journal article·2021-07Open access

Evolutionary artificial intelligence approach for performance prediction of bio-composites

Muhammad Riaz Ahmad, Bing Chen, Jian-Guo Dai, Syed Minhaj Saleem Kazmi, Muhammad Junaid Munir

Abstract

Abstract Giving the high amount of carbon and energy emission from the use of traditional building materials, the use of bio-composites made from industrial crops especially hemp has caught attention from researchers in recent years. These bio-composites not only enhance the thermal performance of buildings but also promote sustainable development due to their eco-friendly nature. Due to their highly heterogeneous nature, however, most of the existing studies on the bio-composites have only focused on experimental investigations, while mathematical modeling of physical, thermal and mechanical properties of bio-composite remains a challenge for the researchers. In this paper, an artificial intelligence (AI) based gene expression programming (GEP) technique is used to develop the mathematical models for predicting the dry density, compressive strength and thermal conductivity of hemp-based bio-composites. A large amount of database was established based on past studies and the most influential parameters were identified by several trial analyses. The proposed mathematical models showed a high correlation with the experimental results. All the models passed the statistical and performance index checks showing strong predictability, generalization capability and high accuracy of GEP-AI models. Comparison of results with the regression analysis techniques further proved the superiority of GEP-AI models over the traditional methods.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hygrothermal properties of building materials · Natural Fiber Reinforced Composites · Bamboo properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (93)

