Effect of post-fire curing and silica fume on permeability of ultra-high performance concrete
Source abstract
Abstract
Abstract This paper investigates effects of post-fire curing and silica fume on permeability recovery of ultra-high performance concrete (UHPC). UHPC samples were heated to 200, 300, 600, and 900 °C. After cooled to ambient temperature, the samples were recurred in water for 28 days. Permeability, chemical composition, pore size distribution, and microstructure were measured and analyzed to reveal the post-fire curing mechanism. The results showed that permeability of the UHPC mixtures with and without silica fume decreased after 200 °C heating and increased after higher temperature exposure. The increase of permeability was mainly due to coarsening of microstructure and formation of microcracks. Permeability of the samples was recovered after 600 and 900 °C exposure and post-fire curing. The mixture without silica fume showed greater permeability recovery due to the newly formed Portlandite and C-S-H filled the fire-damaged microstructure effectively. However, with addition of silica fume, the loose Ettringite formed did not contribute to significant lowering of permeability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading10.1016/j.cemconcomp.2013.12.015 ↗
2. Influence of aggregate and curing regime on the mechanical properties of ultra-high performance fibre reinforced concrete (UHPFRC)10.1016/j.conbuildmat.2008.11.012 ↗
3. A review on ultra high performance concrete: Part II Hydration, microstructure and properties10.1016/j.conbuildmat.2015.08.095 ↗
4. Rheological properties of ultra-high-performance concrete—an overview10.1016/j.cemconres.2019.105828 ↗
5. P. Buitelaar, Heavy reinforced ultra high performance concrete, Proceedings of the Int. Symp. on UHPC, Kassel, Germany, 2004, pp. 25–35.
6. Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC)10.1016/j.cemconres.2013.11.002 ↗
7. E. Denarié, E. Brühwiler, Structural rehabilitations with ultra high performance fibre reinforced concretes, Int. J. Restor. Build. Monuments 12 (MCS-ARTICLE-2007-011) (2006) 453–465.10.1515/rbm-2006-6083 ↗
8. Effects of fiber shape, aspect ratio, and volume fraction on flexural behavior of ultra-high-performance fiber-reinforced cement composites10.1016/j.compstruct.2017.04.069 ↗
9. Assessing drying shrinkage and water permeability of reactive powder concrete produced in Hong Kong10.1016/j.conbuildmat.2011.05.006 ↗
10. Experimental performance of concrete-encased CFST columns subjected to full-range fire including heating and cooling10.1016/j.engstruct.2018.03.042 ↗
11. Buckling behavior of circular steel tubes infilled with C170/185 ultra-high-strength concrete under fire10.1016/j.engstruct.2020.110523 ↗
12. Assessment and repair of fire-damaged concrete structures-an update
13. Effects of re-curing on residual mechanical properties of concrete after high temperature exposure10.1016/j.conbuildmat.2017.11.005 ↗
14. Microstructures of fire-damaged concrete
15. Strength and durability recovery of fire-damaged concrete after post-fire-curing10.1016/S0008-8846(01)00582-8 ↗
16. Compressive strength of concrete at high temperatures: a reassessment10.1680/macr.1992.44.161.291 ↗
17. Physicochemical and mechanical changes of thermally damaged cement pastes and concrete for re-curing conditions10.1016/j.cemconres.2019.105831 ↗
18. Effects of re-curing on microstructure of concrete after high temperature exposure10.1016/j.conbuildmat.2018.02.122 ↗
19. Effects of post-fire curing conditions on the restoration of material properties of fire-damaged concrete10.1016/j.conbuildmat.2015.09.015 ↗
20. Multi-response optimization of post-fire residual compressive strength of high performance concrete10.1016/j.conbuildmat.2012.08.048 ↗
21. Mechanical properties of concrete at high temperature—a review10.1016/j.conbuildmat.2015.05.131 ↗
22. Effects of elevated temperature and water quenching on strength and microstructure of mortars with river sand substitutes10.1016/j.conbuildmat.2016.03.189 ↗
23. Effects of cement dosage and cooling regimes on the compressive strength of concrete after post-fire-curing from 800 °C10.1016/j.conbuildmat.2017.03.053 ↗
24. Analysis of the effect of heating and re-curing on the microstructure of high-strength concrete using X-ray CT10.1016/j.conbuildmat.2013.11.007 ↗
25. A.S.T. Mater., ASTM C 109/C 109 M-11, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or 50-mm Cube Specimens), 2011.
26. Concrete gas permeability from different methods: correlation analysis10.1016/j.cemconcomp.2019.103379 ↗
27. Experimental and numerical study of the relative humidity effect on drying shrinkage and cracking of self-consolidating concrete10.1016/j.cemconres.2018.08.008 ↗
28. High temperature behaviour of self-consolidating concrete10.1016/j.cemconres.2009.10.006 ↗
29. Effects of heating followed by water quenching on strength and microstructure of ultra-high performance concrete10.1016/j.conbuildmat.2019.02.123 ↗
30. Comparison of the strength and durability performance of normal-and high-strength pozzolanic concretes at elevated temperatures10.1016/S0008-8846(01)00580-4 ↗
31. Investigation of the structure of heated Portland cement paste by using various techniques10.1016/j.conbuildmat.2012.09.071 ↗
32. Heat deformations of cement paste phases and the microstructure of cement paste10.1007/BF02473981 ↗
33. Effect of silica fume on mechanical properties of high-strength concrete10.1016/S0958-9465(03)00017-9 ↗
34. Behaviour of cement concrete at high temperature
35. W.A. Deer, R.A. Howie, J. Zussman, Rock-forming minerals: single-chain silicates, Volume 2A, Geological Society of London, 1997.
36. Effect of elevated temperature on physico-mechanical properties of blended cement concrete10.1016/j.conbuildmat.2010.06.078 ↗
37. The use of thermal analysis in assessing the effect of temperature on a cement paste10.1016/j.cemconres.2004.06.015 ↗
38. Quantitative analysis of phase transition of heated Portland cement paste10.1007/s10973-012-2600-3 ↗
39. Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars10.1016/j.cemconres.2007.02.005 ↗
40. The hardening behavior of γ-C2S binder using accelerated carbonation10.1016/j.conbuildmat.2016.03.208 ↗
41. Combined curing as a novel approach to improve resistance of ultra-high performance concrete to explosive spalling under high temperature and its mechanical properties10.1016/j.cemconres.2018.04.011 ↗
42. Effect of alkali cation type on strength endurance of fly ash geopolymers subject to high temperature exposure10.1016/j.matdes.2018.05.023 ↗
43. Permeability and pore structure evolution of silicocalcareous and hematite high-strength concretes submitted to high temperatures10.1007/BF02482129 ↗
44. Phase development in normal and ultra high performance cementitious systems by quantitative X-ray analysis and thermoanalytical methods10.1016/j.cemconres.2008.11.003 ↗