journal article·2021-02

Preparation and experimental study on the thermal characteristics of lightweight prefabricated nano-silica aerogel foam concrete wallboards

Peng Liu, Yan Feng Gong, Guo Hua Tian, Zheng Kun Miao

Publisher page

Abstract

Abstract The optimal mix ratio of nano-silica aerogel foam concrete was determined through preliminary design and orthogonal experiment optimization. Based on the design of the size, reinforcement, and interface form of the prefabricated wallboard, a prefabricated foam concrete wallboard which met the requirements for use in the cold region (B region) of China was developed. The dry bulk density, thermal conductivity, compressive strength, and porosity were tested respectively. Besides, the microscopic characteristics of the foam concrete were tested through scanning electron microscopy(SEM). The thermal characteristics of the wallboard were tested under steady-state and unsteady-state conditions. The heat transfer coefficient is 0.5518 W/(m2·K) under steady-state conditions. The test results are that the temperature amplitudes of the inside and outside wall surfaces are 5.2℃ and 0.054℃ respectively, the temperature attenuation multiple and attenuation coefficient are 96.3, 0.0104, The delay time of the wall surface is up to 11.8 h, the heat storage coefficient of the surface is 2.48 W/(m2·K), thermal inertia index is 4.15, tested by using self-designed test device, and the periodic variation of sol–air temperature of Xuzhou area in summer is taken as boundary conditions. It shows that the developed wallboards have good thermal characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aerogels and thermal insulation · Building materials and conservation · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Energy saving potential in current and future world built environments based on the adaptive comfort approach10.1016/j.jclepro.2019.119306 ↗
2. Tests on high-performance aerated concrete with a lower density10.1016/j.conbuildmat.2014.10.030 ↗
3. Improving the energy efficiency in buildings while reducing the waste using autoclaved aerated concrete made from power industry waste10.1016/j.enbuild.2012.10.029 ↗
4. 13th-Five Year Plan of Building Energy Conservation and Green Building Development” (PLAN) Ministry of housing and Urban-Rural Development of the people’s Republic of china.2017. http://www.mohurd.gov.cn/wjfb/201703/t20170314_230978.html
5. Experimental investigation on foam concrete without and with recycled glass powder: A sustainable solution for future construction10.1016/j.conbuildmat.2018.12.178 ↗
6. Thermal transfer and moisture resistances of nano-aerogel-embedded foam concrete10.1016/j.conbuildmat.2019.117575 ↗
7. Effect of foaming gas and cement type on the thermal conductivity of foamed concrete10.1016/j.conbuildmat.2019.117197 ↗
8. Physical and functional characteristics of foam concrete: A review10.1016/j.conbuildmat.2019.06.052 ↗
9. Experimental investigations of aerogel-incorporated ultra-high performance concrete10.1016/j.conbuildmat.2014.12.064 ↗
10. Experimental investigation on foam concrete without and with recycled glass powder: A sustainable solution for future construction10.1016/j.conbuildmat.2018.12.178 ↗
11. A comparative embodied energy analysis of a house with recycled expanded polystyrene (EPS) based foam concrete wall panels10.1016/j.enbuild.2016.11.044 ↗
12. Experimental study on mechanical and waterproof performance of lightweight foamed concrete mixed with crumb rubber10.1016/j.conbuildmat.2019.03.157 ↗
13. Silica aerogel; synthesis, properties and characterization10.1016/j.jmatprotec.2007.10.060 ↗
14. Toward aerogel based thermal superinsulation in buildings: A comprehensive review10.1016/j.rser.2014.03.017 ↗
15. Thermal conductivity measurement of thermal insulating mortars with EPS and silica aerogel by steady-state and transient methods10.1016/j.conbuildmat.2018.03.162 ↗
16. Preparation and optimization of ultra-light and thermal insulative aerogel foam concrete10.1016/j.conbuildmat.2019.01.212 ↗
17. Numerical and experimental study on the thermal performance of aerogel insulating panels for building energy efficiency10.1016/j.renene.2019.01.120 ↗
18. Aerogel-incorporated concrete: An experimental study10.1016/j.conbuildmat.2013.10.100 ↗
19. Thermal transfer and moisture resistances of nano-aerogel-embedded foam concrete10.1016/j.conbuildmat.2019.117575 ↗
