journal article·2021-08

A novel thermo-thickening viscosity modifying admixture to improve settlement stability of cement slurry under high temperatures

Xin Chen, Chengwen Wang, Yucheng Xue, Zehua Chen, Jianzhou Jin, Ruihe Wang

Publisher page

Abstract

Abstract The viscosity of cement slurry decreases when the temperature rises, resulting in bleeding and sedimentation issues caused by high temperatures. The available viscosity modifying admixtures (VMAs) usually thicken cement slurry under low temperatures but their performances deteriorate under higher temperatures. This study proposes a novel thermo-thickening VMA (i.e., a thermo-thickening polymer with strong hydrophobicity, HTP); its thickening ability will become stronger with an increase in temperature. HTP helps to compensate for the consecutive viscosity reduction of cement slurry due to temperature increases and yields a constant-consistency cement slurry over a wide temperature range (up to 165 °C). Most importantly, HTP is able to slash the bleeding water exuded from cement slurry and eliminate the compressive-strength/density differences among the upper-middle-lower hardened cement paste segments, resulting in a significant improvement in the settlement stability of cement slurry. Microscopic observations reveal that the HTP molecules may fully stretch in the cement slurry and integrate with cement hydration products, contributing to the uniform micromorphology of hardened cement paste. The novel thermo-thickening VMA imposes a limited impact on the compressive strength, fluid loss and thickening time of cement slurry and is very compatible with various cement additives. Finally, the high-temperature high-density cement slurry system containing HTP exhibits a constant consistency until rapid setting behavior, which suggests that it has good potential for field applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (84)

