Experimental study on the flexural behaviour of multi-span transparent glass–GFRP composite beams
Source abstract
Abstract
Abstract In recent years there have been an increasing number of applications of glass in civil engineering structural members, such as roofs, floors, beams and columns. Such interest stems basically from the aesthetical possibilities of glass, in particular its transparency. However, glass presents several limitations, including relatively low tensile strength and brittle behaviour, which contrasts with current design philosophies associated with more conventional materials, such as steel and reinforced concrete. One of the possibilities of overcoming these disadvantages is joining reinforcing materials to glass. The main goal of those transparent composite structural solutions is to increase the post-cracking residual strength and ductility of glass beams. This paper presents results of an experimental study about the flexural behaviour of multi-span composite beams made of annealed glass panes reinforced with GFRP pultruded laminates. The main goal of this study was to evaluate the post-cracking behaviour of such continuous beams, namely the influence of the adhesive used in their construction. The experimental programme included (i) material characterization tests, (ii) tensile tests on double lap joints between glass and GFRP pultruded laminates, bonded with different structural adhesives, and (iii) full-scale flexural tests on multi-span glass–GFRP composite beams, with interfaces bonded also with different adhesives. Results showed that multi-span glass–GFRP composite beams are able to exhibit significant post-cracking residual strength and ductility, stemming not only from their cross-sectional redundancy but also from their capacity to redistribute internal forces. The ultimate load and the post-cracking performance of the multi-span composite beams are significantly affected by the type of the adhesive used to bond GFRP to glass.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Analysis of Composite Materials · Civil and Structural Engineering Research · Structural Engineering and Vibration Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Adhesively bonded reinforced glass beams
2. Timber glass composite griders for an hotel in Switzerland10.2749/101686604777963964 ↗
3. Design of mechanically reinforced glass beams: modelling and experiments10.2749/101686609788220169 ↗
4. Louter C, Leung C, Kolstein H, Vambersky J. Structural Glass Beams with Embedded Glass Fibre Reinforcement. In: Bos, Louter, Veer Eds. Proceedings of challenging glass 2 conference on architectural and structural applications of glass, Delft, The Netherlands; 2010.
5. Ductility and post-cracking strength of glass beams strengthened with GFRP pultruded composites10.1016/j.compstruct.2011.03.018 ↗
6. System ductility and redundancy of FRP beam structures with ductile adhesive joints10.1016/j.compositesb.2005.05.001 ↗
7. GFRP–concrete hybrid cross-sections for floors of buildings10.1016/j.engstruct.2008.04.021 ↗
8. Flexural behaviour of multi-span GFRP–concrete hybrid beams10.1016/j.engstruct.2009.02.004 ↗
9. Structural response of SG-laminated reinforced glass beams; experimental investigations on the effects of glass type, reinforcement percentage and beam size10.1016/j.engstruct.2011.12.016 ↗
10. ISO 527. Plastics – Determination of the tensile properties – Part 1: General principles. International organization for standardization, Genève; 1993.
11. ISO 527 Plastics – Determination of the tensile properties – Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites. International organization for standardization, Genève; 1997.
12. ISO 527 Plastics – Determination of the tensile properties – Part 2: Test conditions for moulding and extrusion plastics. International organization for standardization, Genève; 1993.