.2016.02.047 ↗
54. Novel anticorrosive pigments based on waste material for corrosion protection of reinforced concrete steel10.1016/j.conbuildmat.2015.08.111 ↗
55. Performance evaluation of polyaniline pigmented epoxy coating for corrosion protection of steel in concrete environment10.1016/j.porgcoat.2007.03.002 ↗
56. Corrosion rate of ordinary and high-performance concrete subjected to chloride attack by AC impedance spectroscopy10.1016/j.conbuildmat.2005.01.062 ↗
57. Effect of nano-CaCO3 on the mechanical properties and durability of concrete incorporating fly ash10.1155/2020/7365862 ↗
58. A. Nazari, S. Riahi, The effects of ZrO2 nanoparticles on strength assessments and water permeability of concrete in different curing media. Mater. Sci. Eng. A 528(3) (2011) 1173–1182, https://doi.org/10.1080/17458080.2011.586369.10.1016/j.msea.2010.09.099 ↗
59. Improvement in corrosion resistance of recycled aggregate concrete by nano silica suspension modification on recycled aggregates10.1016/j.cemconcomp.2019.103476 ↗
60. In situ Raman spectroscopic analysis on carbon steel, immersed in aqueous solutions at different pH and anions10.1007/s11665-020-04805-x ↗
61. Formation of Goethite and Magnetite Rust via Reaction with Fe(II)10.1149/2.0291606jes ↗
62. Characterisation of rust surfaces formed on mild steel exposed to marine atmospheres using XRD and SEM/Micro-Raman techniques10.1016/j.corsci.2016.04.034 ↗
63. A micro-Raman spectroscopic study of marine atmospheric corrosion of carbon steel: the effect of akaganeite10.1149/2.0881509jes ↗
64. Effect of nano-CaCO3 and nano-SiO2 on improving the properties of carbon fibre-reinforced concrete and their pore-structure models10.1016/j.conbuildmat.2020.118297 ↗
65. Using nano-silica to improve mechanical and fracture properties of fiber-reinforced high-volume fly ash cement mortar10.1016/j.conbuildmat.2019.117853 ↗
66. Effect of nano-SiO2 on the mechanical properties, microstructure, and hydration process of cementitious materials incorporating hydrophobic admixture10.1061/(ASCE)MT.1943-5533.0003084 ↗
67. Clifton, James, Beeghly, Hugh, Mathley, Robert, Nonmetallic coatings for concrete reinforcing bars. Natl. Bur. Stand. Build. Sci. Ser, (1975).10.6028/NBS.BSS.65 ↗
68. Polymer/Inorganic nanocomposite coatings with superior corrosion protection performance: a review10.1016/j.jiec.2020.04.029 ↗