journal article·2014-06

Preparation and performance of a lignosulfonate–AMPS–itaconic acid graft copolymer as retarder for modified phosphoaluminate cement

Cong Ma, Yuhuan Bu, Bing Chen

Publisher page

Abstract

Abstract In this article, a new type of graft copolymer retarder as modified phosphoaluminate cement (MPC) has been discussed. Graft copolymerization of 2-acrylamido-2-methyl propane sulfonic acid (AMPS) and itaconic acid (IA) onto sodium lignosulfonate (LS) was performed using potassium persulfate as an initiator by free radical aqueous solution copolymerization. The optimal LS/AMPS/IA copolymer (OLSAI) was obtained under the optimum reaction conditions: mass ratio of LS/(AMPS + IA) = 1:1, temperature = 60 °C, mole ratio of AMPS/IA = 9:1, initiator concentration = 1%, pH value = 5. The synthesized copolymer OLSAI was characterized by FTIR analysis. The experimental results demonstrate that the OLSAI has excellent retarding ability, dispersing power, thermal-resistant and pressure-tolerant properties, and little negative impact on the compressive strength of MPC. The graft copolymer OLSAI is expected to be an excellent retarder for MPC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Modification of composition and microstructure of Portland cement pastes as a result of natural and supercritical carbonation procedures10.1021/ie0603363 ↗
2. Heterogeneous porosity distribution in Portland cement exposed to CO2-rich fluids10.1016/j.cemconres.2008.03.022 ↗
3. Sequestration of CO2 in geological media: criteria and approach for site selection in response to climate change10.1016/S0196-8904(99)00149-1 ↗
4. Influence of carbonation and carbonation methods on leaching of metals from mortars10.1016/S0008-8846(03)00255-2 ↗
5. Effect of CO2 on leaching from a cement-stabilized MSWI fly ash10.1016/j.cemconres.2003.11.022 ↗
6. Bruckdorfer RA. Carbon dioxide corrosion in oilwell cements. In: SPE rocky mountain regional meeting, 1986.10.2118/15176-MS ↗
7. Air-foamed calcium aluminate phosphate cement for geothermal wells10.1016/j.cemconcomp.2004.11.003 ↗
8. Ceramic fibre-reinforced calcium aluminate/flyash/polyphosphate cements at a hydrothermal temperature of 280°C10.1680/adcr.2002.14.1.25 ↗
9. Rheological and hydration characterization of calcium sulfoaluminate cement pastes10.1016/j.cemconcomp.2012.01.008 ↗
10. Durability and microstructure analysis of CO2-cured cement-bonded wood particleboard10.1016/j.cemconcomp.2013.04.014 ↗
11. Guo · 2010
12. Fundamental study on aluminophosphate cement10.1016/S0008-8846(99)00111-8 ↗
13. Composite cement of magnesium-bearing phosphoaluminate hydroxyapatite reinforced by treated raw silk fiber10.1016/j.cemconcomp.2007.08.009 ↗
14. Selection and lab research of retarder for phosphoaluminate cement10.4028/www.scientific.net/AMM.174-177.1317 ↗
15. Experimental study on the composite retarder for MPC
16. Preparation and characterization of a newly water soluble lignin graft copolymer from oil palm lignocellulosic waste10.1016/j.carbpol.2010.01.030 ↗
17. API recommended practice 10B. In: Recommended practice for testing well cements. 22nd ed. American Petroleum Institute; 2002.
18. Effects of lignin cellulose and expansive agent on microstructure and macro-property of polymer-modified mortar containing fly ash10.1016/j.conbuildmat.2008.07.005 ↗
19. Mechanical and microstructural characterization of an alkali-activated slag/limestone fine aggregate concrete10.1016/j.conbuildmat.2009.02.022 ↗
20. Cement cake properties in static filtration. Influence of polymeric additives on cement filter cake permeability10.1016/0008-8846(93)90100-N ↗
21. Effect of admixtures on the setting times of high-strength concrete10.1016/S0958-9465(00)00025-1 ↗
22. Modification of lignin and its application as char agent in intumescent flame-retardant poly (lactic acid)10.1002/pen.23214 ↗
23. Adsorption characteristics of superplasticizers on cement component minerals10.1016/S0008-8846(02)00782-2 ↗
24. Synthesis and application of 2-acrylamido-2-methyl propane sulfonic acid/acrylamide/N,N-dimethyl acrylamide/maleic anhydride as a fluid loss control additive in oil well cementing10.1002/app.37745 ↗
25. Chemo-enzymatic synthesis and characterization of graft copolymers from lignin and acrylic compounds10.1016/S0141-0229(00)00214-3 ↗
26. Taguchi · 1987 · 1
27. Infrared and nuclear magnetic resonance evidence of degradation in thermoplastics based on forest products10.1007/BF02074782 ↗
28. Graft copolymers of lignin from straw with 1-thenylbenzene: synthesis and characterization10.1002/1097-4628(20010103)79:1<72::AID-APP80>3.0.CO;2-F ↗
29. Study on carbonization of lignin by TG–FTIR and high-temperature carbonization reactor10.1016/j.fuproc.2012.06.016 ↗
30. Laser Raman and FTIR studies on Li+ interaction in PVAc-LiClO4 polymer electrolytes10.1016/j.saa.2006.02.026 ↗
31. Evaluation of the performance of sulfonated esparto grass lignin as a plasticizer–water reducer for cement10.1016/S0008-8846(02)01098-0 ↗
32. Study of the influence of superplasticizers on the hydration of cement paste using nuclear magnetic resonance and X-ray diffraction techniques10.1016/S0008-8846(01)00636-6 ↗
33. Effect of superplasticizers on the hydration of cement10.1016/0008-8846(92)90095-D ↗