Field validation of recycled cold mixes viscoelastic properties
Source abstract
Abstract
Abstract Visco-elastic properties of recycled cold mixes are analyzed in this paper by tests carried out in laboratory; the aim of the paper is to evaluate how reliable are these properties to be used for the prediction of visco-elastic response of pavement layers containing recycled cold mixes. The paper focuses on both bitumen emulsion and foam bitumen recycled cold mixes; two different mixtures were designed in laboratory to achieve specific mechanical properties and used to build two instrumented test sections. Visco-elastic properties and fatigue resistance of these mixtures were determined on cores extracted from the test sections and compared with those determined on a conventional hot asphalt mixture for base layer. This comparison allowed to highlight the reduced thermo-sensitive and time-dependant behavior of these mixtures. Visco-elastic properties of the recycled cold mixtures determined in laboratory, then were used to predict strains in the base layer of the test pavements by using the ViscoRoute 2.0 software. The comparison between measured and predicted strain pulses allowed to evaluate the reliability of visco-elastic parameters determined in laboratory to predict response of layers composed of recycled cold mixes. The obtained results show that visco-elastic parameters of bitumen emulsion recycled cold layers exhibit a satisfactorily capacity to accurately reproduce the pavement response; the same reliability cannot be found for foam bitumen recycled cold layers, whose behavior diverges significantly from that of a continuum.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Sustainable pavements: environmental, economic, and social benefits of in situ pavement recycling
2. Halles · 2009 · vol. 2095 · 127
3. Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion10.1016/j.conbuildmat.2008.07.020 ↗
4. A model for resilient modulus determination of recycled mixes with bitumen emulsion and cement from ITS testing results10.1016/j.conbuildmat.2010.04.031 ↗
5. A study on the mechanical behaviour of cement–bitumen treated materials10.1016/j.conbuildmat.2010.07.007 ↗
6. Laboratory fatigue models for recycled mixes with bitumen emulsion and cement10.1016/j.conbuildmat.2010.04.009 ↗
7. An experimental study on fatigue properties of emulsion and foam cold recycled mixes10.1016/j.conbuildmat.2010.04.044 ↗
8. A parametric study on the laboratory fatigue characteristics of recycled mixes10.1016/j.conbuildmat.2010.11.030 ↗
9. Performance evaluation of a cold-recycled mixture containing high percentage of reclaimed asphalt10.1080/14680629.2013.774752 ↗
10. Losa M, Terrosi Axerio A, Bacci R, Leandri P. Design of pavements containing foamed bitumen recycled layers. Bearing capacity of roads, railways and airfields. In: 8th International conference (BCR2A’09); 2009. p. 387–96.10.1201/9780203865286.ch42 ↗
11. Investigating in situ stress-dependent behaviour of foamed asphalt-treated pavement materials10.1080/14680629.2012.742628 ↗
12. Fiber optic sensors for assessing strains in cold in-place recycled pavements10.1080/10298436.2011.614691 ↗
13. Cross · 2003 · vol. 1819B · 152
14. Issa · 2001 · vol. 1767 · 1
15. Leopoldo Research Project website http://leopoldo.pjxp.com/; 2013.
16. Medani TO, Huurman M, Molenaar AAA. On the computation of master curves for bituminous mixes. In; Proc, the 3rd EuroBitume congress, Wien, Austria; 2004.
17. Chabot A, Chupin O, Deloffre L, Duhamel D. ViscoRoute 2.0: a tool for the simulation of moving load effects on asphalt pavement, RMPD special issue on recent advances in numerical simulation of pavements, vol. 11(2), Lavoisier, Paris; 2010. p. 227–50.10.3166/rmpd.11.227-250 ↗
18. Losa · 2012 · vol. 2305 · 150
19. A mathematical-based master-curve construction method applied to complex modulus of bituminous materials10.1080/14680629.2006.9690059 ↗
20. Di Benedetto H, Corté JF. Matériaux routiers bitumineux 1 – description e propriétés des constituants, Lavoisier; 2005.
21. Leandri P, Bacci R, Di Natale A, Rocchio P, Losa M. Appropriate and reliable use of pavement instrumentation on in-service roads. In: Proc, airfield and highway pavement 2013: sustainable and efficient pavements – ASCE 2013, Los Angeles, California, 9–12 June 2013. p. 1424–33.10.1061/9780784413005.120 ↗