Show source-provided references
1. D. Reidmiller, C.W. Avery, D.R. Easterling, K.E. Kunkel, K.L.M. Lewis, T.K. Maycock,, et al. Fourth national climate assessment. Vol II Impacts, Risks, Adapt United States, Report-in-Br 2017.
2. Nations U. Energy Statistics Pocket Book 2018.
3. Key world energy statistics
4. Ürge-Vorsatz · 2012 · 649
5. Buildings and climate change: Summary for decision-makers
6. économiques O de coopération et de développement. Transition to Sustainable Buildings: Strategies and Opportunities to 2050. OECD Publishing; 2013.
7. A review on emission analysis in cement industries10.1016/j.rser.2011.02.014 ↗
8. The effect of long term weathering on hemp and rapeseed concrete10.1016/j.cemconres.2020.106014 ↗
9. IEA. Global cement production 2018. https://www.iea.org/fuels-and-technologies/cement (accessed September 9, 2020).
10. What is green concrete?
11. Recycle option for metallurgical by-product (Spent Foundry Sand) in green concrete for sustainable construction10.1016/j.jclepro.2017.10.255 ↗
12. A review of the factors affecting the properties and performance of hemp aggregate concretes
13. Influence of type of binder and size of plant aggregate on the hygrothermal properties of bio-concrete10.1016/j.conbuildmat.2020.118981 ↗
14. Physical properties of Australian hurd used as aggregate for hemp concrete
15. The thermal performance of lime hemp concrete (LHC) with alternative binders10.1016/j.enbuild.2019.109740 ↗
16. K. Gu, B. Chen, Research on the incorporation of untreated flue gas desulfurization gypsum into magnesium oxysulfate cement, J. Clean. Prod. (2020); 271: 10.1016/j.jclepro.2020.12249710.1016/j.jclepro.2020.122497 ↗
17. Etude des caractéristiques environnementales du chanvre par l’analyse de son cycle de vie
18. Preliminary study of the mechanical and hygrothermal properties of hemp-magnesium phosphate cements10.1016/j.conbuildmat.2015.12.081 ↗
19. Experimental study of parameters influencing mechanical properties of hemp concretes10.1016/j.conbuildmat.2011.07.052 ↗
20. Mechanical properties and durability of hemp-lime concretes10.1016/j.conbuildmat.2014.02.065 ↗
21. Moisture transfer and thermal properties of hemp–lime concretes10.1016/j.conbuildmat.2014.04.081 ↗
22. Effect of compaction on mechanical and thermal properties of hemp concrete10.1080/19648189.2010.9693246 ↗
23. Kioy S. Lime-hemp composites: compressive strength and résistance to fungal attacks. MEng dissertation, recalled in Appendix 1: Resistance to compression and stress-strain properties 2013.
24. Cérézo · 2005
25. Hygric properties and thermal conductivity of a new insulation material for building based on date palm concrete10.1016/j.conbuildmat.2017.08.025 ↗
26. Durability of hemp concretes exposed to accelerated environmental aging10.1016/j.conbuildmat.2020.119043 ↗
27. Impact of hemp shives aggregate mineralization on physical–mechanical properties and structure of composite with cementitious binding material10.1016/j.indcrop.2015.09.011 ↗
28. Use of magnesium oxide-cement binder in composites based on hemp shives
29. Performance of lightweight hemp concrete with alkali-activated cenosphere binders exposed to elevated temperature10.1016/j.conbuildmat.2019.07.069 ↗
30. Influence of chemical treatments of miscanthus stem fragments on polysaccharide release in the presence of cement and on the mechanical properties of bio-based concrete materials10.1016/j.cemconcomp.2019.103429 ↗
31. Development of a sustainable and innovant hygrothermal bio-composite featuring the enhanced mechanical properties10.1016/j.jclepro.2019.05.002 ↗
32. Compressive strength assessment of concrete containing metakaolin using ANN
33. Neural networks for lateral torsional buckling strength assessment of cellular steel I-beams10.1177/1369433219836176 ↗
34. Compressive strength prediction by ANN formulation approach for FRP confined rectangular concrete columns
35. Adaptive neuro-fuzzy inference system and stepwise regression for compressive strength assessment of concrete containing metakaolin
36. Hosseinpour M, Sharifi Y, Sharifi H. Neural network application for distortional buckling capacity assessment of castellated steel beams. Structures, vol. 27, Elsevier; 2020, p. 1174–83.10.1016/j.istruc.2020.07.027 ↗
37. Shear strength assessment of slender reinforced normal concrete beams using artificial neural networks
38. The application of machine learning methods for prediction of metal sorption onto biochars10.1016/j.jhazmat.2019.06.004 ↗
39. Predicting PM10 concentration in Seoul metropolitan subway stations using artificial neural network (ANN)10.1016/j.jhazmat.2017.07.050 ↗
40. Hybrid ultrasonic-neural prediction of the compressive strength of environmentally friendly concrete screeds with high volume of waste quartz mineral dust10.1016/j.jclepro.2018.12.059 ↗
41. Analytical and genetic programming model of compressive strength of eco concretes by NDT according to curing temperature10.1016/j.conbuildmat.2017.03.123 ↗
42. Optimizing asphalt mix design process using artificial neural network and genetic algorithm10.1016/j.conbuildmat.2018.02.118 ↗
43. ANN prediction of cement mortar compressive strength, influence of cement strength class10.1016/j.conbuildmat.2017.01.132 ↗
44. A. Nazari, S. Riahi. Composites : Part B Prediction split tensile strength and water permeability of high strength concrete containing TiO 2 nanoparticles by artificial neural network and genetic programming, 2011;42:473–88. doi:10.1016/j.compositesb.2010.12.004.10.1016/j.compositesb.2010.12.004 ↗
45. S. Mohammad, P. Aminian, A. Hossein, A. Hossein, Advances in engineering software A new predictive model for compressive strength of HPC using gene expression programming 2012;45:105–14. doi:10.1016/j.advengsoft.2011.09.014.10.1016/j.advengsoft.2011.09.014 ↗
46. C. Ferreira, Gene Expression Programming : A New Adaptive Algorithm for Solving Problems 2001:1–22.
47. S. Jafari, S. Saeed, Lightweight concrete design using gene expression programing 2017;139:93–100.10.1016/j.conbuildmat.2017.01.120 ↗
48. S.B.B. Aval, H. Ketabdari, S.A. Gharebaghi, Estimating shear strength of short rectangular reinforced concrete columns using nonlinear regression and gene expression programming, 2017;12:13–23.10.1016/j.istruc.2017.07.002 ↗