20. Factors influencing the application of prefabricated construction in China: From perspectives of technology promotion and cleaner production10.1016/j.jclepro.2019.02.110 ↗
21. A comparative study of environmental performance between prefabricated and traditional residential buildings in China10.1016/j.jclepro.2015.04.120 ↗
22. Barriers to promoting prefabricated construction in China: A cost–benefit analysis10.1016/j.jclepro.2017.10.171 ↗
23. SCC (The State Council of the People’s Republic of China) Some Opinions of the CPC Central Committee and the State Council on Further Strengthening the Management of Urban Planning and Construction SCC, Beijing (2016)
24. Structural performance of lightweight steel-foamed concrete–steel composite walling system under compression10.1016/j.tws.2010.08.007 ↗
25. Analysis of partially composite foam insulated concrete sandwich structures10.1016/j.engstruct.2015.02.033 ↗
26. Energy efficient retrofit of a prefabricated concrete panel building (Plattenbau) in Berlin by applying an aerogel based rendering to its façades10.1016/j.enbuild.2018.01.050 ↗
27. Experimental and numerical investigations of thermal properties of insulated concrete sandwich panels with fiberglass shear connectors10.1016/j.enbuild.2017.04.007 ↗
28. A comparative embodied energy analysis of a house with recycled expanded polystyrene (EPS) based foam concrete wall panels10.1016/j.enbuild.2016.11.044 ↗
29. Ministry of housing and Urban-Rural Development, PRC. Design standard for energy efficiency of residential buildings in severe cold and cold zones JGJ26-2018[S]. Beijing: China Building Materials Press, 2019. http://www.mohurd.gov.cn/wjfb/201508/t20150830_224380.html
30. Ministry of Housing and Urban-Rural Development, PRC. Technical specification for application of foamed concrete JGJ/T 341-2014 [S]. Beijing: China Construction Industry Press, 2015.
31. Ministry of Housing and Urban-Rural Development of the People’s Republic of China. Foam concrete. JG/T-266-2011[M]. 2011:14.
32. Experimental investigation on recycled clay brick powder as a sand replacement in LFC
33. Ministry of Housing and Urban-Rural Development, PRC. Construction of Autoclave Aerated Concrete Blocks and Slabs (13J104)[S]. Beijing: China Planning Press, 2015
34. Ministry of Industry and Information Technology, Performance Test Methods for Foamed Concrete Products. JC/T 2357-2016[S], China Building Materials Press, 2016, Beijing.
35. Guide to the Expression of Uncertainty in Measurement, International Organization for Standardization (ISO), 1993, doi: 10.1088/0026-1394/43/4/S01.10.1088/0026-1394/43/4/S01 ↗
36. General Administration of Quality Supervision, Inspection and Quarantine of China (AQSIQ),
37. Weiming · 2011 · 82
38. Energysaving wall’s frequence response to outdoor sol- airtemperature under the climate of Lhasa area
39. Zhou, G., et al., Thermal characteristics of shape-stabilized phase change material wallboard with periodical outside temperature waves. Applied Energy, 2010. 87(8): p. 2666-2672.10.1016/j.apenergy.2010.02.001 ↗
40. Yang, L., et al., A kind of PCMs-based lightweight wallboards: Artificial controlled condition experiments and thermal design method investigation. Building and Environment, 2018. 144: p. 194-207.10.1016/j.buildenv.2018.08.020 ↗
41. Effects of wall's insulation thickness and position on time lag and decrement factor10.1016/S0378-7788(98)00030-9 ↗
42. Numerical computation of time lags and decrement factors for different building materials10.1016/j.buildenv.2005.02.020 ↗
43. Yearly analysis of peak temperature, thermal amplitude, time lag and decrement factor of a building envelope in tropical climate10.1016/j.jobe.2020.101459 ↗
44. Dynamic thermal performance of conventional and Dynamic thermal performance of conventional and alternative building wall envelopes10.1016/j.jobe.2018.11.002 ↗
45. hua Tian G, lin Lv H, en Huang J, et al., Experimental study on the thermal performance of a wall coated with a phase-change, energy-storing mortar layer during summer. Applied Thermal Engineering, 2017, 124: p. 279-285.10.1016/j.applthermaleng.2017.05.178 ↗
46. Thermal performance evaluation of the wall using heat flux time lag and decrement factor10.1016/j.enbuild.2011.12.010 ↗
47. A foamed cement blocks with paraffin/expanded graphite composite phase change solar thermal absorption material10.1016/j.solmat.2019.110038 ↗