Stabilization of PET plastic-demolition waste blends using fly ash and slag-based geopolymers in light traffic road bases/subbases
Source abstract
Abstract
Abstract Polyethylene terephthalate (PET) plastic and construction and demolition (C&D) wastes contribute to a substantial fraction of the annual landfilling waste composition of the world. Substituting traditional road construction materials with PET/C&D blends is a sustainable solution for the increasing landfilling requirement and increasing demand for the natural quarry aggregates. This study evaluates the main geotechnical parameters of the geopolymer-stabilized blends comprising of two main C&D types, namely recycled concrete aggregate (RCA) and crushed brick (CB), in blends with 5% PET fragments (% by mass). 10%Fly ash (FA), 10%Slag (S) and 5%FA + 5%S were used as the precursors at a fixed liquid activator to precursor ratio of 0.4, and the alkaline activator for the geopolymer solution was comprised of 30:70 ratio of liquid NaOH:Na2SiO3 solution. Strength and stiffness characteristics of the stabilized blends were evaluated by unconfined compressive strength (UCS) tests. The resilient modulus (MR) values of the geopolymer-stabilized blends under different cyclic axial stresses and confining stresses were assessed by repeated load triaxial (RLT) tests. Bulk stress and three-parameter model parameters were determined from the RLT test data to predict the variation of MR of the geopolymer-stabilized PET/C&D blends. All the geopolymer-stabilized blends using 5%FA + 5%S and 10%S as precursors satisfied the minimum UCS limit of the granular materials for light traffic road bases/subbases. Geopolymer-stabilized PET/C&D was identified as a potential, sustainable option for the stabilization of upcoming road bases/subbases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Current state and future prospects of plastic waste as source of fuel: A review10.1016/j.rser.2015.04.063 ↗
2. A.L. Brooks S. Wang J.R. Jambeck 4 6 2018 eaat0131 10.1126/sciadv.aat0131.10.1126/sciadv.aat0131 ↗
3. Characterisation of recycled mixed plastic solid wastes: Coupon and full-scale investigation10.1016/j.wasman.2015.11.017 ↗
4. Marine pollution. Plastic waste inputs from land into the ocean10.1126/science.1260352 ↗
5. PET bottles recycling in China: An LCA coupled with LCC case study of blanket production made of waste PET bottles10.1016/j.jenvman.2019.110062 ↗
6. An overview on PET waste recycling for application in packaging10.1007/s12588-016-9164-1 ↗
7. Recycled polyethylene terephthalate as a new FFF feedstock material10.1016/j.addma.2018.03.007 ↗
8. “Life cycle energy and GHG emissions of PET recycling: change-oriented effects,” The10.1007/s11367-011-0296-4 ↗
9. Evaluation of shear strength properties of unbound PET plastic in blends with demolition wastes
10. Utilizing recycled PET blends with demolition wastes as construction materials10.1016/j.conbuildmat.2019.06.047 ↗
11. Sustainability Victoria, “Victorian Recycling Industry Annual Report 2016-17,” Melbourne, 2018.
12. Construction and demolition waste generation and management in Lisbon (Portugal)10.1016/j.resconrec.2011.06.010 ↗
13. Stiffness and flexural strength evaluation of cement stabilized PET blends with demolition wastes10.1016/j.conbuildmat.2019.117819 ↗
14. A. Mohammadinia A. Arulrajah J. Sanjayan M.M. Disfani M. Win Bo S. Darmawan 28 7 2016 04016033 10.1061/(ASCE)MT.1943-5533.0001526.10.1061/(ASCE)MT.1943-5533.0001526 ↗
15. Texas Department of Transportation, “Texas Department of Transportation, Cement Treatment (Plant-Mixed), 2010. Item 276 Austin, TX,”, 2010.
