Reconstruction and evaluation of the air permeability of a cement paste specimen with a void distribution gradient using CT images and numerical methods
Source abstract
Abstract
Abstract Concrete is a multi-phase and random heterogeneous material composed mainly of water, aggregate, and cement. The spatial distribution of these constituents strongly affects material performance. In addition, the voids present in cast concrete permit the passage of most air and water through the material, which significantly affects permeability and durability. Therefore, a proper investigation of the void distribution within concrete is important in evaluating its material characteristics. To visualize and investigate the spatial distribution of voids in a concrete specimen, X-ray CT images and probabilistic methods, including reconstruction, are used in this study. Two cement paste specimens with different void ratios are prepared, and a virtual specimen with a gradient distribution of voids through its thickness is reconstructed from the two real specimens. The characteristics of the void distribution for all three specimens are then examined using low-order probability functions and tortuosity. In addition, the permeability of each specimen is evaluated using finite element (FE) simulation, which is then compared with experimental data. From these results, we can confirm that the proposed reconstruction method can effectively generate a virtual cement paste specimen with a specific void distribution. Thus, the simulation tools adopted in this study can be utilized to supplement time-consuming experiments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Groundwater flow and contamination studies · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Neville · 2012
2. Evaluation of high-performance porous concrete properties10.1016/j.conbuildmat.2011.12.024 ↗
3. Investigation of the permeability of porous concrete reconstructed using probabilistic description methods10.1016/j.conbuildmat.2014.06.013 ↗
4. Scanning electron microscopy imaging of hydraulic cement microstructure10.1016/j.cemconcomp.2004.02.043 ↗
5. Identification and quantification of cracks in concrete by optical fluorescent microscopy10.1016/j.cemconres.2006.05.011 ↗
6. Mercury porosimetry of hardened cement pastes10.1016/S0008-8846(99)00083-6 ↗
7. X-ray microtomographic studies of pore structure and permeability in Portland cement concrete
8. 3d experimental investigation of the microstructure of cement pastes using synchrotron X-ray microtomography10.1016/j.cemconres.2006.10.012 ↗
9. Computations of permeability tensor coefficients and anisotropy of asphalt concrete based on microstructure simulation of fluid flow10.1016/j.commatsci.2007.01.015 ↗
10. Computational investigation on mass diffusivity in portland cement paste based on X-ray computed microtomography image10.1016/j.conbuildmat.2011.07.017 ↗
11. Application of x-ray computed tomography to characterise the early hydration of calcium aluminate cement10.1016/S0958-9465(01)00063-4 ↗
12. Three-dimensional imaging of cement microstructure evolution during hydration10.1680/adcr.2005.17.3.103 ↗
13. Quantitative characterization of spatial clustering in three-dimensional microstructures using two-point correlation functions10.1016/j.actamat.2003.09.016 ↗
14. Constraints on microstructural two-point correlation functions10.1016/j.scriptamat.2005.06.013 ↗
15. Torquato · 2002
16. Correlation between low-order probability distribution functions and percolation of porous concrete10.1680/macr.12.00125 ↗
17. Reconstruction of random two-phase polycrystalline solids using low-order probability functions and evaluation of mechanical behavior10.1016/j.commatsci.2010.06.014 ↗
18. Two-point cluster function for continuum percolation10.1063/1.454440 ↗
19. Electrical and thermal tortuosity in powder compacts10.1007/s10035-007-0061-3 ↗
20. X-ray micro-computed tomography and tortuosity calculations of percolating pore networks10.1016/j.actamat.2014.03.003 ↗
21. Reconstructing random media10.1103/PhysRevE.57.495 ↗
22. Reconstructing random media. II. Three-dimensional media from two-dimensional cuts10.1103/PhysRevE.58.224 ↗
23. Reconstruction of the structure of dispersions10.1006/jcis.1996.4675 ↗
24. Using microstructure reconstruction to model mechanical behavior in complex microstructures10.1016/j.mechmat.2005.06.030 ↗
25. Acquisition of capillary pore structure by X-ray ct and visualization of flow by numerical analysis10.4028/www.scientific.net/AMR.845.163 ↗
26. Underwood · 1970
27. Extraction of morphological quantities from a digitized medium10.1063/1.359134 ↗
28. Lineal-path function for random heterogeneous materials10.1103/PhysRevA.45.922 ↗
29. Measure of clustering in continuum percolation: computer-simulation of the two-point cluster function10.1063/1.457190 ↗
30. Generalized best-first search strategies and the optimality of a*10.1145/3828.3830 ↗
31. 2013
32. Upscaling of navier-stokes equations in porous media: Theoretical, numerical and experimental approach10.1016/j.compgeo.2009.05.006 ↗
33. Characterizing pore volume, sizes, and connectivity in pervious concretes for permeability prediction10.1016/j.matchar.2010.05.004 ↗
34. Simulation of heat transfer to separation air flow in a concentric pipe10.1016/j.icheatmasstransfer.2014.07.008 ↗