Partially bonded near-surface-mounted CFRP bars for strengthened concrete T-beams
Source abstract
Abstract
Abstract A partially bonded strengthening approach for reinforced concrete (RC) beams utilizing near-surface-mounted (NSM) carbon fiber reinforced polymer (CFRP) bars was investigated with the specific objective of improving deformability. A total of six RC T-beams strengthened with NSM CFRP bars of various unbonded lengths were tested. Test results showed a decrease of the stiffness at the post-yield stage of the load–deflection response in the partially bonded beams. This is caused by the delayed increase of the FRP strain within the unbonded length. As a result the beam deformability was increased as the unbonded length increased at the same applied load. Internal slip of the FRP bar and gradual concrete failure were observed near the ultimate state, which caused a complicate nonlinear behavior of the beams. An analytical model is proposed to address the complete beam behavior including the effect of slip of FRP reinforcement and gradual concrete crushing. This model was developed based on the compatibility of deformation of the partially bonded system and was able to represent the ultimate behavior of the beams well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. North American design guidelines for concrete reinforcement and strengthening using FRP: principles, applications, and unsolved issues10.1016/S0950-0618(03)00042-4 ↗
2. Teng · 2002
3. ACI 440.2R. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI committee 440.2R, American Concrete Institute; 2008.
4. Concrete Society. Design guidance for strengthening concrete structures using fiber composite, TR55. 2nd ed. Concrete Society; 2004.
5. Behavioral trends of RC beams strengthened with externally bonded FRP10.1061/(ASCE)1090-0268(2001)5:2(102) ↗
6. Near-surface-mounted fiber-reinforced polymer reinforcements for flexural strengthening of concrete structures
7. Flexural strengthening of prestressed bridge slabs with FRP systems10.15554/pcij.01012002.76.93 ↗
8. Bond mechanism of near-surface-mounted fiber-reinforced polymer bars for flexural strengthening of concrete structures
9. A review of ductility determination of FRP strengthened flexural RC elements
10. Experimental study of influence of bond on flexural behavior of concrete beams pretensioned with aramid fiber reinforced plastics
11. Analysis of concrete beams with partially bonded composite reinforcement
12. Flexural response of reinforced concrete beams strengthened with end-anchored partially bonded carbon fiber-reinforced polymer strips10.1061/(ASCE)1090-0268(2005)9:2(170) ↗
13. Choi HT. Flexural behaviour of partially bonded CFRP strengthened concrete T-beams. Ph.D. thesis, University of Waterloo, Waterloo, Ontario, Canada; 2008.
14. Collins MP, Mitchell D. Prestressed concrete basics. Canadian Prestressed Concrete Institute (CPCI), Ottawa, Ontario; 1987.
15. Canadian Standards Association (CSA). Design of concrete structures. CSA standard A23.3-04, Rexdale, Ontario, Canada; 2004.
16. Review of static and dynamic properties of steel reinforcing bars
17. MacGregor JG, Bartlett FM. Reinforced concrete mechanics and design. 1st Canadian ed. Toronto, Ontario: Prentice Hall Canada Inc.; 2000.
18. Analysis of the flexural behavior of partially bonded FRP strengthened concrete beams10.1061/(ASCE)1090-0268(2008)12:4(375) ↗