journal article·2021-09

Combined effect of slag and clay brick powder on the hydration of blended cement

Yasong Zhao, Jianming Gao, Zhenhai Xu, Shujun Li, Xu Luo, Gaofeng Chen

Publisher page

Abstract

Abstract The slag from industrial byproduct and clay brick powder (CBP) from construction waste were used to replace 30% Portland cement for preparing blended cement. This research investigated the hydration heat, hydration products, microstructure and macro-mechanical properties of blended cement to reveal the combined effect of slag and CBP on hydration. The test results indicate that 30% slag and CBP can increase 11.4 ~ 13.7% peak value of C3S hydration, but the C3A hydration is more affected by slag than CBP. Meanwhile, the 144-h cumulative heat of blended cement hydration is reduced by 4.1 ~ 21.3% compared to Portland cement. The slag and CBP have an improvement effect on the mechanical strength of mortars before and after 90 d, respectively. The mechanical strength of mortars containing both slag and CBP can develop continuously for a long time and reaches the highest value of 53.5 MPa. The slag can consume more portlandite than CBP before 90 d, the portlandite contents in C7B0 and C7B100 at 90 d are 11.6% and 13.3%, respectively. But after 90 d, the CBP will react with more portlandite for its pozzolanic activity. Some different morphologies of CASH can be observed in blended cement paste due to the variation of Al/Si and Ca + Mg/Al + Si in CASH. It could be concluded the combined effect of slag and CBP will led to a high hydration degree at an early stage and continuous hydration for a long time in blended cement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. The influence of chemical admixtures on the strength and hydration behavior of lime-based composite cementitious materials10.1016/j.cemconcomp.2019.05.008 ↗
2. The particle-size effect of waste clay brick powder on its pozzolanic activity and properties of blended cement10.1016/j.jclepro.2019.118521 ↗
3. Application of waste brick powder in alkali activated aluminosilicates: functional and environmental aspects10.1016/j.jclepro.2018.05.181 ↗
4. Assessing the effectiveness of pozzolans in massive high strength concrete10.1016/j.conbuildmat.2010.04.049 ↗
5. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
6. Hydration of cementitious materials, present and future10.1016/j.cemconres.2011.03.026 ↗
7. Utilization potential of aerated concrete block powder and clay brick powder from C&D waste10.1016/j.conbuildmat.2019.117721 ↗
8. Chloride transport and induced steel corrosion in recycled aggregate concrete: A review10.1016/j.conbuildmat.2021.122547 ↗
9. A review of recycled aggregate in concrete applications (2000–2017)10.1016/j.conbuildmat.2018.03.240 ↗
10. Macro- and microproperties of multi-recycled aggregate concrete10.1016/j.jclepro.2019.118843 ↗
11. Properties of cementitious materials with recycled aggregate and powder both from clay brick waste
12. Mechanical properties of concrete mixed with recycled powder produced from construction and demolition waste10.1016/j.jclepro.2018.03.277 ↗
13. Reuse research progress on waste clay brick10.1016/j.proenv.2016.02.029 ↗
14. The utilization of eco-friendly recycled powder from concrete and brick waste in new concrete: A critical review10.1016/j.cemconcomp.2020.103807 ↗
15. Mechanical properties and water absorption of cement composites with various fineness and contents of waste brick powder from C&D waste10.1016/j.cemconcomp.2020.103758 ↗
16. Study on the essential properties of recycled powders from construction and demolition waste10.1016/j.jclepro.2019.119865 ↗
17. Long-term effects of waste brick powder addition in the microstructure and service properties of mortars10.1016/j.conbuildmat.2018.06.161 ↗
18. Eco-efficient alkali-activated cement based on red clay brick wastes suitable for the manufacturing of building materials10.1016/j.jclepro.2017.07.243 ↗
19. Study on the pozzolanic reaction of clay brick powder in blended cement pastes10.1016/j.conbuildmat.2019.03.307 ↗
20. Effect of alkali activator concentration and curing condition on strength and microstructure of waste clay brick powder-based geopolymer10.1016/j.compositesb.2017.10.013 ↗
21. Hydration of slag-blended cements10.1016/j.cemconcomp.2012.05.007 ↗
22. The effect of fineness on the properties of the blended cements incorporating ground granulated blast furnace slag and ground basaltic pumice10.1016/j.conbuildmat.2005.11.005 ↗
23. Hydration, structure, and properties of blast furnace slag cements, mortars, and concrete
24. Mechanisms of cement hydration10.1016/j.cemconres.2010.09.011 ↗
25. Understanding the filler effect on the nucleation and growth of C-S-H10.1111/jace.13177 ↗
26. A new approach in quantitative in-situ XRD of cement pastes: correlation of heat flow curves with early hydration reactions10.1016/j.cemconres.2010.09.014 ↗
27. Mechanisms and parameters controlling the tricalcium aluminate reactivity in the presence of gypsum10.1016/j.cemconres.2007.06.001 ↗
28. Early-age hydration and mechanical properties of high volume slag and fly ash concrete at different curing temperatures10.1016/j.conbuildmat.2017.05.080 ↗
29. Investigation of phase composition and microstructure of foamed cement paste with different supplementary cementing materials10.1016/j.cemconcomp.2020.103560 ↗
30. V. Kocaba, Development and evaluation of methods to follow microstructural development of cementitious systems including slags, Thèse EPFL, n° 4523, 2009.
31. Long-term hydration and microstructure evolution of blended cement containing ground granulated blast furnace slag and waste clay brick10.1016/j.cemconcomp.2021.103982 ↗
32. Taylor · 1997
33. Solid state 27 Al NMR and FTIR study of lanthanum aluminosilicate glasses10.1016/S0022-3093(99)00555-4 ↗
34. Structure of calcium silicate hydrate (C-SH):near-, mid-, and far-infrared spectroscopy
35. Quantitative analysis of synthetic calcium carbonate polymorphs using FT-IR spectroscopy10.1016/S0039-9140(02)00638-0 ↗
36. Analysis of the system 3CaO·Al2O3–CaSO4·2H2O–CaCO3–H2O by FT-IR spectroscopy10.1016/S0008-8846(01)00502-6 ↗
37. Observation of phase transformations in cement during hydration10.1016/j.conbuildmat.2015.10.027 ↗
38. Waste to resource conversion of crumb rubber for production of sulphuric acid resistant concrete10.1016/j.conbuildmat.2018.11.040 ↗
39. Advances in understanding hydration of Portland cement10.1016/j.cemconres.2015.05.025 ↗
40. An X-ray diffraction (XRD) and Fourier transform infrared spectroscopic (FT-IR) characterization of the speciation of arsenic (V) in Portland cement type-V10.1016/S0048-9697(98)00318-0 ↗
41. Properties and microstructure of alkali-activated red clay brick waste10.1016/j.conbuildmat.2013.01.031 ↗
42. Petrographic characterization of Portlandite crystal sizes in cement pastes affected by different hydration environments10.1016/j.conbuildmat.2018.06.142 ↗