journal article·2015-03

Physico-mechanical characteristics and durability of calcium aluminate blended cement subject to different aggressive media

Mohamed Heikal, M.M. Radwan, O.K. Al-Duaij

Publisher page

Abstract

Abstract Three mixes were prepared from calcium aluminate cement (CAC) and 20 mass% water-cooled (WCS) slag or air-cooled slag (ACS). The pastes were prepared with the required water of standard consistency, cured under tap water until time of testing (1, 3, 7 and 28 days). The durability of calcium aluminate blended cement was investigated by immersing the samples under tap water for 7 days (zero time), and then immersed in 5% sodium chloride, 5% magnesium sulphate and 5% ammonium sulphate as aggressive media. Compressive strength, bulk density and apparent porosity were measured. X-ray diffraction analysis and scanning electron microscopy were studied to reveal their mineralogical and microstructural features. Compressive strength of neat CAC pastes are lower than those of CAC–WCS and CAC–ACS blends. Compressive strength of CAC pastes immersed in 5% NaCl, 5% MgSO4 or 5% (NH4)2SO4 increases with curing time up to 90 days and then shows a slightly decrease up to 120 days immersion time. The presence of Cl− or SO42− ions activates the hydration rate of CAC, CAC–WCS and CAC–ACS. The SEM micrographs of CAC–WCS and CAC–WCS indicate the presence of the thin flaky-plate like morphology of C2ASH8 and thin fibrous particles of C–S–H I,II, which reflects closed and compact texture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Bensted J, Calcium aluminate cements. In: Bensted J., Barnes P, editors, Structure and performance of cements, 2nd ed., London; 2002. p. 114–138.
2. Mangabhai RJ, Scrivener KL, editors. Calcium aluminate cements. Proceedings of the Centenary Conference, Avignon: 30 June–2 July, 2008. Fentiman CH, IHSBRE Press; 2008, EP94.
3. Mangabhai RJ, Glasser FP, editors. Calcium aluminate cements. In: Proc. Int. Conf. on CAC. London: IOM Communications; 2001.
4. 1990
5. High-performance concretes from calcium aluminate cements10.1016/S0008-8846(99)00103-9 ↗
6. Thermal properties of hydrating calcium aluminate cement pastes10.1016/j.cemconres.2009.09.005 ↗
7. Kinetic modeling of calcium aluminate cement hydration10.1016/j.ces.2010.08.012 ↗
8. Characteristics of calcium aluminate cements/slag wastes composites
9. Majumdar SD, Sarkar R, Vajifdar PP, Narayanan S, Cursetji RM, Chatterjee AK. User friendly high refractory calcium aluminate cement. In: Proceedings of the International Conference of Calcium Aluminate Cements, 2001, p. 467–476.
10. Dehydration of a layered double hydroxide-C2AH810.1016/j.tca.2007.07.022 ↗
11. Hydration characteristics and durability of calcium aluminate cement containing some blended systems
12. Influence of curing temperature on the physico-mechanical, characteristics of calcium aluminate cement with air-cooled slag or water-cooled slag
13. Electrical conductivity and phase composition of calcium aluminate cement containing air-cooled and water cooled slag at 20, 40 and 60°C10.1016/j.cemconres.2004.09.027 ↗
14. Physico-chemical properties and microstructure of some blended systems
15. Hydration of Secar 71 aluminous cement in presence of granulated blast furnace slag10.1016/0008-8846(90)90111-A ↗
16. The influence of pozzolanic materials on the mechanical stability of aluminous cement10.1016/0008-8846(95)00091-P ↗
17. Research on long term properties of CAC concrete10.1680/macr.1988.40.145.195 ↗
18. Bate SCC. Report on the Failure of Roof Beams at Sir John Cass’s Foundation and Red Coat Church of England Secondry School, Stepney, Garston, Building Research Establishment, CP58174, 1974. p. 18.
19. The conversion of high alumina cement10.1016/0025-5416(76)90085-9 ↗
20. The use of thermoanalytical technique for detection of chemical attack on high alumina cement concrete10.1016/0040-6031(78)85043-6 ↗
21. Sulphate resistance of ‘Goikal 40’ high alumina cement mortar
22. Midgley HG. The chemical resistance of high alumina cement concrete. In: VII Inter Congre Chem Cem, Paris; 1980. p. V85–V87.
23. Corrosion behaviour of steel in high alumina cement mortar samples: effect of chloride10.1016/0008-8846(91)90114-W ↗
24. Accelerated carbonation of Friedel’s salt in calcium aluminate cement paste10.1016/S0008-8846(02)00910-9 ↗
25. The resistance of high alumina cement against corrosion of steel in concrete10.1016/j.conbuildmat.2010.01.023 ↗
26. Corrosion behaviour of steel in high alumina cement mortar cured at 5, 25 and 55°C: Chemical and physical factors10.1007/BF01152936 ↗
27. Effect of curing temperature on corrosion of steel bars embedded in calcium aluminate mortars exposed to chloride solutions10.1016/S0010-938X(98)00075-4 ↗
28. ASTM Standards Cement (C204–79), Amer. Soc. Test. Mater., Philadelphia 1979.
29. DIN 51 064, Bestimmung der Rohdichte, 1985.& DIN 51 056, Bestimmung der Offenen Porositat, 1985.
30. Hennin · Hochsch Archit Banwes Weimar · 1972 · 19
31. Taylor · 1990
32. Chemical activation of calcium aluminate cement composites cured at elevated temperature10.1016/j.cemconcomp.2012.08.002 ↗
33. Study of hydration mechanisms in the high alumina cement–sodium silicate system10.1016/S0008-8846(96)85017-4 ↗
34. Dehydration of a layered double hydroxide–C2AH810.1016/j.tca.2007.07.022 ↗
35. Bentsen S, Seltveit A. Effect of microsilica on conversion high alumina cement. Calcium aluminate cements. In: Mangabhai RJ, editor. London: Chapman and Hall; 1990. p. 294–319.