Show source-provided references
1. Theoretical progress and key technologies of onshore ultra-deep oil/gas exploration10.1016/j.eng.2019.01.012 ↗
2. M. Shaheen, J. Schulz, G.S. Haddad, H. Helou, Cementing under extreme conditions of high pressure and high temperature, in: SPE/IADC Middle East Drilling Technology Conference, Abu Dhabi, United Arab Emirates, 8-10 November 1999, https://doi.org/10.2118/57582-MS.10.2118/57582-MS ↗
3. Nelson · 2006 · 319
4. Influence of water/cement ratio, admixtures and filler on sedimentation and bleeding of cement paste10.1016/j.cemconres.2013.09.003 ↗
5. Research on cements for geothermal and deep oil wells
6. T.E. Allen, F.L. Sands, Why control cement slurry density? in: SPE Asia Pacific Oil and Gas Conference, held in Singapore, 8-10 February 1993, https://doi.org/10.2118/25324-MS.10.2118/25324-MS ↗
7. A simple formula for predicting settling velocity of sediment particles10.1016/S1674-2370(15)30017-X ↗
8. Size and settling velocities of cohesive flocs and suspended sediment aggregates in a trailing suction hopper dredge plume10.1016/j.csr.2010.04.002 ↗
9. Admixtures, workability, vibration and segregation10.1007/BF02481827 ↗
10. Rheological characterization of the structural breakdown process to analyze the stability of flowable mortars under vibration10.1016/j.conbuildmat.2016.11.102 ↗
11. Bleeding characteristics of high consistency heavyweight concrete mixtures10.1016/j.conbuildmat.2018.11.029 ↗
12. Influence of bleeding on properties and microstructure of fresh and hydrated Portland cement paste10.1016/j.conbuildmat.2016.04.059 ↗
13. The effect of ultra-fine admixture on the rheological property of cement paste10.1016/S0008-8846(00)00236-2 ↗
14. S. Regan, J. Vahman, R. Ricky, Challenging the limits: Setting long cement plugs? in: SPE Latin American and Caribbean Petroleum Engineering Conference, held in Port-of-Spain, Trinidad and Tobago, 27-30 April 2003, https://doi.org/10.2118/81182-MS.10.2118/81182-MS ↗
15. R. Pernites, J. Clark, A. Santra, New polymeric high temperature cement retarder with synergistic suspending aid property in fluid loss control polymers, in: SPE International Conference on Oilfield Chemistry, held in Montgomery, Texas, USA, 3-5 April 2017, https://doi.org/10.2118/184556-MS.10.2118/184556-MS ↗
16. A review of the mechanisms of set-retardation in Portland cement pastes containing organic admixtures10.1016/0008-8846(72)90057-9 ↗
17. Cement sheath modification using nanomaterials for long-term zonal isolation of oil wells: Review10.1016/j.petrol.2017.06.047 ↗
18. R.P. Matson, M.J. Rogers, V.C.G. Boncan, R.G. Gandy, The effects of temperature, pressure, and angle of deviation on free water and cement slurry stability, in: 66th Annual Technical Conference and Exhibition of the Society of Petroleum Engineers, held in Dallas, TX, USA, 6-9 October 1991, https://doi.org/10.2118/22551-MS.10.2118/22551-MS ↗
19. Lightweight oil well cement slurry modified with vermiculite and colloidal silicon10.1016/j.conbuildmat.2017.12.243 ↗
20. Rheology and stability of self-compacting concrete cement pastes10.1515/arh-2005-0017 ↗
21. Self-consolidating concrete incorporating new viscosity modifying admixtures10.1016/j.cemconres.2003.10.024 ↗
22. Robustness of self-consolidating concrete incorporating different viscosity-enhancing admixtures
23. Response of self-consolidating cement paste systems containing Acacia Nilotica Gum as an organic admixture10.1016/j.conbuildmat.2016.09.097 ↗
24. Impact of welan gum stabilizer on the dispersing performance of polycarboxylate superplasticizers10.1016/j.cemconres.2015.12.009 ↗
25. Experimental study of cement grout: Rheological behavior and sedimentation10.1016/S0008-8846(02)01036-0 ↗
26. Influence of cement grouts composition on the rheological behaviour10.1016/j.cemconres.2010.11.015 ↗
27. Dense packing of cement pastes and resulting consequences on mortar properties10.1016/S0008-8846(97)00189-0 ↗
28. Recycling of expired cement and aged supplementary cementitious materials based on close packing theory and space filling effect10.1016/j.jclepro.2019.118064 ↗
29. J. Pokhriyal, T. Gaudlip, W.R. Suter, Use of concrete technology for high-density cement systems in south texas, in: SPE Production and Operations Symposium, held in Oklahoma City, Oklahoma, USA, 24-27 March 2001, https://doi.org/10.2118/67259-MS.10.2118/67259-MS ↗
30. Martrix control cementing slurry
31. Interparticle potential and sedimentation behavior of cement suspensions
32. Electrosteric stabilization of concentrated cement suspensions imparted by a strong anionic polyelectrolyte and a non-ionic polymer10.1016/j.cemconres.2006.02.012 ↗
33. Polyelectrolyte effects on the rheological properties of concentrated cement suspensions10.1111/j.1151-2916.2000.tb01489.x ↗
34. A new method for studying bleeding of cement paste10.1016/0008-8846(92)90110-H ↗
35. Viscosity-enhancing admixtures for cement-based materials - An overview10.1016/S0958-9465(98)80006-1 ↗
36. Experimental study on performance of cement-based grouts admixed with fly ash, bentonite, superplasticizer and water glass10.1016/j.conbuildmat.2017.11.034 ↗
37. Effects of mix design parameters on consolidation behaviour of fresh cement-based materials10.1617/s11527-016-0988-0 ↗
38. Properties of cement-fly ash grout admixed with bentonite, silica fume, or organic fiber10.1016/S0008-8846(97)00032-X ↗
39. Evaluation of natural zeolite as a viscosity-modifying agent for cement-based grouts10.1016/j.cemconres.2008.03.007 ↗
40. Beneficial role of nanosilica in cement based materials - A review10.1016/j.conbuildmat.2013.05.052 ↗
41. Nanotechnology in concrete - A review10.1016/j.conbuildmat.2010.03.014 ↗
42. Mechanical and rheological behavior of oil-well cement slurries produced with clinker containing carbon nanotubes10.1016/j.petrol.2014.07.020 ↗