16. “Strength development in soft marine clay stabilized by fly ash and calcium carbide residue based geopolymer,” (in English)10.1016/j.clay.2016.04.005 ↗
17. Comparative deflection hardening behavior of short fiber reinforced geopolymer composites10.1016/j.conbuildmat.2014.07.085 ↗
18. Effect of blast furnace slag grades on fly ash based geopolymer waste forms10.1016/j.fuel.2014.05.018 ↗
19. Geopolymer technology: The current state of the art10.1007/s10853-006-0637-z ↗
20. Influence of sodium silicate powder silica modulus for mechanical and chemical properties of dry-mix alkali-activated slag mortar10.1016/j.conbuildmat.2019.117354 ↗
21. The role of inorganic polymer technology in the development of ‘green concrete’10.1016/j.cemconres.2007.08.018 ↗
22. Coal fly ash as raw material for the manufacture of geopolymer-based products10.1016/j.wasman.2007.02.001 ↗
23. Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation10.1016/j.cemconres.2013.06.007 ↗
24. Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer10.1007/s10853-009-3934-5 ↗
25. Composition and microstructure of alkali activated fly ash binder: Effect of the activator10.1016/j.cemconres.2005.03.003 ↗
26. Hardening mechanisms of an alkaline-activated class F fly ash10.1016/S0008-8846(01)00571-3 ↗
27. “Strength development in clay-fly ash geopolymer,” (in English)10.1016/j.conbuildmat.2012.11.015 ↗
28. A. Mohammadinia A. Arulrajah J. Sanjayan M.M. Disfani M.W. Bo S. Darmawan 28 11 2016 04016141 10.1061/(ASCE)MT.1943-5533.0001652.10.1061/(ASCE)MT.1943-5533.0001652 ↗
29. ASTM D75, “Standard Practice for Sampling Aggregates, ASTM International, West Conshohocken, PA, 2014, www.astm.org,”, 2014.
30. AS-1289.3.6.1, “Methods of testing soils for engineering purposes, Method 3.6.1: Particle size distribution by sieving. AS-1289.3.6.1, New South Wales, Australia.,”, 2009.
31. AS 1726, “Geotechnical site investigations,”, 2017.
32. ASTM D2974-14, “Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils, ASTM International, West Conshohocken, PA, 2014, www.astm.org,”, 2014.
33. AS 1141.5, “Particle density and water absorption of fine aggregate Australian Standard 1141.5.1,”. Australian Standard, Sydney, NSW, Australia, 2000, (R2016).
34. AS 1141.6.1, “Particle density and water absorption of coarse aggregate,” in Weighing-in-water method, Sydney, NSW, Australia, 2000, (R2016).
35. British Standards Institution BS 812–105.1: Method for Determination of Particle Shape; Flakiness Index 1989 London UK.
36. ASTM C131 / C131M-14, “Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine, ASTM International, West Conshohocken, PA, 2006, www.astm.org,”, 2014.
37. ASTM D1557-12, “Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)), ASTM International, West Conshohocken, PA, 2012, www.astm.org,” 2012.
38. ASTM D5102-09, “Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures ,ASTM International, West Conshohocken, PA, 2009, www.astm.org,”, 2009.
39. AASHTO, “Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials AASHTO T 307-99,” in American Association of State Highway and Transportation Officials, Washington vol. T 307-99, American Association of State and Highway Transportation Officials, 2007.
40. “Resilient Moduli Response of Moderately Cement-Treated Reclaimed Asphalt Pavement Aggregates,” (in English)10.1061/(ASCE)MT.1943-5533.0000268 ↗
41. Texas Department of Transportation · 2013
42. D1241–15, “Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses,”
43. F. VicRoads, “Registration for Crushed Rock mixes, Code of Practice RC 500.02,” VicRoads Melbourne, 2017.
44. Geotechnical properties of waste excavation rock in pavement subbase applications10.1061/(ASCE)MT.1943-5533.0000419 ↗
45. W. C. Peters, “American mineralogist crystal structure database,” (in English), Choice, p. 139, Aug 2005 2019-08-13 2005.
46. AASHTO, Guide for design of pavement structures, 1993. Washington D.C.: The American Association of State Highway and Transportation Officials 1993.
47. Recycled plastic granules and demolition wastes as construction materials: Resilient moduli and strength characteristics10.1016/j.conbuildmat.2017.04.178 ↗