Experimental study of RC jacketed and CFRP strengthened RC beams
Source abstract
Abstract
Abstract This paper presents the results of an experimental study on retrofitting RC beams using FRP strengthening and RC jacketing. Three-point loadings are applied to twelve strengthened beams and three reference specimens to put the two techniques into perspective. Formation of first cracks, FRP debonding, and onset of concrete crushing are compared and discussed. Load–deflection behavior, failure modes, and crack propagation patterns are studied extensively. The experiments demonstrate that the RC jacketed beams exhibit a flexural failure identical to the reference beams. However, the FRP strengthened beams fail in a relatively small deflection due to the premature FRP debonding. Furthermore, the both techniques noticeably enhance strength and energy dissipation capacity. The applied RC jacketing can also improve ductility; however, the FRP method cannot provide sufficient ductility. Therefore, the RC jacketing can be used in seismic zones as an alternative to the FRP method. In addition, conventional analytical methods are applied for evaluation of ultimate moment, and the results are compared with the experiments. Good agreement between the results verifies the analyses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Flexural strengthening of concrete beams using externally bonded composite materials10.1016/S0950-0618(09)90034-4 ↗
2. FRP-strengthened RC beams. I: review of debonding strength models10.1016/S0141-0296(01)00105-5 ↗
3. FRP-strengthened RC beams. II: assessment of debonding strength models10.1016/S0141-0296(01)00106-7 ↗
4. Flexural strengthening of concrete beams using CFRP, GFRP and hybrid FRP sheets10.1016/j.conbuildmat.2012.07.052 ↗
5. Analysis of reinforced concrete beams strengthened with FRP laminates10.1061/(ASCE)0733-9445(2000)126:6(684) ↗
6. Cracking and deformability of concrete flexural sections with fiber reinforced polymer10.1061/(ASCE)0733-9445(2002)128:9(1195) ↗
7. Experimental and nonlinear finite element studies of RC beams strengthened with FRP plates10.1016/j.compositesb.2005.12.003 ↗
8. Grooving as alternative method of surface preparation to postpone debonding of FRP laminates in concrete beams10.1061/(ASCE)CC.1943-5614.0000117 ↗
9. Externally bonded reinforcement in grooves (EBRIG) technique to postpone debonding of FRP sheets in strengthened concrete beams10.1016/j.conbuildmat.2012.09.030 ↗
10. Experimental and analytical investigation of CFRP flexural and shear strengthening efficiencies of RC beams10.1016/j.conbuildmat.2010.09.001 ↗
11. Shear strengthening of RC beams with externally bonded CFRP sheets10.1061/(ASCE)0733-9445(2001)127:4(374) ↗
12. Experimental performances of RC beams strengthened with FRP materials10.1016/j.conbuildmat.2010.03.008 ↗
13. An experimental study of the jacketed reinforced-concrete beams under bending10.1016/j.conbuildmat.2004.04.005 ↗
14. Strengthening of reinforced concrete beams in flexure by partial jacketing10.1617/s11527-008-9397-3 ↗
15. Experimental behavior of jacketed reinforced concrete beams10.1061/(ASCE)0733-9445(2000)126:6(692) ↗
16. Behaviour of RC beams strengthened by partial jacketing under cyclic loading10.1617/s11527-013-0067-8 ↗
17. ACI 318M-08, Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, 2008.
18. Intermediate crack-induced debonding in RC beams and slabs10.1016/S0950-0618(03)00043-6 ↗
19. ACI 440.2R-08, Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, American Concrete Institute, 2008.
20. Park · 1975