49. A. Nazari, M.G. Safarnejad, Prediction early age compressive strength of OPC-based geopolymers with different alkali activators and seashell powder by gene expression programming 2013;39:1433–42.10.1016/j.ceramint.2012.07.086 ↗
50. A. Nazari, F.P. Torgal, Expert Systems with Applications Modeling the compressive strength of geopolymeric binders by gene expression programming-GEP, 2013;40:5427–38.10.1016/j.eswa.2013.04.014 ↗
51. I. Mansouri, E. Mete, K.M. Mosalam, Improved shear strength model for exterior reinforced concrete beam-column joints using gene expression programming, 2020.10.1016/j.engstruct.2020.111563 ↗
52. Y.Z. Murad, R. Hunifat, W. Al-bodour, Case studies in construction materials interior reinforced concrete beam-to-column joints subjected to cyclic loading: shear strength prediction using gene expression programming, 2020;13.10.1016/j.cscm.2020.e00432 ↗
53. Y. Sharifi, A. Moghbeli, New predictive models via gene expression programming and multiple nonlinear regression for SFRC beams, 2020;9.10.1016/j.jmrt.2020.10.026 ↗
54. H. Majidifard, B. Jahangiri, P. Rath, L. Urra, W.G. Buttlar, A.H. Alavi, Developing a prediction model for rutting depth of asphalt mixtures using gene expression programming, 2020.10.1016/j.conbuildmat.2020.120543 ↗
55. M. Nait, M. Abdelfetah, Application of gene expression programming for predicting density of binary and ternary mixtures of ionic liquids and molecular solvents 2020;000:1–12.
56. I. Azim, J. Yang, M. Faisal, M. Farjad, Z. Mahmood, F. Wang, et al. Prediction model for compressive arch action capacity of RC frame structures under column removal scenario using gene expression programming 2020;25:212–28.10.1016/j.istruc.2020.02.028 ↗
57. M. Farjad, Q. Liu, I. Azim, X. Zhu, J. Yang, Prediction of mechanical properties of green concrete incorporating waste foundry sand based on gene expression programming, 2020;384.10.1016/j.jhazmat.2019.121322 ↗
58. L.P. Leon, D. Gay, Gene expression programming for evaluation of aggregate angularity effects on permanent deformation of asphalt mixtures 2019;211:470–8.10.1016/j.conbuildmat.2019.03.225 ↗
59. Koza · 1999
60. Koza · 1992
61. Genetic Programming II: Automatic Discovery of Reusable Programs
62. Ferreira · 2006
63. Utilization of industrial and hazardous waste materials to formulate energy-efficient hygrothermal bio-composites10.1016/j.jclepro.2019.119469 ↗
64. Multiproperty characterization of cleaner and energy-efficient vegetal concrete based on one-part geopolymer binder10.1016/j.jclepro.2019.119916 ↗
65. Development of a new bio-composite for building insulation and structural purpose using corn stalk and magnesium phosphate cement10.1016/j.enbuild.2018.06.007 ↗
66. Development of a sustainable and innovant hygrothermal bio-composite featuring the enhanced mechanical properties10.1016/j.jclepro.2019.05.002 ↗
67. M.R. Ahmad, B. Chen, M.A. Haque, S.F. Ali Shah, Utilization of industrial and hazardous waste materials to formulate energy-efficient hygrothermal bio-composites. J. Clean. Prod. 2019:119469. 10.1016/j.jclepro.2019.119469.10.1016/j.jclepro.2019.119469 ↗
68. Variability of the mechanical properties of hemp concrete10.1016/j.mtcomm.2016.03.003 ↗
69. Mechanical properties of lime–hemp concrete containing shives and fibres10.1016/j.biosystemseng.2009.02.005 ↗
70. Mechanical and thermal properties of lime and hemp concrete (“hempcrete”) manufactured by a projection process10.1016/j.conbuildmat.2007.07.016 ↗
71. Effect of flax shives content and size on the hygrothermal and mechanical properties of flax concrete10.1016/j.conbuildmat.2020.120077 ↗
72. Alternative unfired binders as lime replacement in hemp concrete10.1016/j.conbuildmat.2019.117981 ↗
73. Thermal conductivity of hemp concretes: Variation with formulation, density and water content10.1016/j.conbuildmat.2014.05.039 ↗
74. The effect of a polyacrylic acid viscosity modifying agent on the mechanical, thermal and transport properties of hemp and rapeseed straw concrete10.1016/j.conbuildmat.2019.117536 ↗
75. Effect of water content on the acoustical and thermal properties of hemp concretes10.1016/j.conbuildmat.2016.11.018 ↗
76. Effect of moisture and temperature on thermal properties of three bio-based materials10.1016/j.conbuildmat.2016.02.061 ↗
77. Measurement of thermal properties of biosourced building materials10.1007/s10765-013-1477-0 ↗
78. Assessment of artificial neural network and genetic programming as predictive tools10.1016/j.advengsoft.2015.05.007 ↗
79. New formulations for mechanical properties of recycled aggregate concrete using gene expression programming10.1016/j.conbuildmat.2016.10.114 ↗
80. New prediction models for concrete ultimate strength under true-triaxial stress states: An evolutionary approach10.1016/j.advengsoft.2017.03.011 ↗
81. Novel approach to strength modeling of concrete under triaxial compression10.1061/(ASCE)MT.1943-5533.0000494 ↗
82. Foundations of neural networks, fuzzy systems, and knowledge engineering
83. Probability and statistics in civil engineering
84. Nonlinear genetic-based models for prediction of flow number of asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000154 ↗
85. Prediction of wax appearance temperature using artificial intelligent techniques10.1007/s13369-019-04290-y ↗
86. The genetic algorithm based back propagation neural network for MMP prediction in CO2-EOR process10.1016/j.fuel.2014.02.034 ↗
87. Walker · 2014 · 505
88. Prediction of mechanical properties of green concrete incorporating waste foundry sand based on gene expression programming10.1016/j.jhazmat.2019.121322 ↗
89. I. Azim, J. Yang, M.F. Javed, M.F. Iqbal, Z. Mahmood, F. Wang, et al. Prediction model for compressive arch action capacity of RC frame structures under column removal scenario using gene expression programming. Structures, vol. 25, Elsevier; 2020, p. 212–28.10.1016/j.istruc.2020.02.028 ↗
90. Frank · 1994
92. On some aspects of variable selection for partial least squares regression models10.1002/qsar.200710043 ↗
93. Formulation of flow number of asphalt mixes using a hybrid computational method10.1016/j.conbuildmat.2010.09.010 ↗