43. Can nanosilica sol prevent oil well cement from strength retrogression under high temperature?10.1016/j.conbuildmat.2017.03.221 ↗
44. Effects of flocculation of cement slurry on groutability of porous media?10.1016/j.conbuildmat.2019.117649 ↗
45. Mechanical, rheological, and stability performance of simulated in-situ cured oil well cement slurries reinforced with alumina nanofibers10.1016/j.petrol.2019.106415 ↗
46. Experimental and modeling study on the non-linear structural build-up of fresh cement pastes incorporating viscosity modifying admixtures10.1016/j.cemconres.2018.02.022 ↗
47. Performance characteristics of cement grouts made with various combinations of high-range water reducer and cellulose-based viscosity modifier10.1016/S0008-8846(03)00214-X ↗
48. Cellulose ethers influence on water retention and consistency in cement-based mortars10.1016/j.cemconres.2010.09.004 ↗
49. Cellulose ethers and cement paste permeability10.1016/j.cemconres.2015.02.013 ↗
50. Influence of thixotropy on stability characteristics of cement grout and concrete
51. A. Doan, A. Brandl, M. Vorderbruggen, D.D. Leonard, Innovative well cementing applications by using large particle sizes of cement additives, in: SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, held in Nusa Dua, Bali, Indonesia, 20-22 October 2015, https://doi.org/10.2118/176102-MS.10.2118/176102-MS ↗
52. Chemical modification of biopolymers to design cement slurries with temperature-activated viscosification - A laboratory study10.2118/141005-PA ↗
53. Working mechanism of methyl hydroxyethyl cellulose (MHEC) as water retention agent10.1016/j.cemconres.2012.03.016 ↗
54. Cellulose ethers and water retention10.1016/j.cemconres.2013.06.010 ↗
55. Properties comparison of mortars with welan gum or cellulose ether10.1016/j.conbuildmat.2015.10.116 ↗
56. K.H. Khayat Use of viscosity-modifying admixture to reduce top-bar effect of anchored bars cast with fluid concrete ACI Mater. J. 95 1998 158 167 https://doi.org/10.14359/36110.14359/361 ↗
57. Performance of new viscosity modifying admixtures in enhancing the rheological properties of cement paste10.1016/S0008-8846(03)00233-3 ↗
58. Rheological properties of grouts with viscosity modifying agents as diutan gum and welan gum incorporating pulverised fly ash10.1016/j.cemconres.2006.05.016 ↗
59. Prevention of bleeding of particulate grouts using biopolymers10.1016/j.conbuildmat.2018.10.131 ↗
60. Studies on chitosan as an admixture for cement-based materials: Assessment of its viscosity enhancing effect and complexing ability for heavy metals10.1002/app.33048 ↗
61. Optimisation of rheological parameters and mechanical properties of superplasticised cement grouts containing metakaolin and viscosity modifying admixture10.1016/j.conbuildmat.2012.07.102 ↗
62. Utilization of polysaccharides as viscosity modifying agent in self-compacting concrete10.1016/j.conbuildmat.2014.09.017 ↗
63. Study of nopal mucilage and marine brown algae extract as viscosity-enhancing admixtures for cement based materials10.1016/j.conbuildmat.2013.11.068 ↗
64. Early-state water migration characteristics of superabsorbent polymers in cement pastes10.1016/j.cemconres.2019.02.010 ↗
65. P.L. Totten, D.W. Lindsey, B.J. King, High temperature well cement compositions and methods, U.S. Pat. 1993, 5273580.
66. Influence of hydroxypropylguars on rheological behavior of cement-based mortars10.1016/j.cemconres.2014.01.020 ↗
67. Science and technology of concrete admixtures
68. Polymer flooding review
69. Status of polymer-flooding technology
70. Polymeric formulations used for loss circulation materials and wellbore strengthening applications in oil and gas wells: A review10.1016/j.petrol.2019.05.022 ↗
71. Loss circulation in drilling and well construction: The significance of applications of crosslinked polymers in wellbore strengthening: A review10.1016/j.petrol.2019.106653 ↗
72. On the frictional contribution to the viscosity of cement and silica pastes in the presence of adsorbing and non adsorbing polymers10.1016/j.cemconres.2008.08.002 ↗
73. Investigation on rheological properties and thickening mechanism of a novel thickener based on hydrophobically associating water-soluble polymer during the acid rock reaction10.1016/j.petrol.2019.106895 ↗
74. Steady and transient flow behavior of fresh cement pastes10.1016/j.cemconres.2004.08.001 ↗
75. X. Chen, C. Wang, Y. Wang, H. Wang, R. Wang, Prevention strategy of cement slurry sedimentation under high temperature. Part 1: A polymer with continuous thermo-thickening behavior from 48 to 148 oC, J. Phys. Chem. C 123 (2019) 18573-18584, https://doi.org/10.1021/acs.jpcc.9b05255.10.1021/acs.jpcc.9b05255 ↗
76. America Petroleum Institute · 2013
77. Chemical admixtures - Chemistry, applications and their impact on concrete microstructure and durability10.1016/j.cemconres.2015.05.016 ↗
78. Design methodology and mechanical properties of superabsorbent polymer (SAP) cement-based materials10.1016/j.conbuildmat.2019.01.206 ↗
79. Adsorption behavior and mechanism of a copolymer used as fluid loss additive in oil well cement10.1016/j.conbuildmat.2018.11.184 ↗
80. Role of colloidal polymer associates for the effectiveness of hydroxyethyl cellulose as a fluid loss control additive in oil well cement10.1002/app.36529 ↗
81. Preparation and performance of a lignosulfonate-AMPS-itaconic acid graft copolymer as retarder for modified phosphoaluminate cement10.1016/j.conbuildmat.2014.02.064 ↗
82. A high temperature retarder HTR-300L applied in long cementing interval10.1016/S1876-3804(13)60087-7 ↗
83. Effects of submicron core-shell latexes with different functional groups on the adsorption and cement hydration10.1016/j.conbuildmat.2018.06.079 ↗
84. SY, T Evaluation method for well cement additives-Part 1: Retarder National Energy Administration of China. 5504.1-2013.